Reconstruct incoming ICMP headers for failed UDP connect and forward back
to local peer.
v2: - Added patch breaking out udp header creation from function
tap_udp4_send().
- Updated the ICMP creation by using the new function.
- Added logics to find correct flow, depending on origin.
- All done after feedback from David Gibson.
v3: - More changes after feedback from David Gibson.
v4: - Even more changes after feedback from D. Gibson
v5: - Added corresponding patches for IPv6
v6: - Fixed some small nits after comments from D. Gibson.
Jon Maloy (4):
tap: break out building of udp header from tap_udp4_send function
udp: create and send ICMPv4 to local peer when applicable
tap: break out building of udp header from tap_udp6_send function
udp: create and send ICMPv6 to local peer when applicable
tap.c | 86 +++++++++++++++++++++++++----------
tap.h | 15 ++++++
udp.c | 121 ++++++++++++++++++++++++++++++++++++++++++++-----
udp_internal.h | 2 +-
udp_vu.c | 4 +-
5 files changed, 189 insertions(+), 39 deletions(-)
--
2.48.1
We will need to build the UDP header at other locations than in function
tap_udp4_send(), so we break that part out to a separate function.
Reviewed-by: David Gibson <david(a)gibson.dropbear.id.au>
Signed-off-by: Jon Maloy <jmaloy(a)redhat.com>
---
tap.c | 34 ++++++++++++++++++++++++++--------
tap.h | 5 +++++
2 files changed, 31 insertions(+), 8 deletions(-)
diff --git a/tap.c b/tap.c
index 44b0fc0..9c91872 100644
--- a/tap.c
+++ b/tap.c
@@ -163,24 +163,20 @@ static void *tap_push_ip4h(struct iphdr *ip4h, struct in_addr src,
}
/**
- * tap_udp4_send() - Send UDP over IPv4 packet
+ * tap_push_uh4() - Build UDPv4 header with checksum
* @c: Execution context
* @src: IPv4 source address
* @sport: UDP source port
* @dst: IPv4 destination address
* @dport: UDP destination port
- * @in: UDP payload contents (not including UDP header)
+ * @in: UDP payload contents (not including UDP header)
* @dlen: UDP payload length (not including UDP header)
*/
-void tap_udp4_send(const struct ctx *c, struct in_addr src, in_port_t sport,
+void *tap_push_uh4(struct udphdr *uh, struct in_addr src, in_port_t sport,
struct in_addr dst, in_port_t dport,
const void *in, size_t dlen)
{
size_t l4len = dlen + sizeof(struct udphdr);
- char buf[USHRT_MAX];
- struct iphdr *ip4h = tap_push_l2h(c, buf, ETH_P_IP);
- struct udphdr *uh = tap_push_ip4h(ip4h, src, dst, l4len, IPPROTO_UDP);
- char *data = (char *)(uh + 1);
const struct iovec iov = {
.iov_base = (void *)in,
.iov_len = dlen
@@ -191,8 +187,30 @@ void tap_udp4_send(const struct ctx *c, struct in_addr src, in_port_t
sport,
uh->dest = htons(dport);
uh->len = htons(l4len);
csum_udp4(uh, src, dst, &payload);
- memcpy(data, in, dlen);
+ return uh + 1;
+}
+
+/**
+ * tap_udp4_send() - Send UDP over IPv4 packet
+ * @c: Execution context
+ * @src: IPv4 source address
+ * @sport: UDP source port
+ * @dst: IPv4 destination address
+ * @dport: UDP destination port
