The tests create temporary files and fifos in a number of places.
Some of them can interfere with later test runs, and are awkward to
clean up. Consolidate them in a single per-run directory in /tmp
which gets cleaned up automatically.
This is based on the earlier userns cleanup series.
David Gibson (12):
test: Group tests by context then protocol, rather than the reverse
test: Remove stale comments from context_setup_guest()
test: Remove unused variable FFMPEG_PID_FILE
test: Actually run cleanup function
test: Create common state directories for temporary files
test: Move passt_test_log_pipe to state directory
test: Move context temporary files to state dir
test: Dont regnerate small test file in pasta/tcp
test: Use paths in __STATEDIR__ instead of 'temp' and 'tempdir'
directives
test: Move pause temporary file to state directory
test: Store pcap files in $LOGDIR instead of /tmp
test: Move pidfiles and nsholder sockets into state directory
test/build/all | 31 ++++---
test/demo/passt | 9 +-
test/demo/pasta | 12 ++-
test/demo/podman | 11 ++-
test/distro/debian | 2 +-
test/distro/fedora | 2 +-
test/distro/opensuse | 16 ++--
test/distro/ubuntu | 8 +-
test/lib/context | 61 +++++++-------
test/lib/layout | 16 ++--
test/lib/setup | 84 ++++++++++---------
test/lib/term | 18 ++--
test/lib/test | 14 +---
test/lib/video | 1 -
test/{dhcp/passt => passt/dhcp} | 2 +-
test/{ndp/passt => passt/ndp} | 2 +-
test/{shutdown/passt => passt/shutdown} | 4 +-
test/{tcp/passt => passt/tcp} | 6 +-
test/{udp/passt => passt/udp} | 8 +-
test/{icmp/passt_in_ns => passt_in_ns/icmp} | 2 +-
.../passt_in_ns => passt_in_ns/shutdown} | 4 +-
test/{tcp/passt_in_ns => passt_in_ns/tcp} | 10 +--
test/{udp/passt_in_ns => passt_in_ns/udp} | 8 +-
test/{dhcp/pasta => pasta/dhcp} | 2 +-
test/{ndp/pasta => pasta/ndp} | 2 +-
test/{tcp/pasta => pasta/tcp} | 13 ++-
test/{udp/pasta => pasta/udp} | 20 ++---
test/run | 48 +++++------
28 files changed, 202 insertions(+), 214 deletions(-)
rename test/{dhcp/passt => passt/dhcp} (98%)
rename test/{ndp/passt => passt/ndp} (95%)
rename test/{shutdown/passt => passt/shutdown} (80%)
rename test/{tcp/passt => passt/tcp} (96%)
rename test/{udp/passt => passt/udp} (88%)
rename test/{icmp/passt_in_ns => passt_in_ns/icmp} (94%)
rename test/{shutdown/passt_in_ns => passt_in_ns/shutdown} (79%)
rename test/{tcp/passt_in_ns => passt_in_ns/tcp} (97%)
rename test/{udp/passt_in_ns => passt_in_ns/udp} (97%)
rename test/{dhcp/pasta => pasta/dhcp} (96%)
rename test/{ndp/pasta => pasta/ndp} (95%)
rename test/{tcp/pasta => pasta/tcp} (95%)
rename test/{udp/pasta => pasta/udp} (74%)
--
2.37.3
e.g. passt/dhcp rather than dhcp/passt. This is more consistent with the
two_guests and other test groups, and makes some other cleanups simpler.
Signed-off-by: David Gibson <david(a)gibson.dropbear.id.au>
---
test/{dhcp/passt => passt/dhcp} | 2 +-
test/{ndp/passt => passt/ndp} | 2 +-
test/{shutdown/passt => passt/shutdown} | 2 +-
test/{tcp/passt => passt/tcp} | 2 +-
test/{udp/passt => passt/udp} | 2 +-
test/{icmp/passt_in_ns => passt_in_ns/icmp} | 2 +-
.../passt_in_ns => passt_in_ns/shutdown} | 2 +-
test/{tcp/passt_in_ns => passt_in_ns/tcp} | 2 +-
test/{udp/passt_in_ns => passt_in_ns/udp} | 2 +-
test/{dhcp/pasta => pasta/dhcp} | 2 +-
test/{ndp/pasta => pasta/ndp} | 2 +-
test/{tcp/pasta => pasta/tcp} | 2 +-
test/{udp/pasta => pasta/udp} | 2 +-
test/run | 38 +++++++++----------
14 files changed, 32 insertions(+), 32 deletions(-)
rename test/{dhcp/passt => passt/dhcp} (98%)
rename test/{ndp/passt => passt/ndp} (95%)
rename test/{shutdown/passt => passt/shutdown} (87%)
rename test/{tcp/passt => passt/tcp} (98%)
rename test/{udp/passt => passt/udp} (97%)
rename test/{icmp/passt_in_ns => passt_in_ns/icmp} (94%)
rename test/{shutdown/passt_in_ns => passt_in_ns/shutdown} (87%)
rename test/{tcp/passt_in_ns => passt_in_ns/tcp} (99%)
rename test/{udp/passt_in_ns => passt_in_ns/udp} (98%)
rename test/{dhcp/pasta => pasta/dhcp} (96%)
rename test/{ndp/pasta => pasta/ndp} (95%)
rename test/{tcp/pasta => pasta/tcp} (98%)
rename test/{udp/pasta => pasta/udp} (98%)
diff --git a/test/dhcp/passt b/test/passt/dhcp
similarity index 98%
rename from test/dhcp/passt
rename to test/passt/dhcp
index 37bf6b5..eef5183 100644
--- a/test/dhcp/passt
+++ b/test/passt/dhcp
@@ -6,7 +6,7 @@
# PASTA - Pack A Subtle Tap Abstraction
# for network namespace/tap device mode
#
-# test/dhcp/passt - Check DHCP and DHCPv6 functionality in passt mode
+# test/passt/dhcp - Check DHCP and DHCPv6 functionality in passt mode
#
# Copyright (c) 2021 Red Hat GmbH
# Author: Stefano Brivio <sbrivio(a)redhat.com>
diff --git a/test/ndp/passt b/test/passt/ndp
similarity index 95%
rename from test/ndp/passt
rename to test/passt/ndp
index c73fd4d..280b3ae 100644
--- a/test/ndp/passt
+++ b/test/passt/ndp
@@ -6,7 +6,7 @@
# PASTA - Pack A Subtle Tap Abstraction
# for network namespace/tap device mode
#
-# test/ndp/passt - Check NDP functionality in passt mode
+# test/passt/ndp - Check NDP functionality in passt mode
#
# Copyright (c) 2021 Red Hat GmbH
# Author: Stefano Brivio <sbrivio(a)redhat.com>
diff --git a/test/shutdown/passt b/test/passt/shutdown
similarity index 87%
rename from test/shutdown/passt
rename to test/passt/shutdown
index ac8ff08..ce90ea9 100644
--- a/test/shutdown/passt
+++ b/test/passt/shutdown
@@ -6,7 +6,7 @@
# PASTA - Pack A Subtle Tap Abstraction
# for network namespace/tap device mode
#
-# test/shutdown/passt - Shut down passt (or pasta) and check exit code (will
+# test/passt/shutdown - Shut down passt (or pasta) and check exit code (will
# detect valgrind errors amongst others)
#
# Copyright (c) 2022 Red Hat GmbH
diff --git a/test/tcp/passt b/test/passt/tcp
similarity index 98%
rename from test/tcp/passt
rename to test/passt/tcp
index 265f270..d5c8164 100644
--- a/test/tcp/passt
+++ b/test/passt/tcp
@@ -6,7 +6,7 @@
# PASTA - Pack A Subtle Tap Abstraction
# for network namespace/tap device mode
#
-# test/tcp/passt - Check TCP functionality in passt mode
+# test/passt/tcp - Check TCP functionality in passt mode
#
# Copyright (c) 2021 Red Hat GmbH
# Author: Stefano Brivio <sbrivio(a)redhat.com>
diff --git a/test/udp/passt b/test/passt/udp
similarity index 97%
rename from test/udp/passt
rename to test/passt/udp
index a14e6d2..56d01b3 100644
--- a/test/udp/passt
+++ b/test/passt/udp
@@ -6,7 +6,7 @@
# PASTA - Pack A Subtle Tap Abstraction
# for network namespace/tap device mode
#
-# test/udp/passt - Check UDP functionality in passt mode
+# test/passt/udp - Check UDP functionality in passt mode
#
# Copyright (c) 2021 Red Hat GmbH
# Author: Stefano Brivio <sbrivio(a)redhat.com>
diff --git a/test/icmp/passt_in_ns b/test/passt_in_ns/icmp
similarity index 94%
rename from test/icmp/passt_in_ns
rename to test/passt_in_ns/icmp
index e4ac4ff..f326d4b 100644
--- a/test/icmp/passt_in_ns
+++ b/test/passt_in_ns/icmp
@@ -6,7 +6,7 @@
# PASTA - Pack A Subtle Tap Abstraction
# for network namespace/tap device mode
#
-# test/icmp/passt_in_ns - Check ICMP/ICMPv6 functionality for passt in ns
+# test/passt_in_ns/icmp - Check ICMP/ICMPv6 functionality for passt in ns
#
# Copyright (c) 2021 Red Hat GmbH
# Author: Stefano Brivio <sbrivio(a)redhat.com>
diff --git a/test/shutdown/passt_in_ns b/test/passt_in_ns/shutdown
similarity index 87%
rename from test/shutdown/passt_in_ns
rename to test/passt_in_ns/shutdown
index 3808adb..abe9d6c 100644
--- a/test/shutdown/passt_in_ns
+++ b/test/passt_in_ns/shutdown
@@ -6,7 +6,7 @@
# PASTA - Pack A Subtle Tap Abstraction
# for network namespace/tap device mode
#
-# test/shutdown/passt_in_ns - Shut down passt and check exit code (will detect
+# test/passt_in_ns/shutdown - Shut down passt and check exit code (will detect
# valgrind errors amongst others)
#
# Copyright (c) 2022 Red Hat GmbH
diff --git a/test/tcp/passt_in_ns b/test/passt_in_ns/tcp
similarity index 99%
rename from test/tcp/passt_in_ns
rename to test/passt_in_ns/tcp
index a248f00..5ec95e8 100644
--- a/test/tcp/passt_in_ns
+++ b/test/passt_in_ns/tcp
@@ -6,7 +6,7 @@
# PASTA - Pack A Subtle Tap Abstraction
# for network namespace/tap device mode
#
-# test/tcp/passt_in_ns - Check TCP functionality for passt in ns with pasta
+# test/passt_in_ns/tcp - Check TCP functionality for passt in ns with pasta
#
# Copyright (c) 2021 Red Hat GmbH
# Author: Stefano Brivio <sbrivio(a)redhat.com>
diff --git a/test/udp/passt_in_ns b/test/passt_in_ns/udp
similarity index 98%
