Ah, yes, it looks better now. Three remarks: On Wed, 20 May 2026 23:08:48 +1000 David Gibson wrote:

Splice forwarding can be blocked either waiting for data from one side or waiting for space on the other. For that reason, tcp_splice_sock_handler() on either socket can forward data in either or both directions, depending on whether we have EPOLLIN, EPOLLOUT or both events.

The flow control for this is quite hard to follow though, since we forward in one direction, then sometimes loop back with a goto to do it in the other direction. Simplify this by adding a tcp_splice_forward() function with the logic to forward in one direction and calling it either once or twice from tcp_splice_sock_handler().

Signed-off-by: David Gibson --- tcp_splice.c | 137 ++++++++++++++++++++++++++------------------------- 1 file changed, 71 insertions(+), 66 deletions(-)

diff --git a/tcp_splice.c b/tcp_splice.c index 34ffea73..18e8b303 100644 --- a/tcp_splice.c +++ b/tcp_splice.c @@ -474,67 +474,20 @@ void tcp_splice_conn_from_sock(const struct ctx *c, union flow *flow, int s0) }

/** - * tcp_splice_sock_handler() - Handler for socket mapped to spliced connection + * tcp_splice_forward() - Forward data in one direction using splice() * @c: Execution context - * @ref: epoll reference - * @events: epoll events bitmap + * @conn: Connection to forward data for + * @fromsidei: Side to forward data from * * #syscalls:pasta splice */ -void tcp_splice_sock_handler(struct ctx *c, union epoll_ref ref, - uint32_t events) +static int tcp_splice_forward(struct ctx *c, struct + tcp_splice_conn *conn, unsigned fromsidei)

I think the struct argument should all be on the same line.

{ - struct tcp_splice_conn *conn = conn_at_sidx(ref.flowside); - unsigned evsidei = ref.flowside.sidei, fromsidei; - uint8_t lowat_set_flag, lowat_act_flag; - int eof, never_read; - - assert(conn->f.type == FLOW_TCP_SPLICE); - - if (conn->events == SPLICE_CLOSED) - return; - - if (events & EPOLLERR) { - int err, rc; - socklen_t sl = sizeof(err); - - rc = getsockopt(ref.fd, SOL_SOCKET, SO_ERROR, &err, &sl); - if (rc) - flow_perror(conn, "Error retrieving SO_ERROR"); - else - flow_dbg(conn, "Error event on %s socket: %s", - pif_name(conn->f.pif[evsidei]), - strerror_(err)); - goto reset; - } - - if (conn->events == SPLICE_CONNECT) { - if (!(events & EPOLLOUT)) { - flow_err(conn, "Unexpected events 0x%x during connect", - events); - goto reset; - } - if (tcp_splice_connect_finish(c, conn)) - goto reset; - } - - if (events & EPOLLOUT) { - fromsidei = !evsidei; - conn_event(conn, ~OUT_WAIT(evsidei)); - } else { - fromsidei = evsidei; - } - - if (events & EPOLLRDHUP) - /* For side 0 this is fake, but implied */ - conn_event(conn, FIN_RCVD(evsidei)); - -swap: - eof = 0; - never_read = 1; - - lowat_set_flag = RCVLOWAT_SET(fromsidei); - lowat_act_flag = RCVLOWAT_ACT(fromsidei); + uint8_t lowat_set_flag = RCVLOWAT_SET(fromsidei); + uint8_t lowat_act_flag = RCVLOWAT_ACT(fromsidei); + int never_read = 1; + int eof = 0;

while (1) { ssize_t readlen, written, pending; @@ -551,7 +504,7 @@ retry: if (readlen < 0 && errno != EAGAIN) { flow_perror(conn, "Splicing from %s socket", pif_name(conn->f.pif[fromsidei])); - goto reset; + return -1; }

flow_trace(conn, "%zi from read-side call", readlen); @@ -578,7 +531,7 @@ retry: if (written < 0 && errno != EAGAIN) { flow_perror(conn, "Splicing to %s socket", pif_name(conn->f.pif[!fromsidei])); - goto reset; + return -1; }

flow_trace(conn, "%zi from write-side call (passed %zi)", @@ -639,24 +592,76 @@ retry: if (shutdown(conn->s[!sidei], SHUT_WR) < 0) { flow_perror(conn, "shutdown() on %s", pif_name(conn->f.pif[!sidei])); - goto reset; + return -1; } conn_event(conn, FIN_SENT(!sidei)); } } }