+ * @in: UDP payload contents (not including UDP header)
+ * @dlen: UDP payload length (not including UDP header)
+ */
+void tap_udp4_send(const struct ctx *c, struct in_addr src, in_port_t sport,
+ struct in_addr dst, in_port_t dport,
+ const void *in, size_t dlen)
+{
+ size_t l4len = dlen + sizeof(struct udphdr);
+ char buf[USHRT_MAX];
+ struct iphdr *ip4h = tap_push_l2h(c, buf, ETH_P_IP);
+ struct udphdr *uh = tap_push_ip4h(ip4h, src, dst, l4len, IPPROTO_UDP);
+ char *data = tap_push_uh4(uh, src, sport, dst, dport, in, dlen);
+ memcpy(data, in, dlen);
tap_send_single(c, buf, dlen + (data - buf));
}
diff --git a/tap.h b/tap.h
index a476a12..0b3eb93 100644
--- a/tap.h
+++ b/tap.h
@@ -6,6 +6,8 @@
#ifndef TAP_H
#define TAP_H
+struct udphdr;
+
/**
* struct tap_hdr - tap backend specific headers
* @vnet_len: Frame length (for qemu socket transport)
@@ -42,6 +44,9 @@ static inline void tap_hdr_update(struct tap_hdr *thdr, size_t l2len)
thdr->vnet_len = htonl(l2len);
}
+void *tap_push_uh4(struct udphdr *uh, struct in_addr src, in_port_t sport,
+ struct in_addr dst, in_port_t dport,
+ const void *in, size_t dlen);
void tap_udp4_send(const struct ctx *c, struct in_addr src, in_port_t sport,
struct in_addr dst, in_port_t dport,
const void *in, size_t dlen);
--
2.48.1
When a local peer sends a UDP message to a non-existing port on an
existing remote host, that host will return an ICMP message containing
the error code ICMP_PORT_UNREACH, plus the header and the first eight
bytes of the original message. If the sender socket has been connected,
it uses this message to issue a "Connection Refused" event to the user.
Until now, we have only read such events from the externally facing
socket, but we don't forward them back to the local sender because
we cannot read the ICMP message directly to user space. Because of
this, the local peer will hang and wait for a response that never
arrives.
We now fix this for IPv4 by recreating and forwarding a correct ICMP
message back to the internal sender. We synthesize the message based
on the information in the extended error structure, plus the returned
part of the original message body.
Note that for the sake of completeness, we even produce ICMP messages
for other error codes. We have noticed that at least ICMP_PROT_UNREACH
is propagated as an error event back to the user.
Reviewed-by: David Gibson <david(a)gibson.dropbear.id.au>
Signed-off-by: Jon Maloy <jmaloy(a)redhat.com>
---
v2: - Updated the ICMP creation to use the new function tap_push_uh4().
- Added logics to find correct flow, depending on origin.
- All done after feedback from David Gibson.
v3: - Passing parameter 'now' along with call to udp_sock_errs() call.
- Corrected lookup of flow from listener socket
- All done after feedback from David Gibson.
v4: - Eliminate any attempt to handle ICMPs from listener sockets.
- After feedback from David Gibson.
v5: - Small reshuffle in anticipation of following commits.