rename from test/udp/passt_in_ns
rename to test/passt_in_ns/udp
index d5f08fe..c22a68f 100644
--- a/test/udp/passt_in_ns
+++ b/test/passt_in_ns/udp
@@ -6,7 +6,7 @@
# PASTA - Pack A Subtle Tap Abstraction
# for network namespace/tap device mode
#
-# test/udp/passt_in_ns - Check UDP functionality for passt in ns and pasta
+# test/passt_in_ns/udp - Check UDP functionality for passt in ns and pasta
#
# Copyright (c) 2021 Red Hat GmbH
# Author: Stefano Brivio <sbrivio(a)redhat.com>
diff --git a/test/dhcp/pasta b/test/pasta/dhcp
similarity index 96%
rename from test/dhcp/pasta
rename to test/pasta/dhcp
index d1e9611..80eabf5 100644
--- a/test/dhcp/pasta
+++ b/test/pasta/dhcp
@@ -6,7 +6,7 @@
# PASTA - Pack A Subtle Tap Abstraction
# for network namespace/tap device mode
#
-# test/dhcp/pasta - Check DHCP and DHCPv6 functionality in pasta mode
+# test/pasta/dhcp - Check DHCP and DHCPv6 functionality in pasta mode
#
# Copyright (c) 2021 Red Hat GmbH
# Author: Stefano Brivio <sbrivio(a)redhat.com>
diff --git a/test/ndp/pasta b/test/pasta/ndp
similarity index 95%
rename from test/ndp/pasta
rename to test/pasta/ndp
index d776055..d2b2c0b 100644
--- a/test/ndp/pasta
+++ b/test/pasta/ndp
@@ -6,7 +6,7 @@
# PASTA - Pack A Subtle Tap Abstraction
# for network namespace/tap device mode
#
-# test/ndp/pasta - Check DHCP and DHCPv6 functionality in pasta mode
+# test/pasta/ndp - Check DHCP and DHCPv6 functionality in pasta mode
#
# Copyright (c) 2021 Red Hat GmbH
# Author: Stefano Brivio <sbrivio(a)redhat.com>
diff --git a/test/tcp/pasta b/test/pasta/tcp
similarity index 98%
rename from test/tcp/pasta
rename to test/pasta/tcp
index a13a2ff..7c7de06 100644
--- a/test/tcp/pasta
+++ b/test/pasta/tcp
@@ -6,7 +6,7 @@
# PASTA - Pack A Subtle Tap Abstraction
# for network namespace/tap device mode
#
-# test/tcp/pasta - Check TCP functionality for pasta
+# test/pasta/tcp - Check TCP functionality for pasta
#
# Copyright (c) 2021 Red Hat GmbH
# Author: Stefano Brivio <sbrivio(a)redhat.com>
diff --git a/test/udp/pasta b/test/pasta/udp
similarity index 98%
rename from test/udp/pasta
rename to test/pasta/udp
index 0767e0b..0e58152 100644
--- a/test/udp/pasta
+++ b/test/pasta/udp
@@ -6,7 +6,7 @@
# PASTA - Pack A Subtle Tap Abstraction
# for network namespace/tap device mode
#
-# test/udp/pasta - Check UDP functionality for pasta
+# test/pasta/udp - Check UDP functionality for pasta
#
# Copyright (c) 2021 Red Hat GmbH
# Author: Stefano Brivio <sbrivio(a)redhat.com>
diff --git a/test/run b/test/run
index 0ec1334..d8b60bf 100755
--- a/test/run
+++ b/test/run
@@ -74,40 +74,40 @@ run() {
teardown distro
setup pasta
- test ndp/pasta
- test dhcp/pasta
- test tcp/pasta
- test udp/pasta
- test shutdown/passt
+ test pasta/ndp
+ test pasta/dhcp
+ test pasta/tcp
+ test pasta/udp
+ test passt/shutdown
teardown pasta
setup passt
- test ndp/passt
- test dhcp/passt
- test tcp/passt
- test udp/passt
- test shutdown/passt
+ test passt/ndp
+ test passt/dhcp
+ test passt/tcp
+ test passt/udp
+ test passt/shutdown
teardown passt
VALGRIND=1
setup passt_in_ns
- test ndp/passt
- test dhcp/passt
- test icmp/passt_in_ns
- test tcp/passt_in_ns
- test udp/passt_in_ns
- test shutdown/passt_in_ns
+ test passt/ndp
+ test passt/dhcp
+ test passt_in_ns/icmp
+ test passt_in_ns/tcp
+ test passt_in_ns/udp
+ test passt_in_ns/shutdown
teardown passt_in_ns
VALGRIND=0
setup passt_in_ns
- test ndp/passt
- test dhcp/passt
+ test passt/ndp
+ test passt/dhcp
test perf/passt_tcp
test perf/passt_udp
test perf/pasta_tcp
test perf/pasta_udp
- test shutdown/passt_in_ns
+ test passt_in_ns/shutdown
teardown passt_in_ns
setup two_guests
--
2.37.3
These are some leftover debugging commands that were commented out but
which I forgot to remove.
Signed-off-by: David Gibson <david(a)gibson.dropbear.id.au>
---
test/lib/context | 2 --
1 file changed, 2 deletions(-)
diff --git a/test/lib/context b/test/lib/context
index 9c1a65f..ccb0004 100644
--- a/test/lib/context
+++ b/test/lib/context
@@ -45,8 +45,6 @@ context_setup_nsenter() {
# $1: Context name
# $2: CID to use for vsock
context_setup_guest() {
- #exec > /tmp/.passt_test_log_pipe 2>&1
- #set -x
__name="$1"
__cid="$2"
__prefix="${LOGDIR}/context_${__name}"
--
2.37.3
FFPMPEG_PID_FILE is set (creating a temporary file), then never used. Signed-off-by: David Gibson <david(a)gibson.dropbear.id.au> --- test/lib/video | 1 - 1 file changed, 1 deletion(-) diff --git a/test/lib/video b/test/lib/video index 22e73bb..f609abf 100755 --- a/test/lib/video +++ b/test/lib/video @@ -13,7 +13,6 @@ # Copyright (c) 2021-2022 Red Hat GmbH # Author: Stefano Brivio <sbrivio(a)redhat.com> -FFMPEG_PID_FILE="$(mktemp)" VIDEO_START_SECONDS= VIDEO_NAME= -- 2.37.3
We install a cleanup() function with 'trap' in order to clean up temporary
files we generate during the tests. However, we deinstall it after
run_term, which means it won't run in most of the cases where it would be
useful. Even if "run from_term" exits with an error, that error will be
hidden from the run_term wrapper because it's within a tmux session, so we
will return from run_term normally, uninstall the trap and never clean up.
In fact there's no reason to uninstall the trap at all, it works just as
well on the success exit path as an error exit path.
Signed-off-by: David Gibson <david(a)gibson.dropbear.id.au>
---
test/run | 1 -
1 file changed, 1 deletion(-)
diff --git a/test/run b/test/run
index d8b60bf..9b0227b 100755
--- a/test/run
+++ b/test/run
@@ -178,7 +178,6 @@ else
:> "${LOGFILE}"
trap "cleanup" EXIT
run_term
- trap "" EXIT
fi
[ ${DEMO} -eq 1 ] && exit 0
--
2.37.3
The test scripts create a bunch of temporary files to keep track of
internal state. Some are made in /tmp with individual mktemp calls, some
go in the passt source directory, and some go in $LOGDIR. This can
sometimes make it messy to clean up after failed test runs.
Start cleaning this up by creating a single "state" directory ($STATEBASE)
in /tmp for all the state or temporary files used by a single test run.
Clean it up automatically in cleanup() - except when DEBUG==1, because
those files can be useful for debugging test script failures.
We create subdirectories under $STATEBASE for each setup function, exposed
as $STATESETUP. We also create subdirectories for each test script and
expose those to the scripts as __STATEDIR__.
Signed-off-by: David Gibson <david(a)gibson.dropbear.id.au>
---
test/lib/setup | 2 ++
test/lib/term | 2 +-
test/lib/test | 4 ++++
test/run | 2 ++
4 files changed, 9 insertions(+), 1 deletion(-)
diff --git a/test/lib/setup b/test/lib/setup
index 957a9cc..b0420fb 100755
--- a/test/lib/setup
+++ b/test/lib/setup
@@ -394,6 +394,8 @@ teardown_demo_podman() {
# $*: Suffix list of setup_*() functions to be called
setup() {
for arg do
+ STATESETUP="${STATEBASE}/${arg}"
+ mkdir -p "${STATESETUP}"
eval setup_${arg}
done
}
diff --git a/test/lib/term b/test/lib/term
index ae99010..b2a45e4 100755
--- a/test/lib/term
+++ b/test/lib/term
@@ -639,7 +639,7 @@ pause_continue() {
# run_term() - Start tmux session, running entry point, with recording if needed
run_term() {
- TMUX="tmux new-session -s passt_test -ePCAP=$PCAP -eDEBUG=$DEBUG"
+ TMUX="tmux new-session -s passt_test -eSTATEBASE=$STATEBASE -ePCAP=$PCAP
-eDEBUG=$DEBUG"
if [ ${CI} -eq 1 ]; then
printf '\e[8;50;240t'
diff --git a/test/lib/test b/test/lib/test
index 15ad685..052ebf0 100755
--- a/test/lib/test
+++ b/test/lib/test
@@ -350,6 +350,10 @@ test_one() {
[ ${CI} -eq 1 ] && video_link "${1}"
TEST_ONE_subs="$(list_add_pair "" "__BASEPATH__"
"${BASEPATH}")"
+ TEST_ONE_subs="$(list_add_pair "${TEST_ONE_subs}"
"__STATESETUP__" "${STATESETUP}")"
+ STATEDIR="${STATEBASE}/${1}"
+ mkdir -p "${STATEDIR}"
+ TEST_ONE_subs="$(list_add_pair "${TEST_ONE_subs}"
"__STATEDIR__" "${STATEDIR}")"
TEST_ONE_nok=-1
TEST_ONE_perf_nok=0
TEST_ONE_skip=0
diff --git a/test/run b/test/run
index 9b0227b..58d9b49 100755
--- a/test/run
+++ b/test/run
@@ -48,6 +48,7 @@ COMMIT="$(git log --oneline --no-decorate -1)"
# cleanup() - Remove temporary files
cleanup() {
+ [ ${DEBUG} -eq 1 ] || rm -rf "${STATEBASE}"
rm -f /tmp/.passt_test_log_pipe
}
@@ -176,6 +177,7 @@ else
rm -rf "${LOGDIR}"
mkdir -p "${LOGDIR}"
:> "${LOGFILE}"
+ STATEBASE="$(mktemp -d --tmpdir passt-tests-XXXXXX)"
trap "cleanup" EXIT
run_term
fi
--
2.37.3
We use this fifo to send messages to the information pane. Put it in the
state directory so it doesn't need its own cleanup.
