December 2023 - dev

[PATCH v4 0/2] Implement explicit outbound address and interface selection
by Stefano Brivio 14 Nov '26

14 Nov '26

v4: In 2/2, use --outbound-if4 and --outbound-if6, by default, to also assign "template" interface indices Stefano Brivio (2): conf, passt.h: Rename "outbound" interface to "template" interface conf, icmp, tcp, udp: Add options to bind to outbound address and interface conf.c | 112 ++++++++++++++++++++++++++++++++++++++++++++++++-------- icmp.c | 24 ++++++++++-- passt.1 | 29 ++++++++++++++- passt.h | 14 ++++++- tcp.c | 60 ++++++++++++++++++++++++++++++ udp.c | 54 ++++++++++++++++++--------- 6 files changed, 252 insertions(+), 41 deletions(-) -- 2.39.2

4 7

[PATCH v2 00/14] Clean up checksum and header generation for inbound packets
by David Gibson 10 Oct '25

10 Oct '25

The main packet "fast paths" for UDP and TCP mostly just forward packets rather than generating them from scratch. However the control paths for ICMP and DHCP sometimes generate packets more or less from scratch. Because these are relatively rare, it's not performance critical. The paths for sending these packets have some duplication of the header generation. There's also some layering violation in tap_ip_send() which both generates IP headers and updates the L4 (UDP or UCMP) checksum. Finally that checksum generation is a little awkward: it temporarily generates the IP pseudo header (or something close enough to serve) in the place of the actual header, generates the checksum, then replaces it with the real IP header. This approach seems to be causing miscompiles with some LTO optimization, because the stores to the pseudo header are being moved or elided across the code calculating the checksum. This series addresses all of these. We consolidate and clarify the packet sending helpers, and use them in some places there was previously duplicated code. In the process we use new checksum generation helpers which take a different approach which should avoid the LTO problems (this aspect I haven't tested yet though). Changes since v1: * Numerous minor style changes * Rename header generation helpers to make their behaviour clearer * Added several missing function doc comments * Corrected some erroneous statements and terms in comments David Gibson (14): Add csum_icmp6() helper for calculating ICMPv6 checksums Add csum_icmp4() helper for calculating ICMP checksums Add csum_udp6() helper for calculating UDP over IPv6 checksums Add csum_udp4() helper for calculating UDP over IPv4 checksums Add csum_ip4_header() helper to calculate IPv4 header checksums Add helpers for normal inbound packet destination addresses Remove support for TCP packets from tap_ip_send() tap: Remove unhelpeful vnet_pre optimization from tap_send() Split tap_ip_send() into IPv4 and IPv6 specific functions tap: Split tap_ip6_send() into UDP and ICMP variants ndp: Remove unneeded eh_source parameter ndp: Use tap_icmp6_send() helper tap: Split tap_ip4_send() into UDP and ICMP variants dhcp: Use tap_udp4_send() helper in dhcp() arp.c | 2 +- checksum.c | 120 ++++++++++++++++----- checksum.h | 15 ++- dhcp.c | 19 +--- dhcpv6.c | 21 +--- icmp.c | 12 +-- ndp.c | 28 +---- ndp.h | 3 +- tap.c | 312 ++++++++++++++++++++++++++++++++++------------------- tap.h | 19 +++- 10 files changed, 345 insertions(+), 206 deletions(-) -- 2.37.3