---
tap.c | 4 +--
tap.h | 2 ++
udp.c | 74 ++++++++++++++++++++++++++++++++++++++++++--------
udp_internal.h | 2 +-
udp_vu.c | 4 +--
5 files changed, 70 insertions(+), 16 deletions(-)
diff --git a/tap.c b/tap.c
index 9c91872..c0fa6ab 100644
--- a/tap.c
+++ b/tap.c
@@ -143,8 +143,8 @@ static void *tap_push_l2h(const struct ctx *c, void *buf, uint16_t
proto)
*
* Return: pointer at which to write the packet's payload
*/
-static void *tap_push_ip4h(struct iphdr *ip4h, struct in_addr src,
- struct in_addr dst, size_t l4len, uint8_t proto)
+void *tap_push_ip4h(struct iphdr *ip4h, struct in_addr src,
+ struct in_addr dst, size_t l4len, uint8_t proto)
{
uint16_t l3len = l4len + sizeof(*ip4h);
diff --git a/tap.h b/tap.h
index 0b3eb93..37da21d 100644
--- a/tap.h
+++ b/tap.h
@@ -47,6 +47,8 @@ static inline void tap_hdr_update(struct tap_hdr *thdr, size_t l2len)
void *tap_push_uh4(struct udphdr *uh, struct in_addr src, in_port_t sport,
struct in_addr dst, in_port_t dport,
const void *in, size_t dlen);
+void *tap_push_ip4h(struct iphdr *ip4h, struct in_addr src,
+ struct in_addr dst, size_t l4len, uint8_t proto);
void tap_udp4_send(const struct ctx *c, struct in_addr src, in_port_t sport,
struct in_addr dst, in_port_t dport,
const void *in, size_t dlen);
diff --git a/udp.c b/udp.c
index 923cc38..5124c36 100644
--- a/udp.c
+++ b/udp.c
@@ -87,6 +87,7 @@
#include <netinet/in.h>
#include <netinet/ip.h>
#include <netinet/udp.h>
+#include <netinet/ip_icmp.h>
#include <stdint.h>
#include <stddef.h>
#include <string.h>
@@ -402,25 +403,69 @@ static void udp_tap_prepare(const struct mmsghdr *mmh,
(*tap_iov)[UDP_IOV_PAYLOAD].iov_len = l4len;
}
+/**
+ * udp_send_conn_fail_icmp4() - Construct and send ICMPv4 to local peer
+ * @c: Execution context
+ * @ee: Extended error descriptor
+ * @ref: epoll reference
+ * @in: First bytes (max 8) of original UDP message body
+ * @dlen: Length of the read part of original UDP message body
+ */
+static void udp_send_conn_fail_icmp4(const struct ctx *c,
+ const struct sock_extended_err *ee,
+ const struct flowside *toside,
+ void *in, size_t dlen)
+{
+ struct in_addr oaddr = toside->oaddr.v4mapped.a4;
+ struct in_addr eaddr = toside->eaddr.v4mapped.a4;
+ in_port_t eport = toside->eport;
+ in_port_t oport = toside->oport;
+ struct {
+ struct icmphdr icmp4h;
+ struct iphdr ip4h;
+ struct udphdr uh;
+ char data[8];
+ } __attribute__((packed, aligned(__alignof__(max_align_t)))) msg;
+ size_t msglen = sizeof(msg) - sizeof(msg.data) + dlen;
+
+ memset(&msg, 0, sizeof(msg));
+ msg.icmp4h.type = ee->ee_type;
+ msg.icmp4h.code = ee->ee_code;
+
+ /* Reconstruct the original headers as returned in the ICMP message */
+ tap_push_ip4h(&msg.ip4h, eaddr, oaddr, dlen, IPPROTO_UDP);
+ tap_push_uh4(&msg.uh, eaddr, eport, oaddr, oport, in, dlen);
+ memcpy(&msg.data, in, dlen);
+
+ tap_icmp4_send(c, oaddr, eaddr, &msg, msglen);
+}
+
/**
* udp_sock_recverr() - Receive and clear an error from a socket
- * @s: Socket to receive from
+ * @c: Execution context
+ * @ref: epoll reference
*
* Return: 1 if error received and processed, 0 if no more errors in queue, < 0
* if there was an error reading the queue
*
* #syscalls recvmsg
*/
-static int udp_sock_recverr(int s)
+static int udp_sock_recverr(const struct ctx *c, union epoll_ref ref)
{
const struct sock_extended_err *ee;
const struct cmsghdr *hdr;
char buf[CMSG_SPACE(sizeof(*ee))];
+ char data[8];
+ int s = ref.fd;
+ struct iovec iov = {
+ .iov_base = data,
+ .iov_len = sizeof(data)
+ };
struct msghdr mh = {
.msg_name = NULL,
.msg_namelen = 0,
- .msg_iov = NULL,
- .msg_iovlen = 0,
+ .msg_iov = &iov,
+ .msg_iovlen = 1,
.msg_control = buf,
.msg_controllen = sizeof(buf),
};
@@ -450,8 +495,14 @@ static int udp_sock_recverr(int s)