Signed-off-by: David Gibson <david(a)gibson.dropbear.id.au>
---
test/lib/layout | 16 ++++++++--------
test/lib/term | 12 ++++++------
test/run | 7 ++-----
3 files changed, 16 insertions(+), 19 deletions(-)
diff --git a/test/lib/layout b/test/lib/layout
index ea71ad5..f3a0873 100644
--- a/test/lib/layout
+++ b/test/lib/layout
@@ -27,7 +27,7 @@ layout_host() {
get_info_cols
- tmux send-keys -l -t ${PANE_INFO} 'while cat /tmp/.passt_test_log_pipe; do :;
done'
+ tmux send-keys -l -t ${PANE_INFO} 'while cat
'"$STATEBASE/log_pipe"'; do :; done'
tmux send-keys -t ${PANE_INFO} -N 100 C-m
tmux select-pane -t ${PANE_INFO} -T "test log"
@@ -61,7 +61,7 @@ layout_pasta() {
get_info_cols
- tmux send-keys -l -t ${PANE_INFO} 'while cat /tmp/.passt_test_log_pipe; do :;
done'
+ tmux send-keys -l -t ${PANE_INFO} 'while cat
'"$STATEBASE/log_pipe"'; do :; done'
tmux send-keys -t ${PANE_INFO} -N 100 C-m
tmux select-pane -t ${PANE_INFO} -T "test log"
@@ -95,7 +95,7 @@ layout_passt() {
tmux pipe-pane -O -t ${PANE_GUEST} "cat >> ${LOGDIR}/pane_guest.log"
tmux select-pane -t ${PANE_GUEST} -T "guest"
- tmux send-keys -l -t ${PANE_INFO} 'while cat /tmp/.passt_test_log_pipe; do :;
done'
+ tmux send-keys -l -t ${PANE_INFO} 'while cat
'"$STATEBASE/log_pipe"'; do :; done'
tmux send-keys -t ${PANE_INFO} -N 100 C-m
tmux select-pane -t ${PANE_INFO} -T "test log"
@@ -131,7 +131,7 @@ layout_passt_in_pasta() {
pane_watch_contexts ${PANE_GUEST} "guest" qemu guest
pane_watch_contexts ${PANE_NS} "namespace" ns
- tmux send-keys -l -t ${PANE_INFO} 'while cat /tmp/.passt_test_log_pipe; do :;
done'
+ tmux send-keys -l -t ${PANE_INFO} 'while cat
'"$STATEBASE/log_pipe"'; do :; done'
tmux send-keys -t ${PANE_INFO} -N 100 C-m
tmux select-pane -t ${PANE_INFO} -T "test log"
@@ -174,7 +174,7 @@ layout_two_guests() {
pane_watch_contexts ${PANE_GUEST_1} "guest #1 in namespace #1" qemu_1 guest_1
pane_watch_contexts ${PANE_GUEST_2} "guest #2 in namespace #2" qemu_2 guest_2
- tmux send-keys -l -t ${PANE_INFO} 'while cat /tmp/.passt_test_log_pipe; do :;
done'
+ tmux send-keys -l -t ${PANE_INFO} 'while cat
'"$STATEBASE/log_pipe"'; do :; done'
tmux send-keys -t ${PANE_INFO} -N 100 C-m
tmux select-pane -t ${PANE_INFO} -T "test log"
@@ -210,7 +210,7 @@ layout_demo_pasta() {
tmux pipe-pane -O -t ${PANE_NS} "cat >> ${LOGDIR}/pane_ns.log"
tmux select-pane -t ${PANE_NS} -T "namespace"
- tmux send-keys -l -t ${PANE_INFO} 'while cat /tmp/.passt_test_log_pipe; do :;
done'
+ tmux send-keys -l -t ${PANE_INFO} 'while cat
'"$STATEBASE/log_pipe"'; do :; done'
tmux send-keys -t ${PANE_INFO} -N 100 C-m
tmux select-pane -t ${PANE_INFO} -T ""
@@ -246,7 +246,7 @@ layout_demo_passt() {
tmux pipe-pane -O -t ${PANE_GUEST} "cat >> ${LOGDIR}/pane_guest.log"
tmux select-pane -t ${PANE_GUEST} -T "guest"
- tmux send-keys -l -t ${PANE_INFO} 'while cat /tmp/.passt_test_log_pipe; do :;
done'
+ tmux send-keys -l -t ${PANE_INFO} 'while cat
'"$STATEBASE/log_pipe"'; do :; done'
tmux send-keys -t ${PANE_INFO} -N 100 C-m
tmux select-pane -t ${PANE_INFO} -T ""
@@ -285,7 +285,7 @@ layout_demo_podman() {
tmux pipe-pane -O -t ${PANE_NS2} "cat >> ${LOGDIR}/pane_ns2.log"
tmux select-pane -t ${PANE_NS2} -T "Podman with pasta"
- tmux send-keys -l -t ${PANE_INFO} 'while cat /tmp/.passt_test_log_pipe; do :;
done'
+ tmux send-keys -l -t ${PANE_INFO} 'while cat
'"$STATEBASE/log_pipe"'; do :; done'
tmux send-keys -t ${PANE_INFO} -N 100 C-m
tmux select-pane -t ${PANE_INFO} -T ""
diff --git a/test/lib/term b/test/lib/term
index b2a45e4..2321664 100755
--- a/test/lib/term
+++ b/test/lib/term
@@ -31,7 +31,7 @@ PR_DELAY_INIT=100 # ms
# $@: Message to print
info() {
tmux select-pane -t ${PANE_INFO}
- echo "${@}" >> /tmp/.passt_test_log_pipe
+ echo "${@}" >> $STATEBASE/log_pipe
echo "${@}" >> "${LOGFILE}"
}
@@ -39,7 +39,7 @@ info() {
# $@: Message to print
info_n() {
tmux select-pane -t ${PANE_INFO}
- printf "${@}" >> /tmp/.passt_test_log_pipe
+ printf "${@}" >> $STATEBASE/log_pipe
printf "${@}" >> "${LOGFILE}"
}
@@ -47,7 +47,7 @@ info_n() {
# $@: Message to print
info_nolog() {
tmux select-pane -t ${PANE_INFO}
- echo "${@}" >> /tmp/.passt_test_log_pipe
+ echo "${@}" >> $STATEBASE/log_pipe
}
# info_nolog() - Print message to log file
@@ -365,7 +365,7 @@ status_test_start() {
info_check() {
switch_pane ${PANE_INFO}
- printf "${PR_YELLOW}?${PR_NC} ${@}" >> /tmp/.passt_test_log_pipe
+ printf "${PR_YELLOW}?${PR_NC} ${@}" >> $STATEBASE/log_pipe
printf "? ${@}" >> "${LOGFILE}"
}
@@ -373,7 +373,7 @@ info_check() {
info_check_passed() {
switch_pane ${PANE_INFO}
- printf "\n" >> /tmp/.passt_test_log_pipe
+ printf "\n" >> $STATEBASE/log_pipe
printf "\n" >> ${LOGFILE}
}
@@ -381,7 +381,7 @@ info_check_passed() {
info_check_failed() {
switch_pane ${PANE_INFO}
- printf " ${PR_RED}!${PR_NC}\n" >> /tmp/.passt_test_log_pipe
+ printf " ${PR_RED}!${PR_NC}\n" >> $STATEBASE/log_pipe
printf " < failed.\n" >> "${LOGFILE}"
}
diff --git a/test/run b/test/run
index 58d9b49..4bb9cd8 100755
--- a/test/run
+++ b/test/run
@@ -49,13 +49,11 @@ COMMIT="$(git log --oneline --no-decorate -1)"
# cleanup() - Remove temporary files
cleanup() {
[ ${DEBUG} -eq 1 ] || rm -rf "${STATEBASE}"
- rm -f /tmp/.passt_test_log_pipe
}
# run() - Call setup functions, run tests, handle exit from test session
run() {
- rm -f /tmp/.passt_test_log_pipe
- mkfifo /tmp/.passt_test_log_pipe
+ mkfifo $STATEBASE/log_pipe
term
perf_init
@@ -131,8 +129,7 @@ run() {
# demo() - Simpler path for demo purposes
demo() {
- rm -f /tmp/.passt_test_log_pipe
- mkfifo /tmp/.passt_test_log_pipe
+ mkfifo $STATEBASE/log_pipe
FAST=0
--
2.37.3
Currently the context command dispatch subsystem creates a bunch of
temporary files in $LOGDIR, which is messy. Store them in $STATEDIR which
is for precisely this purpose. The logs from each context still go into
$LOGDIR.
Signed-off-by: David Gibson <david(a)gibson.dropbear.id.au>
---
test/lib/context | 59 +++++++++++++++++++++++++-----------------------
1 file changed, 31 insertions(+), 28 deletions(-)
diff --git a/test/lib/context b/test/lib/context
index ccb0004..c54cce9 100644
--- a/test/lib/context
+++ b/test/lib/context
@@ -17,17 +17,17 @@
# $1: Context name
context_setup_common() {
__name="$1"
- __prefix="${LOGDIR}/context_${__name}"
- echo -n "${__name}$ " > "${__prefix}.log"
+ __log="${LOGDIR}/context_${__name}.log"
+ echo -n "${__name}$ " > "${__log}"
}
# context_setup_host() - Create a new context for running commands on the host
# $1: Context name
context_setup_host() {
__name="$1"
- __prefix="${LOGDIR}/context_${__name}"
+ __enter="${STATESETUP}/context_${__name}.enter"
context_setup_common "${__name}"
- echo sh -c > "${__prefix}.enter"
+ echo sh -c > "${__enter}"
}
# context_setup_nsenter() - Create a new context for running commands in a namespace
@@ -36,9 +36,9 @@ context_setup_host() {
context_setup_nsenter() {
__name="$1"
shift
- __prefix="${LOGDIR}/context_${__name}"
+ __enter="${STATESETUP}/context_${__name}.enter"
context_setup_common "${__name}"
- echo "nsenter $@ sh -c" > "${__prefix}.enter"
+ echo "nsenter $@ sh -c" > "${__enter}"
}
# context_setup_guest() - Create a new context for running commands in a guest
@@ -47,10 +47,11 @@ context_setup_nsenter() {
context_setup_guest() {
__name="$1"
__cid="$2"
- __prefix="${LOGDIR}/context_${__name}"
+ __enter="${STATESETUP}/context_${__name}.enter"
+ __ssh="${STATESETUP}/context_${__name}.ssh"
context_setup_common "${__name}"
- cat > "${__prefix}.ssh" <<EOF
+ cat > "${__ssh}" <<EOF
Host ${__name}
User root
UserKnownHostsFile ${__prefix}.hosts
@@ -59,10 +60,10 @@ Host ${__name}
IdentityAgent none
ProxyCommand socat - VSOCK-CONNECT:${__cid}:22
EOF
- echo "ssh -F ${__prefix}.ssh ${__name}" > "${__prefix}.enter"
+ echo "ssh -F ${__ssh} ${__name}" > "${__enter}"
# Wait for the guest to be booted and accepting connections
- while ! ssh -F "${__prefix}.ssh" "${__name}" :; do
+ while ! ssh -F "${__ssh}" "${__name}" :; do
sleep 0.1
done
}
@@ -71,7 +72,7 @@ EOF
# $1: Context name
context_teardown() {
__name="$1"
- __prefix="${LOGDIR}/context_${__name}"
+ __prefix="${STATESETUP}/context_${__name}"
rm -f "${__prefix}.enter" "${__prefix}.ssh"
"${__prefix}.hosts"
}
@@ -79,8 +80,8 @@ context_teardown() {
# $1: Context name
context_exists() {
__name="$1"
- __prefix="${LOGDIR}/context_${__name}"
- [ -f "${__prefix}.enter" ]
+ __enter="${STATESETUP}/context_${__name}.enter"
+ [ -f "${__enter}" ]
}
# context_run() - Run a shell command in a context, and wait for it to finish
@@ -88,18 +89,20 @@ context_exists() {
# $*: Command to start
context_run() {
__name="$1"
- __prefix="${LOGDIR}/context_${__name}"
- __enter="$(cat "${__prefix}.enter")"
+ __log="${LOGDIR}/context_${__name}.log"
+ __enter="${STATESETUP}/context_${__name}.enter"
+ __stdout="${STATESETUP}/context_${__name}.stdout"
+ __stderr="${STATESETUP}/context_${__name}.stderr"
shift
- echo "$*" >> "${__prefix}.log"
- mkfifo "${__prefix}.stdout" "${__prefix}.stderr"
- tee -a "${__prefix}.log" < "${__prefix}.stdout" &
- tee -a "${__prefix}.log" < "${__prefix}.stderr" >&2 &
- ${__enter} "$*" >> "${__prefix}.stdout" 2>>
"${__prefix}.stderr"
+ echo "$*" >> "${__log}"
+ mkfifo "${__stdout}" "${__stderr}"
+ tee -a "${__log}" < "${__stdout}" &
+ tee -a "${__log}" < "${__stderr}" >&2 &
+ $(cat ${__enter}) "$*" >> "${__stdout}" 2>>
"${__stderr}"
rc=$?
