Note that 2/5 is not actually needed for the purposes of these "test
cases" (which always succeed, at the moment), it just fixes a
condition I hit while writing them.
Stefano Brivio (5):
test/lib: Move screen-scraping setup and layout functions to _ugly
files
tap: Support for detection of existing sockets on ramfs
test/lib/perf_report: Use own flag to track initialisation
test/lib: Add "td" directive, handled by table_value()
test: Add memory/passt test cases
tap.c | 3 +-
test/Makefile | 5 +-
test/lib/layout | 69 ----------------
test/lib/layout_ugly | 122 ++++++++++++++++++++++++++++
test/lib/perf_report | 9 ++-
test/lib/setup | 24 +-----
test/lib/setup_ugly | 73 +++++++++++++++++
test/lib/term | 28 +++++++
test/lib/test | 3 +
test/memory/passt | 187 +++++++++++++++++++++++++++++++++++++++++++
test/run | 6 ++
11 files changed, 432 insertions(+), 97 deletions(-)
create mode 100644 test/lib/layout_ugly
create mode 100755 test/lib/setup_ugly
create mode 100644 test/memory/passt
--
2.35.1
I'm going to add yet another one of those, for which I have no quick
solution. It's a regression in some sense, but at least if we make
this regression more observable and defined, it should be easier to
find a comprehensive solution later, within this or another testing
framework.
Signed-off-by: Stefano Brivio <sbrivio(a)redhat.com>
---
test/lib/layout | 69 ------------------------------------
test/lib/layout_ugly | 83 ++++++++++++++++++++++++++++++++++++++++++++
test/lib/setup | 24 +------------
test/lib/setup_ugly | 38 ++++++++++++++++++++
test/run | 2 ++
5 files changed, 124 insertions(+), 92 deletions(-)
create mode 100644 test/lib/layout_ugly
create mode 100755 test/lib/setup_ugly
diff --git a/test/lib/layout b/test/lib/layout
index fcd1db4..b190060 100644
--- a/test/lib/layout
+++ b/test/lib/layout
@@ -13,75 +13,6 @@
# Copyright (c) 2021 Red Hat GmbH
# Author: Stefano Brivio <sbrivio(a)redhat.com>
-# layout_host() - Simple host commands layout with info and host panes
-layout_host() {
- sleep 3
-
- tmux kill-pane -a -t 0
- cmd_write 0 clear
-
- tmux split-window -h -l '35%' -t passt_test:1.0
-
- PANE_HOST=0
- PANE_INFO=1
-
- get_info_cols
-
- tmux send-keys -l -t ${PANE_INFO} 'while cat
'"$STATEBASE/log_pipe"'; do :; done'
- tmux send-keys -t ${PANE_INFO} -N 100 C-m
- tmux select-pane -t ${PANE_INFO} -T "test log"
-
- if context_exists host; then
- pane_watch_contexts 0 host host
- else
- tmux pipe-pane -O -t ${PANE_HOST} "cat >> ${LOGDIR}/pane_host.log"
- tmux select-pane -t ${PANE_HOST} -T "host"
- fi
-
- info_layout "host commands only"
-
- sleep 1
-}
-
-# layout_pasta_simple() - Panes for host and pasta
-layout_pasta_simple() {
- sleep 3
-
- tmux kill-pane -a -t 0
- cmd_write 0 clear
-
- tmux split-window -v -t passt_test
- tmux split-window -h -t passt_test
-
- PANE_PASST=0
- PANE_HOST=1
- PANE_INFO=2
-
- get_info_cols
-
- tmux send-keys -l -t ${PANE_INFO} 'while cat
'"$STATEBASE/log_pipe"'; do :; done'
- tmux send-keys -t ${PANE_INFO} -N 100 C-m
- tmux select-pane -t ${PANE_INFO} -T "test log"