}
ee = (const struct sock_extended_err *)CMSG_DATA(hdr);
+ if (ref.type == EPOLL_TYPE_UDP_REPLY) {
+ flow_sidx_t sidx = flow_sidx_opposite(ref.flowside);
+ const struct flowside *toside = flowside_at_sidx(sidx);
- /* TODO: When possible propagate and otherwise handle errors */
+ udp_send_conn_fail_icmp4(c, ee, toside, data, rc);
+ } else {
+ trace("Ignoring received cmsg on listener socket");
+ }
debug("%s error on UDP socket %i: %s",
str_ee_origin(ee), s, strerror_(ee->ee_errno));
@@ -461,15 +512,16 @@ static int udp_sock_recverr(int s)
/**
* udp_sock_errs() - Process errors on a socket
* @c: Execution context
- * @s: Socket to receive from
+ * @ref: epoll reference
* @events: epoll events bitmap
*
* Return: Number of errors handled, or < 0 if we have an unrecoverable error
*/
-int udp_sock_errs(const struct ctx *c, int s, uint32_t events)
+int udp_sock_errs(const struct ctx *c, union epoll_ref ref, uint32_t events)
{
unsigned n_err = 0;
socklen_t errlen;
+ int s = ref.fd;
int rc, err;
ASSERT(!c->no_udp);
@@ -478,7 +530,7 @@ int udp_sock_errs(const struct ctx *c, int s, uint32_t events)
return 0; /* Nothing to do */
/* Empty the error queue */
- while ((rc = udp_sock_recverr(s)) > 0)
+ while ((rc = udp_sock_recverr(c, ref)) > 0)
n_err += rc;
if (rc < 0)
@@ -510,7 +562,7 @@ int udp_sock_errs(const struct ctx *c, int s, uint32_t events)
* @c: Execution context
* @s: Socket to receive from
* @events: epoll events bitmap
- * @mmh mmsghdr array to receive into
+ * @mmh mmsghdr array to receive into
*
* Return: Number of datagrams received
*
@@ -558,7 +610,7 @@ static void udp_buf_listen_sock_handler(const struct ctx *c,
const socklen_t sasize = sizeof(udp_meta[0].s_in);
int n, i;
- if (udp_sock_errs(c, ref.fd, events) < 0) {
+ if (udp_sock_errs(c, ref, events) < 0) {
err("UDP: Unrecoverable error on listening socket:"
" (%s port %hu)", pif_name(ref.udp.pif), ref.udp.port);
/* FIXME: what now? close/re-open socket? */
@@ -661,7 +713,7 @@ static void udp_buf_reply_sock_handler(const struct ctx *c, union
epoll_ref ref,
from_s = uflow->s[ref.flowside.sidei];
- if (udp_sock_errs(c, from_s, events) < 0) {
+ if (udp_sock_errs(c, ref, events) < 0) {
flow_err(uflow, "Unrecoverable error on reply socket");
flow_err_details(uflow);
udp_flow_close(c, uflow);
diff --git a/udp_internal.h b/udp_internal.h
index cc80e30..3b081f5 100644
--- a/udp_internal.h
+++ b/udp_internal.h
@@ -30,5 +30,5 @@ size_t udp_update_hdr4(struct iphdr *ip4h, struct udp_payload_t *bp,
size_t udp_update_hdr6(struct ipv6hdr *ip6h, struct udp_payload_t *bp,
const struct flowside *toside, size_t dlen,
bool no_udp_csum);
-int udp_sock_errs(const struct ctx *c, int s, uint32_t events);
+int udp_sock_errs(const struct ctx *c, union epoll_ref ref, uint32_t events);
#endif /* UDP_INTERNAL_H */
diff --git a/udp_vu.c b/udp_vu.c
index 4123510..c26a223 100644
--- a/udp_vu.c
+++ b/udp_vu.c
@@ -227,7 +227,7 @@ void udp_vu_listen_sock_handler(const struct ctx *c, union epoll_ref
ref,
struct vu_virtq *vq = &vdev->vq[VHOST_USER_RX_QUEUE];
int i;
- if (udp_sock_errs(c, ref.fd, events) < 0) {
+ if (udp_sock_errs(c, ref, events) < 0) {
err("UDP: Unrecoverable error on listening socket:"
" (%s port %hu)", pif_name(ref.udp.pif), ref.udp.port);
return;
@@ -302,7 +302,7 @@ void udp_vu_reply_sock_handler(const struct ctx *c, union epoll_ref
ref,
ASSERT(!c->no_udp);
- if (udp_sock_errs(c, from_s, events) < 0) {
+ if (udp_sock_errs(c, ref, events) < 0) {
flow_err(uflow, "Unrecoverable error on reply socket");
flow_err_details(uflow);
udp_flow_close(c, uflow);
--
2.48.1
We will need to build the UDP header at other locations than in function
tap_udp6_send(), so we break that part out to a separate function.