2 17

[PATCH v3 00/15] RFC: Unified flow table
by David Gibson 19 Jan '24

19 Jan '24

This is a third draft of the first steps in implementing more general "connection" tracking, as described at: https://pad.passt.top/p/NewForwardingModel This series changes the TCP connection table and hash table into a more general flow table that can track other protocols as well. Each flow uniformly keeps track of all the relevant addresses and ports, which will allow for more robust control of NAT and port forwarding. ICMP is converted to use the new flow table. Caveats: * We significantly increase the size of a connection/flow entry - Can probably be mitigated, but I haven't investigated much yet * We perform a number of extra getsockname() calls to know some of the socket endpoints - Haven't yet measured how much performance impact that has - Can be mitigated in at least some cases, but again, haven't tried yet * UDP is not converted yet Changes since v2: * Cosmetic fixes based on review * Extra doc comments for enum flow_type * Rename flowside to flowaddrs which turns out to make more sense in light of future changes * Fix bug where the socket flowaddrs for tap initiated connections wasn't initialised to match the socket address we were using in the case of map-gw NAT * New flowaddrs_from_sock() helper used in most cases which is cleaner and should avoid bugs like the above * Using newer centralised workarounds for clang-tidy issue 58992 * Remove duplicate definition of FLOW_MAX as maximum flow type and maximum number of tracked flows * Rebased on newer versions of preliminary work (ICMP, flow based dispatch and allocation, bind/address cleanups) * Unified hash table as well as base flow table * Integrated ICMP Changes since v1: * Terminology changes - "Endpoint" address/port instead of "correspondent" address/port - "flowside" instead of "demiflow" * Actually move the connection table to a new flow table structure in new files * Significant rearrangement of earlier patchs on top of that new table, to reduce churn David Gibson (15): flow: Common data structures for tracking flow addresses tcp, flow: Maintain guest side flow information tcp, flow: Maintain host side flow information tcp_splice,flow: Maintain flow information for spliced connections flow, tcp, tcp_splice: Uniform debug helpers for new flows tcp, flow: Replace TCP specific hash function with general flow hash flow: Add helper to determine a flow's protocol flow, tcp: Generalise TCP hash table to general flow hash table tcp: Re-use flow hash for initial sequence number generation icmp: Store ping socket information in the flow table icmp: Populate guest side information for ping flows icmp: Populate and use host side flow information icmp: Use 'flowside' epoll references for ping sockets icmp: Merge EPOLL_TYPE_ICMP and EPOLL_TYPE_ICMPV6 icmp: Eliminate icmp_id_map Makefile | 6 +- flow.c | 260 ++++++++++++++++++++++++++++++++++++++++++ flow.h | 104 +++++++++++++++++ flow_table.h | 2 + icmp.c | 211 +++++++++++++++++++--------------- icmp.h | 15 +-- icmp_flow.h | 31 +++++ passt.c | 15 +-- passt.h | 9 +- tap.c | 11 -- tap.h | 1 - tcp.c | 313 +++++++++++++++------------------------------------ tcp_conn.h | 9 -- tcp_splice.c | 63 ++++++++--- tcp_splice.h | 3 +- util.c | 4 +- util.h | 18 +++ 17 files changed, 683 insertions(+), 392 deletions(-) create mode 100644 icmp_flow.h -- 2.43.0

2 32

[PATCH 0/8] Small cleanups related to addresses and binding
by David Gibson 13 Jan '24

13 Jan '24

Here's another batch of cleanups for minor warts I noticed while working on flow table things. David Gibson (8): tcp: Fix address type for tcp_sock_init_af() treewide: Use IN4ADDR_LOOPBACK_INIT more widely treewide: Add IN4ADDR_ANY_INIT macro util: Use htonl_constant() in more places util: Improve sockaddr initialisation in sock_l4() icmp: Avoid unnecessary handling of unspecified bind address treewide: Avoid in_addr_t util: Make sock_l4() treat empty string ifname like NULL icmp.c | 27 ++++++--------------------- tcp.c | 4 ++-- tcp_splice.c | 2 +- udp.c | 14 ++++++-------- util.c | 12 ++++-------- util.h | 7 +++++-- 6 files changed, 24 insertions(+), 42 deletions(-) -- 2.43.0

2 16

[PATCH v2 00/12] RFC: ICMP reworks preliminary to flow table integration
by David Gibson 07 Jan '24

07 Jan '24

As with TCP, it turns out that there are a bunch of clean ups and reworks to the ICMP code which will make integration with the flow table easier, even before introducing a non-trivial version of the flow table itself. Based on the flow based dispatch/allocation, and bind/addressing cleanup series. Changes since v1: * Rebased on newer version of flow dispatch & allocation series * Added 12/12 splitting out close and new sequence functions David Gibson (12): checksum: Don't use linux/icmp.h when netinet/ip_icmp.h will do icmp: Don't set "port" on destination sockaddr for ping sockets icmp: Remove redundant initialisation of sendto() address icmp: Don't attempt to handle "wrong direction" ping socket traffic icmp: Don't attempt to match host IDs to guest IDs icmp: Use -1 to represent "missing" sockets icmp: Simplify socket expiry scanning icmp: Share more between IPv4 and IPv6 paths in icmp_tap_handler() icmp: Consolidate icmp_sock_handler() with icmpv6_sock_handler() icmp: Warn on receive errors from ping sockets icmp: Validate packets received on ping sockets icmp: Dedicated functions for starting and closing ping sequences checksum.c | 2 +- icmp.c | 326 ++++++++++++++++++++++++++--------------------------- icmp.h | 5 +- passt.c | 4 +- 4 files changed, 164 insertions(+), 173 deletions(-) -- 2.43.0