-
- if context_exists host; then
- pane_watch_contexts ${PANE_HOST} host host
- else
- tmux pipe-pane -O -t ${PANE_HOST} "cat >> ${LOGDIR}/pane_host.log"
- tmux select-pane -t ${PANE_HOST} -T "host"
- fi
-
- if context_exists passt; then
- pane_watch_contexts ${PANE_PASST} host host
- else
- tmux pipe-pane -O -t ${PANE_PASST} "cat >> ${LOGDIR}/pane_passt.log"
- tmux select-pane -t ${PANE_PASST} -T "pasta"
- fi
-
- info_layout "single pasta instance"
-
- sleep 1
-}
-
# layout_pasta() - Panes for host, pasta, and separate one for namespace
layout_pasta() {
sleep 3
diff --git a/test/lib/layout_ugly b/test/lib/layout_ugly
new file mode 100644
index 0000000..9397b7d
--- /dev/null
+++ b/test/lib/layout_ugly
@@ -0,0 +1,83 @@
+#!/bin/sh
+#
+# SPDX-License-Identifier: AGPL-3.0-or-later
+#
+# PASST - Plug A Simple Socket Transport
+# for qemu/UNIX domain socket mode
+#
+# PASTA - Pack A Subtle Tap Abstraction
+# for network namespace/tap device mode
+#
+# test/lib/layout_ugly - screen-scraped tmux pane layouts
+#
+# Copyright (c) 2022 Red Hat GmbH
+# Author: Stefano Brivio <sbrivio(a)redhat.com>
+
+# layout_host() - Simple host commands layout with info and host panes
+layout_host() {
+ sleep 3
+
+ tmux kill-pane -a -t 0
+ cmd_write 0 clear
+
+ tmux split-window -h -l '35%' -t passt_test:1.0
+
+ PANE_HOST=0
+ PANE_INFO=1
+
+ get_info_cols
+
+ tmux send-keys -l -t ${PANE_INFO} 'while cat
'"$STATEBASE/log_pipe"'; do :; done'
+ tmux send-keys -t ${PANE_INFO} -N 100 C-m
+ tmux select-pane -t ${PANE_INFO} -T "test log"
+
+ if context_exists host; then
+ pane_watch_contexts 0 host host
+ else
+ tmux pipe-pane -O -t ${PANE_HOST} "cat >> ${LOGDIR}/pane_host.log"
+ tmux select-pane -t ${PANE_HOST} -T "host"
+ fi
+
+ info_layout "host commands only"
+
+ sleep 1
+}
+
+# layout_pasta_simple() - Panes for host and pasta
+layout_pasta_simple() {
+ sleep 3
+
+ tmux kill-pane -a -t 0
+ cmd_write 0 clear
+
+ tmux split-window -v -t passt_test
+ tmux split-window -h -t passt_test
+
+ PANE_PASST=0
+ PANE_HOST=1
+ PANE_INFO=2
+
+ get_info_cols
+
+ tmux send-keys -l -t ${PANE_INFO} 'while cat
'"$STATEBASE/log_pipe"'; do :; done'
+ tmux send-keys -t ${PANE_INFO} -N 100 C-m
+ tmux select-pane -t ${PANE_INFO} -T "test log"
+
+ if context_exists host; then
+ pane_watch_contexts ${PANE_HOST} host host
+ else
+ tmux pipe-pane -O -t ${PANE_HOST} "cat >> ${LOGDIR}/pane_host.log"
+ tmux select-pane -t ${PANE_HOST} -T "host"
+ fi
+
+ if context_exists passt; then
+ pane_watch_contexts ${PANE_PASST} host host
+ else
+ tmux pipe-pane -O -t ${PANE_PASST} "cat >> ${LOGDIR}/pane_passt.log"
+ tmux select-pane -t ${PANE_PASST} -T "pasta"
+ fi
+
+ info_layout "single pasta instance"
+
+ sleep 1
+}
diff --git a/test/lib/setup b/test/lib/setup
index e2d0ff0..a5b277b 100755
--- a/test/lib/setup
+++ b/test/lib/setup
@@ -14,6 +14,7 @@
# Author: Stefano Brivio <sbrivio(a)redhat.com>
INITRAMFS="${BASEPATH}/mbuto.img"
+INITRAMFS_MEM="${BASEPATH}/mbuto.mem.img"
VCPUS="$( [ $(nproc) -ge 8 ] && echo 6 || echo $(( $(nproc) / 2 + 1 ))