- rm "${__prefix}.stdout" "${__prefix}.stderr"
- [ ${DEBUG} -eq 1 ] && echo "[Exit code: $rc]" >>
"${__prefix}.log"
- echo -n "${__name}$ " >> "${__prefix}.log"
+ rm "${__stdout}" "${__stderr}"
+ [ ${DEBUG} -eq 1 ] && echo "[Exit code: $rc]" >>
"${__log}"
+ echo -n "${__name}$ " >> "${__log}"
return $rc
}
@@ -108,9 +111,9 @@ context_run() {
# $*: Command to start
context_run_bg() {
__name="$1"
- __prefix="${LOGDIR}/context_${__name}"
+ __pidfile="${STATESETUP}/context_${__name}.pid"
context_run "$@" &
- echo $! > "${__prefix}.pid"
+ echo $! > "${__pidfile}"
}
# context_wait() - Wait for background command in a context to complete
@@ -118,8 +121,8 @@ context_run_bg() {
# Returns the status of the completed command
context_wait() {
__name="$1"
- __prefix="${LOGDIR}/context_${__name}"
- __pid=$(cat "${__prefix}.pid")
- rm "${__prefix}.pid"
+ __pidfile="${STATESETUP}/context_${__name}.pid"
+ __pid=$(cat "${__pidfile}")
+ rm "${__pidfile}"
wait ${__pid}
}
--
2.37.3
In what looks like a copy/paste error, pasta/tcp generates its small test file twice. Signed-off-by: David Gibson <david(a)gibson.dropbear.id.au> --- test/pasta/tcp | 3 --- 1 file changed, 3 deletions(-) diff --git a/test/pasta/tcp b/test/pasta/tcp index 7c7de06..5497f11 100644 --- a/test/pasta/tcp +++ b/test/pasta/tcp @@ -91,10 +91,7 @@ hout HOST_MD5_BIG md5sum __TEMP_BIG__ | cut -d' ' -f1 check [ "__HOST_MD5_BIG__" = "__MD5_BIG__" ] test TCP/IPv6: host to ns: small transfer -temp TEMP_SMALL -temp TEMP_NS_SMALL nsb socat -u TCP6-LISTEN:10002,bind=[::1] OPEN:__TEMP_NS_SMALL__,create,trunc -host dd if=/dev/urandom bs=2k count=1 of=__TEMP_SMALL__ host socat -u OPEN:__TEMP_SMALL__ TCP6:[::1]:10002 nsw hout MD5_SMALL md5sum __TEMP_SMALL__ | cut -d' ' -f1 -- 2.37.3
Instead of using the 'temp' and 'tempdir' DSL directives to create
temporary files, use fixed paths relative to __STATEDIR__. This has two
advantages:
1) The files are automatically cleaned up if the tests fail (and even if
that doesn't work they're easier to clean up manuall)
2) When debugging tests it's easier to figure out which of the temporary
files are relevant to whatever's going wrong
Signed-off-by: David Gibson <david(a)gibson.dropbear.id.au>
---
test/build/all | 31 +++++++++++++++----------------
test/demo/passt | 9 ++++-----
test/demo/pasta | 12 +++++-------
test/demo/podman | 11 +++++------
test/distro/debian | 2 +-
test/distro/fedora | 2 +-
test/distro/opensuse | 16 +++++++++-------
test/distro/ubuntu | 8 ++++----
test/lib/test | 10 ----------
test/passt/tcp | 4 ++--
test/passt/udp | 6 +++---
test/passt_in_ns/tcp | 8 ++++----
test/passt_in_ns/udp | 6 +++---
test/pasta/tcp | 8 ++++----
test/pasta/udp | 18 +++++++++---------
15 files changed, 69 insertions(+), 82 deletions(-)
diff --git a/test/build/all b/test/build/all
index 1a89b77..bacb1d1 100644
--- a/test/build/all
+++ b/test/build/all
@@ -41,22 +41,21 @@ check [ -f passt ]
check [ -h pasta ]
check [ -f qrap ]
-tempdir TEMP
-
test Install
-host prefix=__TEMP__ make install
-check [ -f __TEMP__/bin/passt ]
-check [ -h __TEMP__/bin/pasta ]
-check [ -f __TEMP__/bin/qrap ]
-check man -M __TEMP__/share/man -W passt
-check man -M __TEMP__/share/man -W pasta
-check man -M __TEMP__/share/man -W qrap
+host mkdir __STATEDIR__/prefix
+host prefix=__STATEDIR__/prefix make install
+check [ -f __STATEDIR__/prefix/bin/passt ]
+check [ -h __STATEDIR__/prefix/bin/pasta ]
+check [ -f __STATEDIR__/prefix/bin/qrap ]
+check man -M __STATEDIR__/prefix/share/man -W passt
+check man -M __STATEDIR__/prefix/share/man -W pasta
+check man -M __STATEDIR__/prefix/share/man -W qrap
test Uninstall
-host prefix=__TEMP__ make uninstall
-check ! [ -f __TEMP__/bin/passt ]
-check ! [ -h __TEMP__/bin/pasta ]
-check ! [ -f __TEMP__/bin/qrap ]
-check ! man -M __TEMP__/share/man -W passt 2>/dev/null
-check ! man -M __TEMP__/share/man -W pasta 2>/dev/null
-check ! man -M __TEMP__/share/man -W qrap 2>/dev/null
+host prefix=__STATEDIR__/prefix make uninstall
+check ! [ -f __STATEDIR__/prefix/bin/passt ]
+check ! [ -h __STATEDIR__/prefix/bin/pasta ]
+check ! [ -f __STATEDIR__/prefix/bin/qrap ]
+check ! man -M __STATEDIR__/prefix/share/man -W passt 2>/dev/null
+check ! man -M __STATEDIR__/prefix/share/man -W pasta 2>/dev/null
+check ! man -M __STATEDIR__/prefix/share/man -W qrap 2>/dev/null
diff --git a/test/demo/passt b/test/demo/passt
index 673afd9..dd6a119 100644
--- a/test/demo/passt
+++ b/test/demo/passt
@@ -20,8 +20,7 @@ sleep 3
say Let's fetch the source
sleep 1
-tempdir TEMPDIR
-host cd __TEMPDIR__
+host cd __STATEDIR__
host git clone git://passt.top/passt
sleep 1
@@ -52,10 +51,10 @@ host q
nl
nl
say Let's create a small initramfs image for the guest.
-guest cd __TEMPDIR__
+guest cd __STATEDIR__
guest git clone git://mbuto.sh/mbuto
guest cd mbuto
-guest ./mbuto -f passt.img -p __TEMPDIR__/passt/test/passt.mbuto -c lz4
+guest ./mbuto -f passt.img -p __STATEDIR__/passt/test/passt.mbuto -c lz4
sleep 2
nl
@@ -69,7 +68,7 @@ nl
say 'pasta' demo above.
sleep 3
-passt cd __TEMPDIR__/passt
+passt cd __STATEDIR__/passt
passtb ./pasta -P /tmp/pasta.pid
sleep 3
passt /sbin/dhclient -4 --no-pid
diff --git a/test/demo/pasta b/test/demo/pasta
index 393149e..22479f8 100644
--- a/test/demo/pasta
+++ b/test/demo/pasta
@@ -20,8 +20,7 @@ sleep 3
say Let's fetch the source
sleep 1
-tempdir TEMPDIR
-host cd __TEMPDIR__
+host cd __STATEDIR__
host git clone git://passt.top/passt
sleep 1
@@ -47,7 +46,7 @@ sleep 10
nl
say without PID, it will create a namespace.
sleep 3
-passt cd __TEMPDIR__/passt
+passt cd __STATEDIR__/passt
passtb ./pasta -P /tmp/pasta.pid
sleep 3
@@ -140,13 +139,12 @@ say can also take packet captures.
sleep 3
passt exit
sleep 2
-temp TEMP
-passtb ./pasta -p __TEMP__.pcap
+passtb ./pasta -p __STATEDIR__/demo_pasta.pcap
sleep 2
passt
passt /sbin/dhclient -4 --no-pid
sleep 2
-hostb tshark -r __TEMP__.pcap
+hostb tshark -r __STATEDIR__/demo_pasta.pcap
sleep 5
nl
@@ -257,7 +255,7 @@ sleep 2
killp PASST
killp HOST
sleep 2
-ns cd __TEMPDIR__/passt
+ns cd __STATEDIR__/passt
nsb perf report -g --max-stack 3
sleep 10
diff --git a/test/demo/podman b/test/demo/podman
index f3411d8..a83a04f 100644
--- a/test/demo/podman
+++ b/test/demo/podman
@@ -24,14 +24,13 @@ sleep 3
say Let's fetch Podman
sleep 1
-tempdir TEMPDIR
-host git -C __TEMPDIR__ clone https://github.com/containers/podman.git
+host git -C __STATEDIR__ clone https://github.com/containers/podman.git
sleep 1
say , patch it
sleep 1
-host cp ../contrib/podman/0001-libpod-Add-pasta-networking-mode.patch __TEMPDIR__/podman
-host cd __TEMPDIR__/podman
+host cp ../contrib/podman/0001-libpod-Add-pasta-networking-mode.patch
__STATEDIR__/podman
+host cd __STATEDIR__/podman
host git am -3 0001-libpod-Add-pasta-networking-mode.patch
sleep 1
@@ -54,7 +53,7 @@ nl
say Let's start a container with it
sleep 1
-ns1 cd __TEMPDIR__/podman
+ns1 cd __STATEDIR__/podman
ns1b ./bin/podman run --rm -ti alpine sh
sleep 2
@@ -64,7 +63,7 @@ say and one with
em pasta
say instead.
