On Mon, 26 Oct 2026 16:48:20 +0530
Anshu Kumari
Fuzz testing with AFL++ persistent mode found that tcp_buf_data_from_sock() terminates the process with SIGFPE (signal 8) from division by zero at:
fill_bufs = DIV_ROUND_UP(wnd_scaled - already_sent, mss);
when MSS is small enough (less than four) to round down to 0 during the bit-shift in MSS_SET(). The termination itself is clean (not memory corruption or data leakage), but we can handle this condition more gracefully.
We considered resetting connections with a zero or very low MSS, but concluded this is not RFC-compliant: RFC 9293, section 3.1 (MUST-7), states: "TCP implementations MUST be prepared to handle an illegal option length (e.g., zero); a suggested procedure is to reset the connection and log the error cause." However, this applies only to option *lengths*, not *values* — no standard RFC defines a minimum MSS value. Section 3.5.2 further states: "A reset must not be sent if it is not clear that this is the case." Very low MSS values also have legitimate uses in microcontroller applications with limited buffers, and a zero MSS could represent a unidirectional connection.
Rounding a low MSS upward is also not an option: emitting segments larger than the peer advertised violates the effective send MSS requirement in RFC 9293, section 3.7.1.
Instead, preserve the actual MSS:
- Adjust MSS_SET() to clamp non-zero values below 4 to 1, avoiding the round-to-zero in bit-field storage. - Adjust MSS_GET() to return 1 when tap_mss is 1, so we never inflate the MSS beyond what the peer advertised. - When MSS is zero, don't send data: tcp_buf_data_from_sock() returns early. The peer will eventually determine the connection is unusable and reset it.
Signed-off-by: Anshu Kumari
--- v2: - added comment for both MSS_SET() and MSS_GET() macro. - fixed/modified MSS_GET(). - fixed commit message by explaining why we are not resetting the connection. NOTE: let the fuzzer run for more than a day with this fix but till now, haven't found any issue.
Applied. -- Stefano