)"
__mem_kib="$(sed -n 's/MemTotal:[ ]*\([0-9]*\) kB/\1/p'
/proc/meminfo)"
VMEM="$((${__mem_kib} / 1024 / 4))"
@@ -26,11 +27,6 @@ setup_build() {
layout_host
}
-# setup_distro() - Set up pane layout for distro tests
-setup_distro() {
- layout_host
-}
-
# setup_passt() - Start qemu and passt
setup_passt() {
context_setup_host host
@@ -106,13 +102,6 @@ setup_pasta() {
wait_for [ -f "${STATESETUP}/passt.pid" ]
}
-# setup_pasta_options() - Set up layout and host context without starting pasta
-setup_pasta_options() {
- context_setup_host host
-
- layout_pasta_simple
-}
-
# setup_passt_in_ns() - Set up namespace (with pasta), run qemu and passt into it
setup_passt_in_ns() {
context_setup_host host
@@ -285,11 +274,6 @@ teardown_build() {
teardown_context_watch ${PANE_HOST} host
}
-# teardown_distro() - Nothing to do, yet
-teardown_distro() {
- :
-}
-
# teardown_passt() - Kill qemu, remove passt PID file
teardown_passt() {
kill $(cat "${STATESETUP}/qemu.pid")
@@ -311,12 +295,6 @@ teardown_pasta() {
teardown_context_watch ${PANE_NS} unshare ns
}
-# teardown_pasta_options() - Tear down pasta and host context, no namespace
-teardown_pasta_options() {
- teardown_context_watch ${PANE_HOST} host
- teardown_context_watch ${PANE_PASST} passt
-}
-
# teardown_passt_in_ns() - Exit namespace, kill qemu and pasta, remove pid file
teardown_passt_in_ns() {
context_run ns kill $(cat "${STATESETUP}/qemu.pid")
diff --git a/test/lib/setup_ugly b/test/lib/setup_ugly
new file mode 100755
index 0000000..764177e
--- /dev/null
+++ b/test/lib/setup_ugly
@@ -0,0 +1,38 @@
+#!/bin/sh
+#
+# SPDX-License-Identifier: AGPL-3.0-or-later
+#
+# PASST - Plug A Simple Socket Transport
+# for qemu/UNIX domain socket mode
+#
+# PASTA - Pack A Subtle Tap Abstraction
+# for network namespace/tap device mode
+#
+# test/lib/setup_ugly - Setup functions using screen-scraping instead of context
+#
+# Copyright (c) 2022 Red Hat GmbH
+# Author: Stefano Brivio <sbrivio(a)redhat.com>
+
+# setup_distro() - Set up pane layout for distro tests
+setup_distro() {
+ layout_host
+}
+
+# setup_pasta_options() - Set up layout and host context without starting pasta
+setup_pasta_options() {
+ context_setup_host host
+
+ layout_pasta_simple
+}
+
+# teardown_distro() - Nothing to do, yet
+teardown_distro() {
+ :
+}
+
+# teardown_pasta_options() - Tear down pasta and host context, no namespace
+teardown_pasta_options() {
+ teardown_context_watch ${PANE_HOST} host
+ teardown_context_watch ${PANE_PASST} passt
+}
+
diff --git a/test/run b/test/run
index cb3b6c0..c3486b9 100755
--- a/test/run
+++ b/test/run
@@ -39,10 +39,12 @@ COMMIT="$(git log --oneline --no-decorate -1)"
. lib/util
. lib/setup
+. lib/setup_ugly
. lib/context
. lib/term
. lib/perf_report
. lib/layout
+. lib/layout_ugly
. lib/test
. lib/video
--
2.35.1
On ramfs, connecting to a non-existent UNIX domain socket yields
EACCESS, instead of ENOENT. This is visible if we use passt directly
on rootfs (a ramfs instance) from an initramfs image.