-ns2 cd __TEMPDIR__/podman
+ns2 cd __STATEDIR__/podman
ns2b ./bin/podman run --net=pasta --rm -ti alpine sh
sleep 2
diff --git a/test/distro/debian b/test/distro/debian
index 83fb32d..4a19f95 100644
--- a/test/distro/debian
+++ b/test/distro/debian
@@ -11,7 +11,7 @@
# Copyright (c) 2021 Red Hat GmbH
# Author: Stefano Brivio <sbrivio(a)redhat.com>
-temp PIDFILE
+set PIDFILE __STATEDIR__/passt.pid
htools cat kill qemu-system-x86_64 qemu-system-aarch64 qemu-system-ppc64
# Quick pasta test: send message from init to ns, and from ns to init
diff --git a/test/distro/fedora b/test/distro/fedora
index daad6a4..a8d3b51 100644
--- a/test/distro/fedora
+++ b/test/distro/fedora
@@ -11,7 +11,7 @@
# Copyright (c) 2021 Red Hat GmbH
# Author: Stefano Brivio <sbrivio(a)redhat.com>
-temp PIDFILE
+set PIDFILE __STATEDIR__/passt.pid
htools cat kill qemu-system-x86_64
# Quick pasta test: send message from init to ns, and from ns to init
diff --git a/test/distro/opensuse b/test/distro/opensuse
index d48deb7..314870f 100644
--- a/test/distro/opensuse
+++ b/test/distro/opensuse
@@ -11,7 +11,7 @@
# Copyright (c) 2021 Red Hat GmbH
# Author: Stefano Brivio <sbrivio(a)redhat.com>
-temp PIDFILE
+set PIDFILE __STATEDIR__/passt.pid
htools qemu-img virt-edit guestfish head sed cat kill qemu-system-x86_64
qemu-system-aarch64 xzcat tr
# Quick pasta test: send message from init to ns, and from ns to init
@@ -44,7 +44,7 @@ hout GUEST_FILES ls -1 *.c *.h *.sh passt.1 qrap.1 Makefile README.md |
tr '\n'
test OpenSUSE Leap 15.1
-temp IMG
+set IMG __STATEDIR__/opensuse-15.1-x86_64.img
host qemu-img create -f qcow2 -F qcow2 -b
__BASEPATH__/openSUSE-Leap-15.1-JeOS.x86_64-kvm-and-xen.qcow2 __IMG__
host guestfish --rw -a __IMG__ -i rm
'/usr/lib/systemd/system/systemd-journald.service'
host guestfish --rw -a __IMG__ -i rm
/etc/systemd/system/default.target.wants/jeos-firstboot.service
@@ -73,6 +73,7 @@ hout PID cat __PIDFILE__
test OpenSUSE Leap 15.2
+set IMG __STATEDIR__/opensuse-15.2-x86_64.img
host qemu-img create -f qcow2 -F qcow2 -b
__BASEPATH__/openSUSE-Leap-15.2-JeOS.x86_64-kvm-and-xen.qcow2 __IMG__
host guestfish --rw -a __IMG__ -i rm
'/usr/lib/systemd/system/systemd-journald.service'
host guestfish --rw -a __IMG__ -i rm
/etc/systemd/system/default.target.wants/jeos-firstboot.service
@@ -98,6 +99,7 @@ sleep 1
test OpenSUSE Leap 15.3
+set IMG __STATEDIR__/opensuse-15.3-x86_64.img
host qemu-img create -f qcow2 -F qcow2 -b
__BASEPATH__/openSUSE-Leap-15.3-JeOS.x86_64-kvm-and-xen.qcow2 __IMG__
host guestfish --rw -a __IMG__ -i rm
'/usr/lib/systemd/system/systemd-journald.service'
host guestfish --rw -a __IMG__ -i rm
/etc/systemd/system/default.target.wants/jeos-firstboot.service
@@ -125,7 +127,7 @@ sleep 1
test OpenSUSE Tumbleweed aarch64
-temp IMG
+set IMG __STATEDIR__/opensuse-tumbleweed-aarch64.img
host xzcat __BASEPATH__/openSUSE-Tumbleweed-ARM-JeOS-efi.aarch64.raw.xz > __IMG__
host virt-edit -a __IMG__ -m /dev/sda3 /usr/lib/systemd/system/serial-getty@.service -e
's/ExecStart=.*/ExecStart=\/sbin\/agetty --timeout 5000 --autologin root -i -8
--keep-baud 115200,38400,9600 %I $TERM/g'
host guestfish --rw -a __IMG__ -i copy-in __GUEST_FILES__ /root/
@@ -150,9 +152,9 @@ sleep 1
test OpenSUSE Tumbleweed armv7l
-temp IMG
-temp ZIMAGE
-temp INITRD
+set IMG __STATEDIR__/opensuse-tumbleweed-armv7l.img
+set ZIMAGE __STATEDIR__/opensuse-tumbleweed-armv7l.zimage
+set INITRD __STATEDIR__/opensuse-tumbleweed-armv7l.initrd
host xzcat __BASEPATH__/openSUSE-Tumbleweed-ARM-JeOS-efi.armv7l.raw.xz > __IMG__
host guestfish -a __IMG__ -i download /boot/zImage __ZIMAGE__
host guestfish -a __IMG__ -i download /boot/initrd __INITRD__
@@ -178,7 +180,7 @@ sleep 1
test OpenSUSE Tumbleweed
-temp IMG
+set IMG __STATEDIR__/opensuse-tumbleweed-x86_64.img
host qemu-img create -f qcow2 -F qcow2 -b
__BASEPATH__/openSUSE-Tumbleweed-JeOS.x86_64-kvm-and-xen.qcow2 __IMG__
host guestfish --rw -a __IMG__ -i rm /usr/lib/systemd/system/systemd-journald.service
host guestfish --rw -a __IMG__ -i rm
/etc/systemd/system/default.target.wants/jeos-firstboot.service
diff --git a/test/distro/ubuntu b/test/distro/ubuntu
index 6666f38..72d2bea 100644
--- a/test/distro/ubuntu
+++ b/test/distro/ubuntu
@@ -11,7 +11,7 @@
# Copyright (c) 2021 Red Hat GmbH
# Author: Stefano Brivio <sbrivio(a)redhat.com>
-temp PIDFILE
+set PIDFILE __STATEDIR__/passt.pid
htools qemu-img virt-edit guestfish cat kill qemu-system-x86_64 qemu-system-ppc64
qemu-system-s390x
# Quick pasta test: send message from init to ns, and from ns to init
@@ -63,7 +63,7 @@ hout GUEST_FILES ls -1 *.c *.h *.sh passt.1 qrap.1 Makefile README.md |
tr '\n'
test Ubuntu 14.04.5 LTS (Trusty Tahr), amd64
-temp IMG
+set IMG __STATEDIR__/ubuntu-14.04-amd64.img
host qemu-img create -f qcow2 -F qcow2 -b
__BASEPATH__/trusty-server-cloudimg-amd64-disk1.img __IMG__
host virt-edit -a __IMG__ /etc/init/ttyS0.conf -e 's/\/getty/\/getty --autologin
root/'
host guestfish --rw -a __IMG__ -i rm /etc/init/cloud-config.conf
@@ -96,7 +96,7 @@ hout PID cat __PIDFILE__
test Ubuntu 14.04.5 LTS (Trusty Tahr), i386
-temp IMG
+set IMG __STATEDIR__/ubuntu-14.04-i386.img
host qemu-img create -f qcow2 -F qcow2 -b
__BASEPATH__/trusty-server-cloudimg-i386-disk1.img __IMG__
host virt-edit -a __IMG__ /etc/init/ttyS0.conf -e 's/\/getty/\/getty --autologin
root/'
host guestfish --rw -a __IMG__ -i rm /etc/init/cloud-config.conf
@@ -126,7 +126,7 @@ sleep 1
test Ubuntu 14.04.5 LTS (Trusty Tahr), ppc64le
-temp IMG
+set IMG __STATEDIR__/ubuntu-14.04-ppc64le.img
host qemu-img create -f qcow2 -F qcow2 -b
__BASEPATH__/trusty-server-cloudimg-ppc64el-disk1.img __IMG__
host virt-edit -a __IMG__ /etc/init/hvc0.conf -e 's/\/getty/\/getty --autologin
root/'
host guestfish --rw -a __IMG__ -i rm /etc/init/cloud-config.conf
diff --git a/test/lib/test b/test/lib/test
index 052ebf0..6db1b35 100755
--- a/test/lib/test
+++ b/test/lib/test
@@ -98,16 +98,6 @@ test_one_line() {
IFS= eval TEST_ONE_DEF_$TEST_ONE_in_def=
IFS="${__ifs}"
;;
- "tempdir")
- __tmpdir="$(mktemp -d)"
- TEST_ONE_subs="$(list_add_pair "${TEST_ONE_subs}"
"__${__arg}__" "${__tmpdir}")"
- TEST_ONE_dirclean="$(list_add "${TEST_ONE_dirclean}"
"${__tmpdir}")"
- ;;
- "temp")
- __tmpfile="$(mktemp)"
- TEST_ONE_subs="$(list_add_pair "${TEST_ONE_subs}"
"__${__arg}__" "${__tmpfile}")"
- TEST_ONE_dirclean="$(list_add "${TEST_ONE_dirclean}"
"${__tmpfile}")"
- ;;
"test")
[ ${TEST_ONE_perf_nok} -eq 0 ] || TEST_ONE_nok=1
[ ${TEST_ONE_nok} -eq 1 ] && status_test_fail
diff --git a/test/passt/tcp b/test/passt/tcp
index d5c8164..7af9c54 100644
--- a/test/passt/tcp
+++ b/test/passt/tcp
@@ -15,7 +15,7 @@ gtools socat ip jq md5sum cut
htools dd socat ip jq md5sum cut
test TCP/IPv4: host to guest: big transfer
-temp TEMP_BIG
+set TEMP_BIG __STATEDIR__/big
guestb socat -u TCP4-LISTEN:10001,reuseaddr OPEN:test_big.bin,create,trunc
sleep 1
host dd if=/dev/urandom bs=1M count=10 > __TEMP_BIG__
@@ -34,7 +34,7 @@ hout HOST_MD5_BIG md5sum __TEMP_BIG__ | cut -d' ' -f1
check [ "__GUEST_MD5_BIG__" = "__HOST_MD5_BIG__" ]
test TCP/IPv4: host to guest: small transfer
-temp TEMP_SMALL
+set TEMP_SMALL __STATEDIR__/small
guestb socat -u TCP4-LISTEN:10001,reuseaddr OPEN:test_small.bin,create,trunc
sleep 1
host dd if=/dev/urandom bs=2k count=1 > __TEMP_SMALL__
diff --git a/test/passt/udp b/test/passt/udp
index 56d01b3..0253a86 100644
--- a/test/passt/udp
+++ b/test/passt/udp
@@ -15,9 +15,9 @@ gtools socat tee grep cat ip jq md5sum cut
htools printf dd socat tee grep cat ip jq md5sum cut
test UDP/IPv4: host to guest
-temp TEMP
-temp SC_PID
-guestb (socat -u UDP4-LISTEN:10001 STDOUT & echo $! > __SC_PID__) | tee test.bin |
(grep -qm1 "END_OF_TEST" && kill $(cat __SC_PID__))
+set TEMP __STATEDIR__/data
+set SC_PID __STATEDIR__/socat.pid
+guestb (socat -u UDP4-LISTEN:10001 STDOUT & echo $! > sc.pid) | tee test.bin |