2 25

[PATCH v3 00/13] Manage more flow related things from generic flow code
by David Gibson 07 Jan '24

07 Jan '24

There are a number of things that are more-or-less general to flows which are still explicitly handled in tcp.c and tcp_splice.c including allocation and freeing of flow entries, and dispatch of deferred and timer functions. Even without adding more fields to the common flow structure, we can handle a number of these in a more flow-centric way. Unlike v1 this version is based on the hash table rework series. Changes since v2: * Realised the prealloc/commit functions where confusing and worked poorly for some future stuff. Replaced with alloc/alloc_cancel * Fixed a bug where newly allocated flow entries might not be 0-filled, because of the free tracking information in there. This could cause very subtle problems. Changes since v1: * Store the timestamp of last flow timers run in a global, rather than a ctx field * Rebased on the TCP hash table rework * Add patches 9..13/13 with changes to allocation and freeing of flow entries. David Gibson (13): flow: Make flow_table.h #include the protocol specific headers it needs treewide: Standardise on 'now' for current timestamp variables tcp, tcp_splice: Remove redundant handling from tcp_timer() tcp, tcp_splice: Move per-type cleanup logic into per-type helpers flow, tcp: Add flow-centric dispatch for deferred flow handling flow, tcp: Add handling for per-flow timers epoll: Better handling of number of epoll types tcp, tcp_splice: Avoid double layered dispatch for connected TCP sockets flow: Move flow_log_() to near top of flow.c flow: Move flow_count from context structure to a global flow: Abstract allocation of new flows with helper function flow: Enforce that freeing of closed flows must happen in deferred handlers flow: Avoid moving flow entries to compact table flow.c | 223 ++++++++++++++++++++++++++++++++++++++++++--------- flow.h | 5 +- flow_table.h | 20 +++++ icmp.c | 12 +-- icmp.h | 2 +- log.c | 34 ++++---- passt.c | 20 +++-- passt.h | 9 +-- tcp.c | 143 +++++++++------------------------ tcp.h | 2 +- tcp_conn.h | 8 +- tcp_splice.c | 49 +++++------ tcp_splice.h | 4 +- udp.c | 16 ++-- udp.h | 2 +- 15 files changed, 324 insertions(+), 225 deletions(-) -- 2.43.0

2 39

[PATCH] netlink: nl_addr_get() returns 0, not 9, on success
by Stefano Brivio 28 Dec '23

28 Dec '23

Fixes: 5103811e2df3 ("netlink: Propagate errors for "dump" operations") Signed-off-by: Stefano Brivio <sbrivio(a)redhat.com> --- netlink.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/netlink.c b/netlink.c index 379d46e..b221c79 100644 --- a/netlink.c +++ b/netlink.c @@ -535,7 +535,7 @@ int nl_route_dup(int s_src, unsigned int ifi_src, * @prefix_len: Mask or prefix length, to fill (for IPv4) * @addr_l: Link-scoped address to fill (for IPv6) * - * Return: 9 on success, negative error code on failure + * Return: 0 on success, negative error code on failure */ int nl_addr_get(int s, unsigned int ifi, sa_family_t af, void *addr, int *prefix_len, void *addr_l) -- 2.39.2