It's probably wrong for ramfs to return EACCES, but given the
simplicity of the filesystem, I doubt we should try to fix it there
at the possible cost of added complexity.
Also, this whole beauty should go away once qrap-less usage is
established, so just accept EACCES as indication that a conflicting
socket does not, in fact, exist.
Signed-off-by: Stefano Brivio <sbrivio(a)redhat.com>
---
tap.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/tap.c b/tap.c
index 4dcff4f..0a3ccce 100644
--- a/tap.c
+++ b/tap.c
@@ -912,7 +912,8 @@ static void tap_sock_unix_init(struct ctx *c)
}
ret = connect(ex, (const struct sockaddr *)&addr, sizeof(addr));
- if (!ret || (errno != ENOENT && errno != ECONNREFUSED)) {
+ if (!ret || (errno != ENOENT && errno != ECONNREFUSED &&
+ errno != EACCES)) {
if (*c->sock_path) {
err("Socket path %s already in use", path);
exit(EXIT_FAILURE);
--
2.35.1
Instead of just disabling performance reports if running in demo
mode. This allows us to use table functions outside of performance
reports.
Signed-off-by: Stefano Brivio <sbrivio(a)redhat.com>
---
test/lib/perf_report | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/test/lib/perf_report b/test/lib/perf_report
index ed71ef9..4ffb14b 100755
--- a/test/lib/perf_report
+++ b/test/lib/perf_report
@@ -13,6 +13,7 @@
# Copyright (c) 2021 Red Hat GmbH
# Author: Stefano Brivio <sbrivio(a)redhat.com>
+PERF_INIT=0
PERF_LINK_COUNT=0
PERF_JS="${LOGDIR}/web/perf.js"
@@ -129,6 +130,7 @@ perf_init() {
mkdir -p "$(dirname "${PERF_JS}")"
echo "${PERF_TEMPLATE_HTML}" > "${PERF_JS}"
perf_report_sub commit "$(echo ${COMMIT} | sed
"s/'/\\\'/g")"
+ PERF_INIT=1
}
# perf_fill_lines() - Fill multiple "LINE" directives in template, matching
rows
@@ -178,6 +180,7 @@ perf_fill_lines() {
# perf_finish() - Add trailing backslashes and process ending templates
perf_finish() {
+ PERF_INIT=0
perf_fill_lines
sed -i 's/^.*$/&\\/g' "${PERF_JS}"
echo "${PERF_TEMPLATE_JS}" >> "${PERF_JS}"
@@ -215,7 +218,7 @@ perf_report() {
# perf_th() - Table header for a set of tests
perf_th() {
- [ ${DEMO} -eq 1 ] && return
+ [ ${PERF_INIT} -eq 0 ] && return
shift
@@ -231,7 +234,7 @@ perf_th() {
# perf_tr() - Main table row
perf_tr() {
- [ ${DEMO} -eq 1 ] && return
+ [ ${PERF_INIT} -eq 0 ] && return
__line_no=0
shift
@@ -244,7 +247,7 @@ perf_tr() {
# perf_td() - Single cell with test result
perf_td() {
- [ ${DEMO} -eq 1 ] && return
+ [ ${PERF_INIT} -eq 0 ] && return
__rewind="${1}"
shift
--
2.35.1
This can be used for generic cell values with an arbitrary scale.