Reviewed-by: David Gibson <david(a)gibson.dropbear.id.au>
Signed-off-by: Jon Maloy <jmaloy(a)redhat.com>
---
tap.c | 40 ++++++++++++++++++++++++++++++----------
tap.h | 4 ++++
2 files changed, 34 insertions(+), 10 deletions(-)
diff --git a/tap.c b/tap.c
index c0fa6ab..cb1bdba 100644
--- a/tap.c
+++ b/tap.c
@@ -266,27 +266,22 @@ static void *tap_push_ip6h(struct ipv6hdr *ip6h,
}
/**
- * tap_udp6_send() - Send UDP over IPv6 packet
+ * tap_push_uh6() - Build UDPv6 header with checksum
* @c: Execution context
* @src: IPv6 source address
* @sport: UDP source port
* @dst: IPv6 destination address
* @dport: UDP destination port
* @flow: Flow label
- * @in: UDP payload contents (not including UDP header)
+ * @in: UDP payload contents (not including UDP header)
* @dlen: UDP payload length (not including UDP header)
*/
-void tap_udp6_send(const struct ctx *c,
+void *tap_push_uh6(struct udphdr *uh,
const struct in6_addr *src, in_port_t sport,
const struct in6_addr *dst, in_port_t dport,
- uint32_t flow, void *in, size_t dlen)
+ void *in, size_t dlen)
{
size_t l4len = dlen + sizeof(struct udphdr);
- char buf[USHRT_MAX];
- struct ipv6hdr *ip6h = tap_push_l2h(c, buf, ETH_P_IPV6);
- struct udphdr *uh = tap_push_ip6h(ip6h, src, dst,
- l4len, IPPROTO_UDP, flow);
- char *data = (char *)(uh + 1);
const struct iovec iov = {
.iov_base = in,
.iov_len = dlen
@@ -297,8 +292,33 @@ void tap_udp6_send(const struct ctx *c,
uh->dest = htons(dport);
uh->len = htons(l4len);
csum_udp6(uh, src, dst, &payload);
- memcpy(data, in, dlen);
+ return uh + 1;
+}
+
+/**
+ * tap_udp6_send() - Send UDP over IPv6 packet
+ * @c: Execution context
+ * @src: IPv6 source address
+ * @sport: UDP source port
+ * @dst: IPv6 destination address
+ * @dport: UDP destination port
+ * @flow: Flow label
+ * @in: UDP payload contents (not including UDP header)
+ * @dlen: UDP payload length (not including UDP header)
+ */
+void tap_udp6_send(const struct ctx *c,
+ const struct in6_addr *src, in_port_t sport,
+ const struct in6_addr *dst, in_port_t dport,
+ uint32_t flow, void *in, size_t dlen)
+{
+ size_t l4len = dlen + sizeof(struct udphdr);
+ char buf[USHRT_MAX];
+ struct ipv6hdr *ip6h = tap_push_l2h(c, buf, ETH_P_IPV6);
+ struct udphdr *uh = tap_push_ip6h(ip6h, src, dst,
+ l4len, IPPROTO_UDP, flow);
+ char *data = tap_push_uh6(uh, src, sport, dst, dport, in, dlen);
+ memcpy(data, in, dlen);
tap_send_single(c, buf, dlen + (data - buf));
}
diff --git a/tap.h b/tap.h
index 37da21d..b7b8cef 100644
--- a/tap.h
+++ b/tap.h
@@ -47,6 +47,10 @@ static inline void tap_hdr_update(struct tap_hdr *thdr, size_t l2len)
void *tap_push_uh4(struct udphdr *uh, struct in_addr src, in_port_t sport,
struct in_addr dst, in_port_t dport,
const void *in, size_t dlen);
+void *tap_push_uh6(struct udphdr *uh,
+ const struct in6_addr *src, in_port_t sport,
+ const struct in6_addr *dst, in_port_t dport,
+ void *in, size_t dlen);
void *tap_push_ip4h(struct iphdr *ip4h, struct in_addr src,
struct in_addr dst, size_t l4len, uint8_t proto);
void tap_udp4_send(const struct ctx *c, struct in_addr src, in_port_t sport,
--
2.48.1
When a local peer sends a UDP message to a non-existing port on an
existing remote host, that host will return an ICMP message containing