(grep -qm1 "END_OF_TEST" && kill $(cat sc.pid))
sleep 1
host dd if=/dev/urandom bs=1k count=5 > __TEMP__ && printf
"\nEND_OF_TEST\n" >> __TEMP__
host socat -u OPEN:__TEMP__ UDP4:127.0.0.1:10001
diff --git a/test/passt_in_ns/tcp b/test/passt_in_ns/tcp
index 5ec95e8..a2cb667 100644
--- a/test/passt_in_ns/tcp
+++ b/test/passt_in_ns/tcp
@@ -16,7 +16,7 @@ htools dd socat ip jq md5sum cut
nstools socat ip jq md5sum cut
test TCP/IPv4: host to guest: big transfer
-temp TEMP_BIG
+set TEMP_BIG __STATEDIR__/big.img
guestb socat -u TCP4-LISTEN:10001 OPEN:test_big.bin,create,trunc
sleep 1
host dd if=/dev/urandom bs=1M count=10 of=__TEMP_BIG__
@@ -27,7 +27,7 @@ gout GUEST_MD5_BIG md5sum test_big.bin | cut -d' ' -f1
check [ "__GUEST_MD5_BIG__" = "__MD5_BIG__" ]
test TCP/IPv4: host to ns: big transfer
-temp TEMP_NS_BIG
+set TEMP_NS_BIG __STATEDIR__/big_ns.img
nsb socat -u TCP4-LISTEN:10002 OPEN:__TEMP_NS_BIG__,create,trunc
host socat -u OPEN:__TEMP_BIG__ TCP4:127.0.0.1:10002
nsw
@@ -82,7 +82,7 @@ gout GUEST_MD5_BIG md5sum test_big.bin | cut -d' ' -f1
check [ "__GUEST_MD5_BIG__" = "__MD5_BIG__" ]
test TCP/IPv4: host to guest: small transfer
-temp TEMP_SMALL
+set TEMP_SMALL __STATEDIR__/small.img
guestb socat -u TCP4-LISTEN:10001 OPEN:test_small.bin,create,trunc
sleep 1
host dd if=/dev/urandom bs=2k count=100 of=__TEMP_SMALL__
@@ -93,7 +93,7 @@ gout GUEST_MD5_SMALL md5sum test_small.bin | cut -d' ' -f1
check [ "__GUEST_MD5_SMALL__" = "__MD5_SMALL__" ]
test TCP/IPv4: host to ns: small transfer
-temp TEMP_NS_SMALL
+set TEMP_NS_SMALL __STATEDIR__/small_ns.img
nsb socat -u TCP4-LISTEN:10002 OPEN:__TEMP_NS_SMALL__,create,trunc
host socat -u OPEN:__TEMP_SMALL__ TCP4:127.0.0.1:10002
nsw
diff --git a/test/passt_in_ns/udp b/test/passt_in_ns/udp
index c22a68f..3b1e521 100644
--- a/test/passt_in_ns/udp
+++ b/test/passt_in_ns/udp
@@ -16,8 +16,8 @@ nstools socat tee grep cat ip jq md5sum cut
htools printf dd socat tee grep cat ip jq md5sum cut
test UDP/IPv4: host to guest
-temp TEMP
-temp SC_PID
+set TEMP __STATEDIR__/data
+set SC_PID __STATEDIR__/socat.pid
guestb (socat -u UDP4-LISTEN:10001 STDOUT & echo $! > sc.pid) | tee test.bin |
(grep -qm1 "END_OF_TEST" && kill $(cat sc.pid))
sleep 1
host dd if=/dev/urandom bs=1k count=5 > __TEMP__ && printf
"\nEND_OF_TEST\n" >> __TEMP__
@@ -28,7 +28,7 @@ gout GUEST_MD5 md5sum test.bin | cut -d' ' -f1
check [ "__GUEST_MD5__" = "__MD5__" ]
test UDP/IPv4: host to ns
-temp TEMP_NS
+set TEMP_NS __STATEDIR__/data_ns
nsb (socat -u UDP4-LISTEN:10002 STDOUT & echo $! > __SC_PID__) | tee __TEMP_NS__ |
(grep -qm1 "END_OF_TEST" && kill $(cat __SC_PID__))
host socat -u OPEN:__TEMP__ UDP4:127.0.0.1:10002
nsw
diff --git a/test/pasta/tcp b/test/pasta/tcp
index 5497f11..d37e21c 100644
--- a/test/pasta/tcp
+++ b/test/pasta/tcp
@@ -15,8 +15,8 @@ htools dd socat ip jq md5sum cut
nstools socat ip jq md5sum cut
test TCP/IPv4: host to ns: big transfer
-temp TEMP_BIG
-temp TEMP_NS_BIG
+set TEMP_BIG __STATEDIR__/big
+set TEMP_NS_BIG __STATEDIR__/big_ns
nsb socat -u TCP4-LISTEN:10002,bind=127.0.0.1 OPEN:__TEMP_NS_BIG__,create,trunc
host dd if=/dev/urandom bs=1M count=10 of=__TEMP_BIG__
host socat -u OPEN:__TEMP_BIG__ TCP4:127.0.0.1:10002
@@ -41,8 +41,8 @@ hout HOST_MD5_BIG md5sum __TEMP_BIG__ | cut -d' ' -f1
check [ "__HOST_MD5_BIG__" = "__MD5_BIG__" ]
test TCP/IPv4: host to ns: small transfer
-temp TEMP_SMALL
-temp TEMP_NS_SMALL
+set TEMP_SMALL __STATEDIR__/small
+set TEMP_NS_SMALL __STATEDIR__/small_ns
nsb socat -u TCP4-LISTEN:10002,bind=127.0.0.1 OPEN:__TEMP_NS_SMALL__,create,trunc
host dd if=/dev/urandom bs=2k count=1 of=__TEMP_SMALL__
host socat OPEN:__TEMP_SMALL__ TCP4:127.0.0.1:10002
diff --git a/test/pasta/udp b/test/pasta/udp
index 0e58152..74148e3 100644
--- a/test/pasta/udp
+++ b/test/pasta/udp
@@ -15,10 +15,10 @@ nstools socat tee grep cat ip jq md5sum cut
htools printf dd socat tee grep cat ip jq md5sum cut
test UDP/IPv4: host to ns
-temp TEMP
-temp TEMP_NS
-temp NC_PID
-nsb (socat -u UDP4-LISTEN:10002,bind=127.0.0.1 STDOUT & echo $! > __NC_PID__) |
tee __TEMP_NS__ | (grep -qm1 "END_OF_TEST" && kill $(cat __NC_PID__))
+set TEMP __STATEDIR__/data
+set TEMP_NS __STATEDIR__/data_ns
+set SC_PID __STATEDIR__/socat.pid
+nsb (socat -u UDP4-LISTEN:10002,bind=127.0.0.1 STDOUT & echo $! > __SC_PID__) |
tee __TEMP_NS__ | (grep -qm1 "END_OF_TEST" && kill $(cat __SC_PID__))
host dd if=/dev/urandom bs=1k count=5 > __TEMP__ && printf
"\nEND_OF_TEST\n" >> __TEMP__
host socat OPEN:__TEMP__ UDP4:127.0.0.1:10002
@@ -28,7 +28,7 @@ nsout NS_MD5 md5sum __TEMP_NS__ | cut -d' ' -f1
check [ "__NS_MD5__" = "__MD5__" ]
test UDP/IPv4: ns to host (recvmmsg/sendmmsg)
-hostb (socat -u UDP4-LISTEN:10003,bind=127.0.0.1 STDOUT & echo $! > __NC_PID__) |
tee __TEMP__ | (grep -qm1 "END_OF_TEST" && kill $(cat __NC_PID__))
+hostb (socat -u UDP4-LISTEN:10003,bind=127.0.0.1 STDOUT & echo $! > __SC_PID__) |
tee __TEMP__ | (grep -qm1 "END_OF_TEST" && kill $(cat __SC_PID__))
sleep 1
ns socat OPEN:__TEMP_NS__ UDP4:127.0.0.1:10003
hostw
@@ -36,7 +36,7 @@ hout HOST_MD5 md5sum __TEMP__ | cut -d' ' -f1
check [ "__HOST_MD5__" = "__MD5__" ]
test UDP/IPv4: ns to host (via tap)
-hostb (socat -u UDP4-LISTEN:10003 STDOUT & echo $! > __NC_PID__) | tee __TEMP__ |
(grep -qm1 "END_OF_TEST" && kill $(cat __NC_PID__))
+hostb (socat -u UDP4-LISTEN:10003 STDOUT & echo $! > __SC_PID__) | tee __TEMP__ |
(grep -qm1 "END_OF_TEST" && kill $(cat __SC_PID__))
nsout GW ip -j -4 route show|jq -rM '.[] | select(.dst ==
"default").gateway'
ns socat -u OPEN:__TEMP_NS__ UDP4:__GW__:10003
hostw
@@ -44,7 +44,7 @@ hout HOST_MD5 md5sum __TEMP__ | cut -d' ' -f1
check [ "__HOST_MD5__" = "__MD5__" ]
test UDP/IPv6: host to ns
-nsb (socat -u UDP6-LISTEN:10002,bind=[::1] STDOUT & echo $! > __NC_PID__) | tee
__TEMP_NS__ | (grep -qm1 "END_OF_TEST" && kill $(cat __NC_PID__))
+nsb (socat -u UDP6-LISTEN:10002,bind=[::1] STDOUT & echo $! > __SC_PID__) | tee
__TEMP_NS__ | (grep -qm1 "END_OF_TEST" && kill $(cat __SC_PID__))
host socat -u OPEN:__TEMP__ UDP6:[::1]:10002
nsw
hout MD5 md5sum __TEMP__ | cut -d' ' -f1
@@ -52,7 +52,7 @@ nsout NS_MD5 md5sum __TEMP_NS__ | cut -d' ' -f1
check [ "__NS_MD5__" = "__MD5__" ]
test UDP/IPv6: ns to host (recvmmsg/sendmmsg)
-hostb (socat -u UDP6-LISTEN:10003,bind=[::1] STDOUT & echo $! > __NC_PID__) | tee
__TEMP__ | (grep -qm1 "END_OF_TEST" && kill $(cat __NC_PID__))
+hostb (socat -u UDP6-LISTEN:10003,bind=[::1] STDOUT & echo $! > __SC_PID__) | tee
__TEMP__ | (grep -qm1 "END_OF_TEST" && kill $(cat __SC_PID__))
sleep 1
ns socat -u OPEN:__TEMP_NS__ UDP6:[::1]:10003
hostw
@@ -60,7 +60,7 @@ hout HOST_MD5 md5sum __TEMP__ | cut -d' ' -f1
check [ "__HOST_MD5__" = "__MD5__" ]
test UDP/IPv6: ns to host (via tap)
-hostb (socat -u UDP6-LISTEN:10003 STDOUT & echo $! > __NC_PID__) | tee __TEMP__ |
(grep -qm1 "END_OF_TEST" && kill $(cat __NC_PID__))
+hostb (socat -u UDP6-LISTEN:10003 STDOUT & echo $! > __SC_PID__) | tee __TEMP__ |
(grep -qm1 "END_OF_TEST" && kill $(cat __SC_PID__))
nsout GW6 ip -j -6 route show|jq -rM '.[] | select(.dst ==
"default").gateway'
nsout IFNAME ip -j link show | jq -rM '.[] | select(.link_type ==
"ether").ifname'
ns socat -u OPEN:__TEMP_NS__ UDP6:[__GW6__%__IFNAME__]:10003
--
2.37.3
Signed-off-by: David Gibson <david(a)gibson.dropbear.id.au>
---
test/lib/term | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/test/lib/term b/test/lib/term
index 2321664..d6869c7 100755
--- a/test/lib/term
+++ b/test/lib/term
@@ -599,8 +599,8 @@ pause_continue() {
info_nolog "${1}"
info_nolog_n "${2}"
- __pause_tmp="$(mktemp)"
- echo >> "${__pause_tmp}"
+ __pause_tmp="${STATEBASE}/pause.tmp"
+ echo > "${__pause_tmp}"
tmux pipe-pane -O -t ${PANE_INFO} "cat >> ${__pause_tmp}"
__pane_buf=
__wait=0
--
2.37.3
The capture files are more or less a different form of log output from the
tests, so place them in $LOGDIR.