Signed-off-by: Stefano Brivio <sbrivio(a)redhat.com>
---
test/lib/term | 28 ++++++++++++++++++++++++++++
test/lib/test | 3 +++
2 files changed, 31 insertions(+)
diff --git a/test/lib/term b/test/lib/term
index 1b42df8..8515c50 100755
--- a/test/lib/term
+++ b/test/lib/term
@@ -552,6 +552,34 @@ table_end() {
info_n "\n${__buf}'\n"
}
+# table_value() - Print generic table value in its own cell
+# $1: Value, can be '-' to indicate a filler
+# $2: Scale, exponent of 10
+# $3: Error value, scaled: if value is less than this, print in red
+# $4: Warning value, scaled: if value is less than this, print in yellow
+table_value() {
+ [ "${1}" = "-" ] && table_cell 1 "-" &&
perf_td 0 "" && return 0
+ if [ "${2}" != "0" ]; then
+ __v="$(echo "scale=1; x=( ${1} + 10^$((${2} - 1)) / 2 ) / 10^${2}; if ( x
< 1 && x > 0 ) print 0; x" | bc -l)"
+ else
+ __v="${1}"
+ fi
+ perf_td 0 "${__v}"
+
+ __red="${3}"
+ __yellow="${4}"
+ if [ "$(echo "${__v} < ${__red}" | bc -l)" = "1" ];
then
+ table_cell ${#__v} "${PR_RED}${__v}${PR_NC}"
+ return 1
+ elif [ "$(echo "${__v} < ${__yellow}" | bc -l)" = "1"
]; then
+ table_cell ${#__v} "${PR_YELLOW}${__v}${PR_NC}"
+ return 1
+ else
+ table_cell ${#__v} "${PR_GREEN}${__v}${PR_NC}"
+ return 0
+ fi
+}
+
table_value_throughput() {
[ "${1}" = "-" ] && table_cell 1 "-" &&
perf_td 0 "" && return 0
__v="$(echo "scale=1; x=( ${1} + 10^8 / 2 ) / 10^9; if ( x < 1 && x
> 0 ) print 0; x" | bc -l)"
diff --git a/test/lib/test b/test/lib/test
index 4c271a5..df32178 100755
--- a/test/lib/test
+++ b/test/lib/test
@@ -278,6 +278,9 @@ test_one_line() {
"te")
table_end
;;
+ "td")
+ table_value ${__arg} || TEST_ONE_perf_nok=1
+ ;;
"bw")
table_value_throughput ${__arg} || TEST_ONE_perf_nok=1
;;
--
2.35.1
These show a summary of memory usage in kernel and userspace with
different port forwarding configurations, details of userspace usage
using 'nm' (passt only uses statically allocated memory), and details
of kernel memory from slab reporting facilities.
passt can't pivot_root() for sandboxing purposes on ramfs, so we need
to create another filesystem and chroot into it, first.
We don't want to use pane context functions, as we're checking memory
usage for sockets: resort to screen-scraping.
Signed-off-by: Stefano Brivio <sbrivio(a)redhat.com>
---
test/Makefile | 5 +-
test/lib/layout_ugly | 39 +++++++++
test/lib/setup_ugly | 35 ++++++++
test/memory/passt | 187 +++++++++++++++++++++++++++++++++++++++++++
test/run | 4 +
5 files changed, 269 insertions(+), 1 deletion(-)
create mode 100644 test/memory/passt
diff --git a/test/Makefile b/test/Makefile
index 91498ff..9f2bc42 100644
--- a/test/Makefile
+++ b/test/Makefile
@@ -55,7 +55,7 @@ UBUNTU_IMGS = $(UBUNTU_OLD_IMGS) $(UBUNTU_NEW_IMGS)
DOWNLOAD_ASSETS = mbuto \
$(DEBIAN_IMGS) $(FEDORA_IMGS) $(OPENSUSE_IMGS) $(UBUNTU_IMGS)