the error code ICMP_PORT_UNREACH, plus the header and the first eight
bytes of the original message. If the sender socket has been connected,
it uses this message to issue a "Connection Refused" event to the user.
Until now, we have only read such events from the externally facing
socket, but we don't forward them back to the local sender because
we cannot read the ICMP message directly to user space. Because of
this, the local peer will hang and wait for a response that never
arrives.
We now fix this for IPv6 by recreating and forwarding a correct ICMP
message back to the internal sender. We synthesize the message based
on the information in the extended error structure, plus the returned
part of the original message body.
Note that for the sake of completeness, we even produce ICMP messages
for other error codes. We have noticed that at least ICMP_PROT_UNREACH
is propagated as an error event back to the user.
Signed-off-by: Jon Maloy <jmaloy(a)redhat.com>
---
tap.c | 8 ++++----
tap.h | 4 ++++
udp.c | 47 ++++++++++++++++++++++++++++++++++++++++++++++-
3 files changed, 54 insertions(+), 5 deletions(-)
diff --git a/tap.c b/tap.c
index cb1bdba..f2fb5f8 100644
--- a/tap.c
+++ b/tap.c
@@ -247,10 +247,10 @@ void tap_icmp4_send(const struct ctx *c, struct in_addr src, struct
in_addr dst,
*
* Return: pointer at which to write the packet's payload
*/
-static void *tap_push_ip6h(struct ipv6hdr *ip6h,
- const struct in6_addr *src,
- const struct in6_addr *dst,
- size_t l4len, uint8_t proto, uint32_t flow)
+void *tap_push_ip6h(struct ipv6hdr *ip6h,
+ const struct in6_addr *src,
+ const struct in6_addr *dst,
+ size_t l4len, uint8_t proto, uint32_t flow)
{
ip6h->payload_len = htons(l4len);
ip6h->priority = 0;
diff --git a/tap.h b/tap.h
index b7b8cef..67aa9e6 100644
--- a/tap.h
+++ b/tap.h
@@ -53,6 +53,10 @@ void *tap_push_uh6(struct udphdr *uh,
void *in, size_t dlen);
void *tap_push_ip4h(struct iphdr *ip4h, struct in_addr src,
struct in_addr dst, size_t l4len, uint8_t proto);
+void *tap_push_ip6h(struct ipv6hdr *ip6h,
+ const struct in6_addr *src,
+ const struct in6_addr *dst,
+ size_t l4len, uint8_t proto, uint32_t flow);
void tap_udp4_send(const struct ctx *c, struct in_addr src, in_port_t sport,
struct in_addr dst, in_port_t dport,
const void *in, size_t dlen);
diff --git a/udp.c b/udp.c
index 5124c36..5c44f28 100644
--- a/udp.c
+++ b/udp.c
@@ -88,6 +88,7 @@
#include <netinet/ip.h>
#include <netinet/udp.h>
#include <netinet/ip_icmp.h>
+#include <netinet/icmp6.h>
#include <stdint.h>
#include <stddef.h>
#include <string.h>
@@ -440,6 +441,46 @@ static void udp_send_conn_fail_icmp4(const struct ctx *c,
tap_icmp4_send(c, oaddr, eaddr, &msg, msglen);
}
+
+/**
+ * udp_send_conn_fail_icmp6() - Construct and send ICMPv6 to local peer
+ * @c: Execution context
+ * @ee: Extended error descriptor
+ * @ref: epoll reference
+ * @in: First bytes (max 8) of original UDP message body
+ * @dlen: Length of the read part of original UDP message body
+ * @flow: IPv6 flow identifier
+ */
+static void udp_send_conn_fail_icmp6(const struct ctx *c,
+ const struct sock_extended_err *ee,
+ const struct flowside *toside,
+ void *in, size_t dlen, uint32_t flow)
+{
+ const struct in6_addr *oaddr = &toside->oaddr.a6;
+ const struct in6_addr *eaddr = &toside->eaddr.a6;