Signed-off-by: David Gibson <david(a)gibson.dropbear.id.au>
---
test/lib/setup | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/test/lib/setup b/test/lib/setup
index b0420fb..87eb05a 100755
--- a/test/lib/setup
+++ b/test/lib/setup
@@ -47,7 +47,7 @@ setup_passt() {
# 10003 | as server
__opts=
- [ ${PCAP} -eq 1 ] && __opts="${__opts} -p /tmp/passt.pcap"
+ [ ${PCAP} -eq 1 ] && __opts="${__opts} -p ${LOGDIR}/passt.pcap"
[ ${DEBUG} -eq 1 ] && __opts="${__opts} -d"
[ ${TRACE} -eq 1 ] && __opts="${__opts} --trace"
@@ -94,7 +94,7 @@ setup_pasta() {
# 10003 spliced to init | as server
__opts=
- [ ${PCAP} -eq 1 ] && __opts="${__opts} -p /tmp/pasta.pcap"
+ [ ${PCAP} -eq 1 ] && __opts="${__opts} -p ${LOGDIR}/pasta.pcap"
[ ${DEBUG} -eq 1 ] && __opts="${__opts} -d"
[ ${TRACE} -eq 1 ] && __opts="${__opts} --trace"
@@ -124,7 +124,7 @@ setup_passt_in_ns() {
# 10031 as server | forwarded to guest |
__opts=
- [ ${PCAP} -eq 1 ] && __opts="${__opts} -p /tmp/pasta_with_passt.pcap"
+ [ ${PCAP} -eq 1 ] && __opts="${__opts} -p
${LOGDIR}/pasta_with_passt.pcap"
[ ${DEBUG} -eq 1 ] && __opts="${__opts} -d"
[ ${TRACE} -eq 1 ] && __opts="${__opts} --trace"
@@ -142,7 +142,7 @@ setup_passt_in_ns() {
context_run ns "/sbin/dhclient -6 --no-pid ${__ifname}"
__opts=
- [ ${PCAP} -eq 1 ] && __opts="${__opts} -p /tmp/passt_in_pasta.pcap"
+ [ ${PCAP} -eq 1 ] && __opts="${__opts} -p
${LOGDIR}/passt_in_pasta.pcap"
[ ${DEBUG} -eq 1 ] && __opts="${__opts} -d"
[ ${TRACE} -eq 1 ] && __opts="${__opts} --trace"
@@ -194,7 +194,7 @@ setup_two_guests() {
# 10005 | | | as server | to ns #2
__opts=
- [ ${PCAP} -eq 1 ] && __opts="${__opts} -p /tmp/pasta_1.pcap"
+ [ ${PCAP} -eq 1 ] && __opts="${__opts} -p ${LOGDIR}/pasta_1.pcap"
[ ${DEBUG} -eq 1 ] && __opts="${__opts} -d"
[ ${TRACE} -eq 1 ] && __opts="${__opts} --trace"
context_run_bg pasta_1 "./pasta ${__opts} -P pasta_1.pid -t 10001,10002 -T
10003,10004 -u 10001,10002 -U 10003,10004 ${NSHOLDER} ns1.hold hold"
@@ -202,7 +202,7 @@ setup_two_guests() {
context_setup_nsenter passt_1 -U -n -p --preserve-credentials -t ${__ns1_pid}
__opts=
- [ ${PCAP} -eq 1 ] && __opts="${__opts} -p /tmp/pasta_2.pcap"
+ [ ${PCAP} -eq 1 ] && __opts="${__opts} -p ${LOGDIR}/pasta_2.pcap"
[ ${DEBUG} -eq 1 ] && __opts="${__opts} -d"
[ ${TRACE} -eq 1 ] && __opts="${__opts} --trace"
context_run_bg pasta_2 "./pasta ${__opts} -P pasta_2.pid -t 10004,10005 -T
10003,10001 -u 10004,10005 -U 10003,10001 ${NSHOLDER} ns2.hold hold"
@@ -220,7 +220,7 @@ setup_two_guests() {
context_run qemu_2 "/sbin/dhclient -6 --no-pid ${__ifname}"
__opts=
- [ ${PCAP} -eq 1 ] && __opts="${__opts} -p /tmp/passt_1.pcap"
+ [ ${PCAP} -eq 1 ] && __opts="${__opts} -p ${LOGDIR}/passt_1.pcap"
[ ${DEBUG} -eq 1 ] && __opts="${__opts} -d"
[ ${TRACE} -eq 1 ] && __opts="${__opts} --trace"
@@ -228,7 +228,7 @@ setup_two_guests() {
sleep 1
__opts=
- [ ${PCAP} -eq 1 ] && __opts="${__opts} -p /tmp/passt_2.pcap"
+ [ ${PCAP} -eq 1 ] && __opts="${__opts} -p ${LOGDIR}/passt_2.pcap"
[ ${DEBUG} -eq 1 ] && __opts="${__opts} -d"
[ ${TRACE} -eq 1 ] && __opts="${__opts} --trace"
--
2.37.3
Currently they go in the passt source tree with a fixed names, which means
their presence can mess with subsequent test runs.
Signed-off-by: David Gibson <david(a)gibson.dropbear.id.au>
---
test/lib/setup | 66 +++++++++++++++++++--------------------
test/passt/shutdown | 2 +-
test/passt_in_ns/shutdown | 2 +-
3 files changed, 35 insertions(+), 35 deletions(-)
diff --git a/test/lib/setup b/test/lib/setup
index 87eb05a..3fee47e 100755
--- a/test/lib/setup
+++ b/test/lib/setup
@@ -53,7 +53,7 @@ setup_passt() {
context_run passt "make clean"
context_run passt "make valgrind"
- context_run_bg passt "valgrind --max-stackframe=$((4 * 1024 * 1024))
--trace-children=yes --vgdb=no --error-exitcode=1 --suppressions=test/valgrind.supp
./passt ${__opts} -f -t 10001 -u 10001 -P passt.pid"
+ context_run_bg passt "valgrind --max-stackframe=$((4 * 1024 * 1024))
--trace-children=yes --vgdb=no --error-exitcode=1 --suppressions=test/valgrind.supp
./passt ${__opts} -f -t 10001 -u 10001 -P ${STATESETUP}/passt.pid"
sleep 5
GUEST_CID=94557
@@ -67,7 +67,7 @@ setup_passt() {
'virtio-net.napi_tx=1"' \
" -device virtio-net-pci,netdev=hostnet0,x-txburst=16384" \
" -netdev socket,fd=5,id=hostnet0" \
- " -pidfile passt_qemu.pid" \
+ " -pidfile ${STATESETUP}/qemu.pid" \
" -device vhost-vsock-pci,guest-cid=$GUEST_CID"
context_setup_guest guest $GUEST_CID
@@ -81,8 +81,8 @@ setup_pasta() {
layout_pasta
- context_run_bg unshare "unshare -rUnpf ${NSHOLDER} ns.hold hold"
- __target_pid=$(${NSHOLDER} ns.hold pid)
+ context_run_bg unshare "unshare -rUnpf ${NSHOLDER} ${STATESETUP}/ns.hold
hold"
+ __target_pid=$(${NSHOLDER} ${STATESETUP}/ns.hold pid)
context_setup_nsenter ns -U -n -p --preserve-credentials -t ${__target_pid}
@@ -98,7 +98,7 @@ setup_pasta() {
[ ${DEBUG} -eq 1 ] && __opts="${__opts} -d"
[ ${TRACE} -eq 1 ] && __opts="${__opts} --trace"
- context_run_bg passt "./pasta ${__opts} -f -t 10002 -T 10003 -u 10002 -U 10003 -P
passt.pid ${__target_pid}"
+ context_run_bg passt "./pasta ${__opts} -f -t 10002 -T 10003 -u 10002 -U 10003 -P
${STATESETUP}/passt.pid ${__target_pid}"
sleep 1
}
@@ -128,9 +128,9 @@ setup_passt_in_ns() {
[ ${DEBUG} -eq 1 ] && __opts="${__opts} -d"
[ ${TRACE} -eq 1 ] && __opts="${__opts} --trace"
- context_run_bg pasta "./pasta ${__opts} -t 10001,10002,10011,10012 -T 10003,10013
-u 10001,10002,10011,10012 -U 10003,10013 -P pasta.pid ${NSHOLDER} ns.hold hold"
+ context_run_bg pasta "./pasta ${__opts} -t 10001,10002,10011,10012 -T 10003,10013
-u 10001,10002,10011,10012 -U 10003,10013 -P ${STATESETUP}/pasta.pid ${NSHOLDER}
${STATESETUP}/ns.hold hold"
sleep 1
- __ns_pid=$(${NSHOLDER} ns.hold pid)
+ __ns_pid=$(${NSHOLDER} ${STATESETUP}/ns.hold pid)
context_setup_nsenter qemu "-t ${__ns_pid} -U -n -p --preserve-credentials"
context_setup_nsenter ns "-t ${__ns_pid} -U -n -p --preserve-credentials"
@@ -149,11 +149,11 @@ setup_passt_in_ns() {
if [ ${VALGRIND} -eq 1 ]; then
context_run passt "make clean"
context_run passt "make valgrind"
- context_run_bg passt "valgrind --max-stackframe=$((4 * 1024 * 1024))
--trace-children=yes --vgdb=no --error-exitcode=1 --suppressions=test/valgrind.supp
./passt -f ${__opts} -t 10001,10011,10021,10031 -u 10001,10011,10021,10031 -P
passt.pid"
+ context_run_bg passt "valgrind --max-stackframe=$((4 * 1024 * 1024))
--trace-children=yes --vgdb=no --error-exitcode=1 --suppressions=test/valgrind.supp
./passt -f ${__opts} -t 10001,10011,10021,10031 -u 10001,10011,10021,10031 -P
${STATESETUP}/passt.pid"
else
context_run passt "make clean"
context_run passt "make"
- context_run_bg passt "./passt -f ${__opts} -t 10001,10011,10021,10031 -u
10001,10011,10021,10031 -P passt.pid"
+ context_run_bg passt "./passt -f ${__opts} -t 10001,10011,10021,10031 -u
10001,10011,10021,10031 -P ${STATESETUP}/passt.pid"
fi
sleep 5