TESTDATA_ASSETS = small.bin big.bin medium.bin
-LOCAL_ASSETS = mbuto.img QEMU_EFI.fd \
+LOCAL_ASSETS = mbuto.img mbuto.mem.img QEMU_EFI.fd \
$(DEBIAN_IMGS:%=prepared-%) $(FEDORA_IMGS:%=prepared-%) \
$(UBUNTU_NEW_IMGS:%=prepared-%) \
nsholder guest-key guest-key.pub \
@@ -76,6 +76,9 @@ guest-key guest-key.pub:
mbuto.img: passt.mbuto mbuto guest-key.pub $(TESTDATA_ASSETS)
./mbuto/mbuto -p ./$< -c lz4 -f $@
+mbuto.mem.img: passt.mem.mbuto mbuto ../passt.avx2
+ ./mbuto/mbuto -p ./$< -c lz4 -f $@
+
nsholder: nsholder.c
$(CC) $(CFLAGS) -o $@ $^
diff --git a/test/lib/layout_ugly b/test/lib/layout_ugly
index 9397b7d..d62d337 100644
--- a/test/lib/layout_ugly
+++ b/test/lib/layout_ugly
@@ -81,3 +81,42 @@ layout_pasta_simple() {
sleep 1
}
+
+# layout_memory() - Screen-scraped panes for memory usage tests, big guest pane
+layout_memory() {
+ sleep 3
+
+ tmux kill-pane -a -t 0
+ cmd_write 0 clear
+
+ tmux split-window -h -l '35%' -t passt_test
+ tmux split-window -v -l '15%' -t passt_test
+
+ PANE_PASST=2
+ PANE_GUEST=0
+ PANE_INFO=1
+
+ get_info_cols
+
+ tmux send-keys -l -t ${PANE_INFO} 'while cat
'"$STATEBASE/log_pipe"'; do :; done'
+ tmux send-keys -t ${PANE_INFO} -N 100 C-m
+ tmux select-pane -t ${PANE_INFO} -T "test log"
+
+ if context_exists guest; then
+ pane_watch_contexts ${PANE_GUEST} guest guest
+ else
+ tmux pipe-pane -O -t ${PANE_GUEST} "cat >> ${LOGDIR}/pane_guest.log"
+ tmux select-pane -t ${PANE_GUEST} -T "guest"
+ fi
+
+ if context_exists passt; then
+ pane_watch_contexts ${PANE_PASST} passt passt
+ else
+ tmux pipe-pane -O -t ${PANE_PASST} "cat >> ${LOGDIR}/pane_passt.log"
+ tmux select-pane -t ${PANE_PASST} -T "passt"
+ fi
+
+ info_layout "memory usage"
+
+ sleep 1
+}
diff --git a/test/lib/setup_ugly b/test/lib/setup_ugly
index 764177e..c62ea9b 100755
--- a/test/lib/setup_ugly
+++ b/test/lib/setup_ugly
@@ -25,6 +25,30 @@ setup_pasta_options() {
layout_pasta_simple
}
+# setup_memory() - Start qemu in guest pane, and passt in passt context
+setup_memory() {
+ context_setup_host passt
+
+ layout_memory
+
+ context_run passt "./passt -P ${STATESETUP}/passt.pid"
+
+ # pidfile isn't created until passt is listening
+ wait_for [ -f "${STATESETUP}/passt.pid" ]
+
+ pane_or_context_run guest './qrap 5 qemu-system-$(uname -m)' \
+ ' -machine accel=kvm' \
+ ' -m '${VMEM}' -cpu host -smp '${VCPUS} \
+ ' -kernel ' "/boot/vmlinuz-$(uname -r)" \
+ ' -initrd '${INITRAMFS_MEM}' -nographic -serial stdio' \
+ ' -nodefaults' \
+ ' -append "console=ttyS0 mitigations=off apparmor=0 ' \
+ 'virtio-net.napi_tx=1"' \
+ " -device virtio-net-pci,netdev=hostnet0,x-txburst=16384" \
+ " -netdev socket,fd=5,id=hostnet0" \
+ " -pidfile ${STATESETUP}/qemu.pid"
+}
+
# teardown_distro() - Nothing to do, yet
teardown_distro() {
:
@@ -36,3 +60,14 @@ teardown_pasta_options() {
teardown_context_watch ${PANE_PASST} passt
}