+ in_port_t eport = toside->eport;
+ in_port_t oport = toside->oport;
+ struct {
+ struct icmp6_hdr icmp6h;
+ struct ipv6hdr ip6h;
+ struct udphdr uh;
+ char data[8];
+ } __attribute__((packed, aligned(__alignof__(max_align_t)))) msg;
+ size_t msglen = sizeof(msg) - sizeof(msg.data) + dlen;
+ size_t l4len = dlen + sizeof(struct udphdr);
+
+ memset(&msg, 0, sizeof(msg));
+ msg.icmp6h.icmp6_type = ee->ee_type;
+ msg.icmp6h.icmp6_code = ee->ee_code;
+
+ /* Reconstruct the original headers as returned in the ICMP message */
+ tap_push_ip6h(&msg.ip6h, eaddr, oaddr, l4len, IPPROTO_UDP, flow);
+ tap_push_uh6(&msg.uh, eaddr, eport, oaddr, oport, in, dlen);
+ memcpy(&msg.data, in, dlen);
+
+ tap_icmp6_send(c, oaddr, eaddr, &msg, msglen);
+}
+
/**
* udp_sock_recverr() - Receive and clear an error from a socket
* @c: Execution context
@@ -498,8 +539,12 @@ static int udp_sock_recverr(const struct ctx *c, union epoll_ref
ref)
if (ref.type == EPOLL_TYPE_UDP_REPLY) {
flow_sidx_t sidx = flow_sidx_opposite(ref.flowside);
const struct flowside *toside = flowside_at_sidx(sidx);
+ uint32_t flow = sidx.flowi;
- udp_send_conn_fail_icmp4(c, ee, toside, data, rc);
+ if (ee->ee_type == ICMP_DEST_UNREACH)
+ udp_send_conn_fail_icmp4(c, ee, toside, data, rc);
+ else if (ee->ee_type == ICMP6_DST_UNREACH)
+ udp_send_conn_fail_icmp6(c, ee, toside, data, rc, flow);
} else {
trace("Ignoring received cmsg on listener socket");
}
--
2.48.1
On Mon, 24 Feb 2025 14:24:47 -0500 Jon Maloy <jmaloy(a)redhat.com> wrote:When a local peer sends a UDP message to a non-existing port on an existing remote host, that host will return an ICMP message containing the error code ICMP_PORT_UNREACH, plus the header and the first eight bytes of the original message. If the sender socket has been connected, it uses this message to issue a "Connection Refused" event to the user. Until now, we have only read such events from the externally facing socket, but we don't forward them back to the local sender because we cannot read the ICMP message directly to user space. Because of this, the local peer will hang and wait for a response that never arrives. We now fix this for IPv6 by recreating and forwarding a correct ICMP message back to the internal sender. We synthesize the message based on the information in the extended error structure, plus the returned part of the original message body. Note that for the sake of completeness, we even produce ICMP messages for other error codes. We have noticed that at least ICMP_PROT_UNREACH is propagated as an error event back to the user.Have a look at https://bugs.passt.top/show_bug.cgi?id=63#c1 if you haven't (I didn't really go through it). While bug #63 is beyond the scope of this series, if you register an account on the bug tracker you can be Cc'ed on comments. -- Stefano