2 1

[PATCH v2] test: make passt.mbuto script more robust
by Jon Maloy 27 Dec '23

27 Dec '23

From: Jon Paul Maloy <jmaloy(a)redhat.com> Creation of a symbolic link from /sbin to /usr/sbin fails if /sbin exists and is non-empty. This is the case on Ubuntu-23.04. We fix this by removing /sbin before creating the link. Signed-off-by: Jon Maloy <jmaloy(a)redhat.com> --- v2: Move the contents of /sbin to /usr/sbin before creating the link. Signed-off-by: Jon Maloy <jmaloy(a)redhat.com> --- test/passt.mbuto | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/test/passt.mbuto b/test/passt.mbuto index 90816d2..75d1260 100755 --- a/test/passt.mbuto +++ b/test/passt.mbuto @@ -26,6 +26,9 @@ DIRS="${DIRS} /tmp /sbin /usr/share /var/log /var/lib /etc/ssh /run/sshd /root/. COPIES="${COPIES} small.bin,/root/small.bin medium.bin,/root/medium.bin big.bin,/root/big.bin" FIXUP="${FIXUP}"' + mv /sbin/* /usr/sbin || : + rm -rf /sbin + ln -s /usr/sbin /sbin cat > /sbin/dhclient-script << EOF #!/bin/sh LOG=/var/log/dhclient-script.log @@ -47,7 +50,6 @@ set >> \$LOG exit 0 EOF chmod 755 /sbin/dhclient-script - ln -s /sbin /usr/sbin ln -s /bin /usr/bin ln -s /run /var/run :> /etc/fstab -- 2.39.2

3 2

[PATCH] tcp: make tcp_sock_set_bufsize() static (again)
by Laurent Vivier 27 Dec '23

27 Dec '23

e5eefe77435a ("tcp: Refactor to use events instead of states, split out spliced implementation") has exported tcp_sock_set_bufsize() to be able to use it in tcp_splice.c, but 6ccab72d9b40 has removed its use in tcp_splice.c, so we can set it static again. Fixes: 6ccab72d9b40 ("tcp: Improve handling of fallback if socket pool is empty on new splice") Cc: david(a)gibson.dropbear.id.au Signed-off-by: Laurent Vivier <lvivier(a)redhat.com> --- tcp.c | 2 +- tcp.h | 1 - 2 files changed, 1 insertion(+), 2 deletions(-) diff --git a/tcp.c b/tcp.c index f506cfdd3bc7..1680b516b5b9 100644 --- a/tcp.c +++ b/tcp.c @@ -929,7 +929,7 @@ static void tcp_get_sndbuf(struct tcp_tap_conn *conn) * tcp_sock_set_bufsize() - Set SO_RCVBUF and SO_SNDBUF to maximum values * @s: Socket, can be -1 to avoid check in the caller */ -void tcp_sock_set_bufsize(const struct ctx *c, int s) +static void tcp_sock_set_bufsize(const struct ctx *c, int s) { int v = INT_MAX / 2; /* Kernel clamps and rounds, no need to check */ diff --git a/tcp.h b/tcp.h index 27b11668f258..87a6bf9f0ee8 100644 --- a/tcp.h +++ b/tcp.h @@ -23,7 +23,6 @@ int tcp_init(struct ctx *c); void tcp_timer(struct ctx *c, const struct timespec *ts); void tcp_defer_handler(struct ctx *c); -void tcp_sock_set_bufsize(const struct ctx *c, int s); void tcp_update_l2_buf(const unsigned char *eth_d, const unsigned char *eth_s); /** -- 2.42.0

3 2

[PATCH] checksum: Don't use linux/icmp.h when netinet/ip_icmp.h will do
by David Gibson 27 Dec '23

27 Dec '23

In most places where we need to get ICMP definitions, we get them from <netinet/ip_icmp.h>. However in checksum.c we instead include <linux/icmp.h>. Change it to use <netinet/ip_icmp.h> for consistency. Signed-off-by: David Gibson <david(a)gibson.dropbear.id.au> --- checksum.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/checksum.c b/checksum.c index 03b8a7c..f21c9b7 100644 --- a/checksum.c +++ b/checksum.c @@ -49,11 +49,11 @@ #include <arpa/inet.h> #include <netinet/ip.h> #include <netinet/tcp.h> +#include <netinet/ip_icmp.h> #include <stddef.h> #include <stdint.h> #include <linux/udp.h> -#include <linux/icmp.h> #include <linux/icmpv6.h> /* Checksums are optional for UDP over IPv4, so we usually just set -- 2.43.0

2 1