+# teardown_passt() - Kill qemu with ^C, remove passt PID file
+teardown_memory() {
+ kill $(cat "${STATESETUP}/qemu.pid")
+
+ rm "${STATESETUP}/passt.pid"
+
+ tmux send-keys -t ${PANE_PASST} "C-c"
+
+ teardown_context_watch ${PANE_PASST} passt
+ teardown_context_watch ${PANE_GUEST} qemu
+}
diff --git a/test/memory/passt b/test/memory/passt
new file mode 100644
index 0000000..fa89821
--- /dev/null
+++ b/test/memory/passt
@@ -0,0 +1,187 @@
+# SPDX-License-Identifier: AGPL-3.0-or-later
+#
+# PASST - Plug A Simple Socket Transport
+# for qemu/UNIX domain socket mode
+#
+# PASTA - Pack A Subtle Tap Abstraction
+# for network namespace/tap device mode
+#
+# test/memory/passt - Show memory usage of passt in kernel and userspace
+#
+# Copyright (c) 2022 Red Hat GmbH
+# Author: Stefano Brivio <sbrivio(a)redhat.com>
+
+gtools sed cat diff nm sort kill tee head tail chroot unshare mount mkdir cp
+
+def meminfo_row
+gout DIFF meminfo_diff /tmp/meminfo.before /tmp/meminfo.after __WHAT__
+tl __NAME__
+td __DIFF__ 3 0 0
+endef
+
+def meminfo_reverse_row
+gout DIFF meminfo_diff /tmp/meminfo.after /tmp/meminfo.before __WHAT__
+tl __NAME__
+td __DIFF__ 3 0 0
+endef
+
+def nm_row
+gout SIZE nm_size /tmp/nm.size __WHAT__
+tl __WHAT__
+td __SIZE__ 6 0 0
+endef
+
+def slab_row
+gout COUNT slab_diff_count /tmp/slabinfo.before /tmp/slabinfo.after __WHAT__
+gout SIZE slab_size /tmp/slabinfo.before __WHAT__
+gout DIFF slab_diff_size /tmp/slabinfo.before /tmp/slabinfo.after __WHAT__
+tl __WHAT__
+td __COUNT__ 0 0 0
+td __SIZE__ 0 0 0
+td __DIFF__ 6 0 0
+endef
+
+def start_stop_diff
+guest sed /proc/slabinfo -ne 's/^\([^ ]* *[^ ]* *[^ ]* *[^ ]*\).*/\\\1/p' >
/tmp/slabinfo.before
+guest cat /proc/meminfo > /tmp/meminfo.before
+guest /usr/bin/passt.avx2 -l /tmp/log -s /tmp/sock -P /tmp/pid __OPTS__ --netns-only
+sleep 2
+guest cat /proc/meminfo > /tmp/meminfo.after
+guest sed /proc/slabinfo -ne 's/^\([^ ]* *[^ ]* *[^ ]* *[^ ]*\).*/\\\1/p' >
/tmp/slabinfo.after
+guest kill \$(cat /tmp/pid)
+guest diff -y --suppress-common-lines /tmp/meminfo.before /tmp/meminfo.after || :
+guest nm -td -Sr --size-sort -P /usr/bin/passt.avx2 | head -30 | tee /tmp/nm.size
+guest sed /proc/slabinfo -ne 's/\(.*<objsize>\).*$/\1/p' | tail -1; (diff
-y --suppress-common-lines /tmp/slabinfo.before /tmp/slabinfo.after | sort -grk8)
+endef
+
+def summary
+info Memory usage summary
+info
+th type MiB
+set WHAT MemFree
+set NAME used
+meminfo_reverse_row
+set WHAT AnonPages
+set NAME userspace
+meminfo_row
+set WHAT Slab
+set NAME kernel
+meminfo_row
+te
+endef
+
+
+guest mkdir /test
+guest mount -t tmpfs none /test
+guest mkdir /test/proc /test/dev /test/tmp
+guest mount -o bind /proc /test/proc
+guest mount -o bind /dev /test/dev
+guest cp -Lr /bin /lib /lib64 /usr /sbin /test/
+
+guest ulimit -Hn 300000
+guest unshare -rUm -R /test
+guest chroot .