@@ -169,7 +169,7 @@ setup_passt_in_ns() {
'virtio-net.napi_tx=1"' \
" -device virtio-net-pci,netdev=hostnet0,x-txburst=524288" \
" -netdev socket,fd=5,id=hostnet0" \
- ' -pidfile passt_in_ns_qemu.pid' \
+ " -pidfile ${STATESETUP}/qemu.pid" \
" -device vhost-vsock-pci,guest-cid=$GUEST_CID"
context_setup_guest guest $GUEST_CID
@@ -197,16 +197,16 @@ setup_two_guests() {
[ ${PCAP} -eq 1 ] && __opts="${__opts} -p ${LOGDIR}/pasta_1.pcap"
[ ${DEBUG} -eq 1 ] && __opts="${__opts} -d"
[ ${TRACE} -eq 1 ] && __opts="${__opts} --trace"
- context_run_bg pasta_1 "./pasta ${__opts} -P pasta_1.pid -t 10001,10002 -T
10003,10004 -u 10001,10002 -U 10003,10004 ${NSHOLDER} ns1.hold hold"
- __ns1_pid=$(${NSHOLDER} ns1.hold pid)
+ context_run_bg pasta_1 "./pasta ${__opts} -P pasta_1.pid -t 10001,10002 -T
10003,10004 -u 10001,10002 -U 10003,10004 ${NSHOLDER} ${STATESETUP}/ns1.hold hold"
+ __ns1_pid=$(${NSHOLDER} ${STATESETUP}/ns1.hold pid)
context_setup_nsenter passt_1 -U -n -p --preserve-credentials -t ${__ns1_pid}
__opts=
[ ${PCAP} -eq 1 ] && __opts="${__opts} -p ${LOGDIR}/pasta_2.pcap"
[ ${DEBUG} -eq 1 ] && __opts="${__opts} -d"
[ ${TRACE} -eq 1 ] && __opts="${__opts} --trace"
- context_run_bg pasta_2 "./pasta ${__opts} -P pasta_2.pid -t 10004,10005 -T
10003,10001 -u 10004,10005 -U 10003,10001 ${NSHOLDER} ns2.hold hold"
- __ns2_pid=$(${NSHOLDER} ns2.hold pid)
+ context_run_bg pasta_2 "./pasta ${__opts} -P pasta_2.pid -t 10004,10005 -T
10003,10001 -u 10004,10005 -U 10003,10001 ${NSHOLDER} ${STATESETUP}/ns2.hold hold"
+ __ns2_pid=$(${NSHOLDER} ${STATESETUP}/ns2.hold pid)
context_setup_nsenter passt_2 -U -n -p --preserve-credentials -t ${__ns2_pid}
context_setup_nsenter qemu_1 -U -n -p --preserve-credentials -t ${__ns1_pid}
@@ -224,7 +224,7 @@ setup_two_guests() {
[ ${DEBUG} -eq 1 ] && __opts="${__opts} -d"
[ ${TRACE} -eq 1 ] && __opts="${__opts} --trace"
- context_run_bg passt_1 "./passt -P passt_1.pid -f ${__opts} -t 10001 -u
10001"
+ context_run_bg passt_1 "./passt -P ${STATESETUP}/passt_1.pid -f ${__opts} -t 10001
-u 10001"
sleep 1
__opts=
@@ -232,7 +232,7 @@ setup_two_guests() {
[ ${DEBUG} -eq 1 ] && __opts="${__opts} -d"
[ ${TRACE} -eq 1 ] && __opts="${__opts} --trace"
- context_run_bg passt_2 "./passt -P passt_2.pid -f ${__opts} -t 10004 -u
10004"
+ context_run_bg passt_2 "./passt -P ${STATESETUP}/passt_2.pid -f ${__opts} -t 10004
-u 10004"
GUEST_1_CID=94557
context_run_bg qemu_1 './qrap 5 qemu-system-$(uname -m)' \
@@ -245,7 +245,7 @@ setup_two_guests() {
'virtio-net.napi_tx=1"' \
" -device virtio-net-pci,netdev=hostnet0,x-txburst=16384" \
" -netdev socket,fd=5,id=hostnet0" \
- ' -pidfile two_guests_qemu_1.pid' \
+ " -pidfile ${STATESETUP}/qemu_1.pid" \
" -device vhost-vsock-pci,guest-cid=$GUEST_1_CID"
GUEST_2_CID=94558
@@ -259,7 +259,7 @@ setup_two_guests() {
'virtio-net.napi_tx=1"' \
" -device virtio-net-pci,netdev=hostnet0,x-txburst=16384" \
" -netdev socket,fd=5,id=hostnet0" \
- ' -pidfile two_guests_qemu_2.pid' \
+ " -pidfile ${STATESETUP}/qemu_2.pid" \
" -device vhost-vsock-pci,guest-cid=$GUEST_2_CID"
context_setup_guest guest_1 ${GUEST_1_CID}
@@ -290,9 +290,9 @@ teardown_distro() {
# teardown_passt() - Kill qemu, remove passt PID file
teardown_passt() {
- kill $(cat passt_qemu.pid)
+ kill $(cat "${STATESETUP}/qemu.pid")
- rm passt.pid
+ rm "${STATESETUP}/passt.pid"
teardown_context_watch ${PANE_HOST} host
teardown_context_watch ${PANE_PASST} passt
@@ -301,7 +301,7 @@ teardown_passt() {
# teardown_passt() - Exit namespace, kill pasta process
teardown_pasta() {
- ${NSHOLDER} ns.hold stop
+ ${NSHOLDER} "${STATESETUP}/ns.hold" stop
context_wait unshare
teardown_context_watch ${PANE_HOST} host
@@ -311,13 +311,13 @@ teardown_pasta() {
# teardown_passt_in_ns() - Exit namespace, kill qemu and pasta, remove pid file
teardown_passt_in_ns() {
- context_run ns kill $(cat passt_in_ns_qemu.pid)
+ context_run ns kill $(cat "${STATESETUP}/qemu.pid")
context_wait qemu
- ${NSHOLDER} ns.hold stop
+ ${NSHOLDER} "${STATESETUP}/ns.hold" stop
context_wait pasta
- rm passt.pid pasta.pid
+ rm "${STATESETUP}/passt.pid" "${STATESETUP}/pasta.pid"
teardown_context_watch ${PANE_HOST} host
teardown_context_watch ${PANE_PASST} pasta passt
@@ -327,23 +327,23 @@ teardown_passt_in_ns() {
# teardown_two_guests() - Exit namespaces, kill qemu processes, passt and pasta
teardown_two_guests() {
- __ns1_pid=$(${NSHOLDER} ns1.hold pid)
- __ns2_pid=$(${NSHOLDER} ns2.hold pid)
- nsenter -U -p --preserve-credentials -t ${__ns1_pid} kill $(cat two_guests_qemu_1.pid)
- nsenter -U -p --preserve-credentials -t ${__ns2_pid} kill $(cat two_guests_qemu_2.pid)
+ __ns1_pid=$(${NSHOLDER} "${STATESETUP}/ns1.hold" pid)
+ __ns2_pid=$(${NSHOLDER} "${STATESETUP}/ns2.hold" pid)
+ nsenter -U -p --preserve-credentials -t ${__ns1_pid} kill $(cat
"${STATESETUP}/qemu_1.pid")
+ nsenter -U -p --preserve-credentials -t ${__ns2_pid} kill $(cat
"${STATESETUP}/qemu_2.pid")
context_wait qemu_1
context_wait qemu_2
- nsenter -U -p --preserve-credentials -t ${__ns1_pid} kill $(cat passt_1.pid)
- nsenter -U -p --preserve-credentials -t ${__ns2_pid} kill $(cat passt_2.pid)
+ nsenter -U -p --preserve-credentials -t ${__ns1_pid} kill $(cat
"${STATESETUP}/passt_1.pid")
+ nsenter -U -p --preserve-credentials -t ${__ns2_pid} kill $(cat
"${STATESETUP}/passt_2.pid")
context_wait passt_1
context_wait passt_2
- ${NSHOLDER} ns1.hold stop
- ${NSHOLDER} ns2.hold stop
+ ${NSHOLDER} "${STATESETUP}/ns1.hold" stop
+ ${NSHOLDER} "${STATESETUP}/ns2.hold" stop
context_wait pasta_1
context_wait pasta_2
- rm -f passt_[12].pid pasta_[12].pid
+ rm -f "${STATESETUP}/passt__[12].pid"
"${STATESETUP}/pasta_[12].pid"
teardown_context_watch ${PANE_HOST} host
teardown_context_watch ${PANE_GUEST_1} qemu_1 guest_1
diff --git a/test/passt/shutdown b/test/passt/shutdown
index ce90ea9..34ddb64 100644
--- a/test/passt/shutdown
+++ b/test/passt/shutdown
@@ -14,7 +14,7 @@
test shutdown: exit code
-hout PASST_PID cat passt.pid
+hout PASST_PID cat __STATESETUP__/passt.pid
host kill __PASST_PID__
sleep 1
passtw
diff --git a/test/passt_in_ns/shutdown b/test/passt_in_ns/shutdown
index abe9d6c..b602ec2 100644
--- a/test/passt_in_ns/shutdown
+++ b/test/passt_in_ns/shutdown
@@ -14,7 +14,7 @@
test shutdown: exit code
-nsout PASST_PID cat passt.pid
+nsout PASST_PID cat __STATESETUP__/passt.pid
ns kill __PASST_PID__
sleep 1
passtw
--
2.37.3
On Wed, Sep 07, 2022 at 11:02:55PM +1000, David Gibson wrote:The tests create temporary files and fifos in a number of places. Some of them can interfere with later test runs, and are awkward to clean up. Consolidate them in a single per-run directory in /tmp which gets cleaned up automatically.I've realized today this wasn't quite as complete as I thought, don't apply yet, I'll send a v2. -- David Gibson | I'll have my music baroque, and my code david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_ | _way_ _around_! http://www.ozlabs.org/~dgibson