On 2025-02-25 09:19, Stefano Brivio wrote:On Mon, 24 Feb 2025 14:24:47 -0500 Jon Maloy <jmaloy(a)redhat.com> wrote:For some reason I never receive a confirmation email when trying to create an account, nor any reset email in case I have one (not sure.) Anyway, I´ll try to introduce some of this. The 1280 byte IPCv6 returned data should be the easiest one. ///jonWhen a local peer sends a UDP message to a non-existing port on an existing remote host, that host will return an ICMP message containing the error code ICMP_PORT_UNREACH, plus the header and the first eight bytes of the original message. If the sender socket has been connected, it uses this message to issue a "Connection Refused" event to the user. Until now, we have only read such events from the externally facing socket, but we don't forward them back to the local sender because we cannot read the ICMP message directly to user space. Because of this, the local peer will hang and wait for a response that never arrives. We now fix this for IPv6 by recreating and forwarding a correct ICMP message back to the internal sender. We synthesize the message based on the information in the extended error structure, plus the returned part of the original message body. Note that for the sake of completeness, we even produce ICMP messages for other error codes. We have noticed that at least ICMP_PROT_UNREACH is propagated as an error event back to the user.Have a look at https://bugs.passt.top/show_bug.cgi?id=63#c1 if you haven't (I didn't really go through it). While bug #63 is beyond the scope of this series, if you register an account on the bug tracker you can be Cc'ed on comments.
On Wed, 26 Feb 2025 15:28:58 -0500 Jon Maloy <jmaloy(a)redhat.com> wrote:On 2025-02-25 09:19, Stefano Brivio wrote:I review them manually several times per day because of spam. You have it now.On Mon, 24 Feb 2025 14:24:47 -0500 Jon Maloy <jmaloy(a)redhat.com> wrote:For some reason I never receive a confirmation email when trying to create an accountWhen a local peer sends a UDP message to a non-existing port on an existing remote host, that host will return an ICMP message containing the error code ICMP_PORT_UNREACH, plus the header and the first eight bytes of the original message. If the sender socket has been connected, it uses this message to issue a "Connection Refused" event to the user. Until now, we have only read such events from the externally facing socket, but we don't forward them back to the local sender because we cannot read the ICMP message directly to user space. Because of this, the local peer will hang and wait for a response that never arrives. We now fix this for IPv6 by recreating and forwarding a correct ICMP message back to the internal sender. We synthesize the message based on the information in the extended error structure, plus the returned part of the original message body. Note that for the sake of completeness, we even produce ICMP messages for other error codes. We have noticed that at least ICMP_PROT_UNREACH is propagated as an error event back to the user.Have a look at https://bugs.passt.top/show_bug.cgi?id=63#c1 if you haven't (I didn't really go through it). While bug #63 is beyond the scope of this series, if you register an account on the bug tracker you can be Cc'ed on comments.nor any reset email in case I have one (not sure.)You don't have one.Anyway, I´ll try to introduce some of this. The 1280 byte IPCv6 returned data should be the easiest one.Again, I'm not sure if it's beyond the scope of this series or not. I guess if there are quick changes reducing code/patch churn later it makes sense, but I didn't really go through that. -- Stefano