+
+guest meminfo_size() { grep "^$2:" $1 | tr -s ' ' | cut -f2 -d '
'; }
+guest meminfo_diff() { echo $(( $(meminfo_size $2 $3) - $(meminfo_size $1 $3) )); }
+
+guest nm_size() { grep -m1 "^$2 " $1 | cut -f4 -d ' '; }
+
+guest slab_count() { grep "^$2 " $1 | tr -s ' ' | cut -f3 -d '
'; }
+guest slab_size() { grep "^$2 " $1 | tr -s ' ' | cut -f4 -d '
'; }
+guest slab_diff_count() { echo $(( $(slab_count $2 $3) - $(slab_count $1 $3) )); }
+guest slab_diff_size() { echo $(( $(slab_count $2 $3) * $(slab_size $2 $3) - $(slab_count
$1 $3) * $(slab_size $1 $3) )); }
+
+
+test Memory usage: all TCP and UDP ports forwarded, IPv4 and IPv6
+set OPTS -t all -u all
+start_stop_diff
+summary
+
+info Userspace memory detail
+info
+th symbol MiB
+set WHAT tcp_buf_discard
+nm_row
+set WHAT tcp6_l2_buf
+nm_row
+set WHAT tcp4_l2_buf
+nm_row
+set WHAT tc
+nm_row
+set WHAT pkt_buf
+nm_row
+set WHAT udp_splice_map
+nm_row
+set WHAT udp6_l2_buf
+nm_row
+set WHAT udp4_l2_buf
+nm_row
+set WHAT udp_tap_map
+nm_row
+set WHAT icmp_id_map
+nm_row
+set WHAT udp_splice_buf
+nm_row
+set WHAT tc_hash
+nm_row
+set WHAT pool_tap6_storage
+nm_row
+set WHAT pool_tap4_storage
+nm_row
+set WHAT tap6_l4
+nm_row
+set WHAT tap4_l4
+nm_row
+te
+
+info Kernel memory detail
+info
+th objects count size MiB
+set WHAT pid
+slab_row
+set WHAT dentry
+slab_row
+set WHAT Acpi-Parse
+slab_row
+set WHAT kmalloc-64
+slab_row
+set WHAT kmalloc-32
+slab_row
+set WHAT lsm_file_cache
+slab_row
+set WHAT filp
+slab_row
+set WHAT anon_vma_chain
+slab_row
+set WHAT ep_head
+slab_row
+set WHAT sock_inode_cache
+slab_row
+set WHAT signal_cache
+slab_row
+set WHAT TCPv6
+slab_row
+set WHAT TCP
+slab_row
+set WHAT UDPv6
+slab_row
+te
+
+
+test Memory usage: all TCP ports forwarded, IPv4
+set OPTS -t all -4
+start_stop_diff
+summary
+
+
+test Memory usage: all TCP and UDP ports forwarded, IPv4
+set OPTS -t all -u all -4
+start_stop_diff
+summary
+
+
+test Memory usage: no ports forwarded
+set OPTS -t none -u none
+start_stop_diff
+summary
diff --git a/test/run b/test/run
index c3486b9..e07513f 100755
--- a/test/run
+++ b/test/run
@@ -79,6 +79,10 @@ run() {
test pasta_options/log_to_file
teardown pasta_options
+ setup memory
+ test memory/passt
+ teardown memory
+
setup passt
test passt/ndp
test passt/dhcp
--
2.35.1
On Mon, 31 Oct 2022 10:58:58 +0100 Stefano Brivio <sbrivio(a)redhat.com> wrote:These show a summary of memory usage in kernel and userspace with different port forwarding configurations, details of userspace usage using 'nm' (passt only uses statically allocated memory), and details of kernel memory from slab reporting facilities.Sorry, I forgot to post passt.mem.mbuto here! I'll re-spin in a moment. -- Stefano