- if (CONN_HAS(conn, FIN_SENT(0) | FIN_SENT(1))) { - /* Clean close, no reset */ - conn_flag(conn, CLOSING); + return 0; +} + +/** + * tcp_splice_sock_handler() - Handler for socket mapped to spliced connection + * @c: Execution context + * @ref: epoll reference + * @events: epoll events bitmap + */ +void tcp_splice_sock_handler(struct ctx *c, union epoll_ref ref, + uint32_t events) +{ + struct tcp_splice_conn *conn = conn_at_sidx(ref.flowside); + unsigned evsidei = ref.flowside.sidei; + + assert(conn->f.type == FLOW_TCP_SPLICE); + + if (conn->events == SPLICE_CLOSED) return; + + if (events & EPOLLERR) { + int err, rc; + socklen_t sl = sizeof(err); + + rc = getsockopt(ref.fd, SOL_SOCKET, SO_ERROR, &err, &sl); + if (rc) + flow_perror(conn, "Error retrieving SO_ERROR"); + else + flow_dbg(conn, "Error event on %s socket: %s", + pif_name(conn->f.pif[evsidei]), + strerror_(err)); + goto reset; + } + + if (conn->events == SPLICE_CONNECT) { + if (!(events & EPOLLOUT)) { + flow_err(conn, "Unexpected events 0x%x during connect", + events); + goto reset; + } + if (tcp_splice_connect_finish(c, conn)) + goto reset; + } + + if (events & EPOLLRDHUP) + /* For side 0 this is fake, but implied */ + conn_event(conn, FIN_RCVD(evsidei));

I saw this all goes away in 5/6, so it wouldn't be relevant. But in case we decide to drop 5/6, here are my remarks on the this. EPOLLRDHUP is now handled before checking the other direction of the connection in case of EPOLLOUT. I think it actually makes more sense this way because we update flags with everything we know until that point, and it shouldn't have a functional effect (the check at the end of the new tcp_splice_forward() is on FIN_RCVD(fromsidei)), but I'm raising that in case the change wasn't intended.

+ + if (events & EPOLLOUT) { + if (tcp_splice_forward(c, conn, !evsidei)) + goto reset; + conn_event(conn, ~OUT_WAIT(evsidei)); }

- if ((events & (EPOLLIN | EPOLLOUT)) == (EPOLLIN | EPOLLOUT)) { - events = EPOLLIN; + if (events & EPOLLIN) { + if (tcp_splice_forward(c, conn, evsidei)) + goto reset;

This should be: goto reset; instead of: goto reset;

+ }

- fromsidei = !fromsidei; - goto swap; + if (CONN_HAS(conn, FIN_SENT(0) | FIN_SENT(1))) { + /* Clean close, no reset */ + conn_flag(conn, CLOSING); + return; }

if (events & EPOLLHUP) {

-- Stefano

On Thu, 21 May 2026 10:50:24 +1000 David Gibson wrote:

On Wed, May 20, 2026 at 10:28:52PM +0200, Stefano Brivio wrote:

...

Ah, yes, it looks better now. Three remarks:

On Wed, 20 May 2026 23:08:48 +1000 David Gibson wrote:

...

Splice forwarding can be blocked either waiting for data from one side or waiting for space on the other. For that reason, tcp_splice_sock_handler() on either socket can forward data in either or both directions, depending on whether we have EPOLLIN, EPOLLOUT or both events.

The flow control for this is quite hard to follow though, since we forward in one direction, then sometimes loop back with a goto to do it in the other direction. Simplify this by adding a tcp_splice_forward() function with the logic to forward in one direction and calling it either once or twice from tcp_splice_sock_handler().

Signed-off-by: David Gibson --- tcp_splice.c | 137 ++++++++++++++++++++++++++------------------------- 1 file changed, 71 insertions(+), 66 deletions(-)

diff --git a/tcp_splice.c b/tcp_splice.c index 34ffea73..18e8b303 100644 --- a/tcp_splice.c +++ b/tcp_splice.c @@ -474,67 +474,20 @@ void tcp_splice_conn_from_sock(const struct ctx *c, union flow *flow, int s0) }

/** - * tcp_splice_sock_handler() - Handler for socket mapped to spliced connection + * tcp_splice_forward() - Forward data in one direction using splice() * @c: Execution context - * @ref: epoll reference - * @events: epoll events bitmap + * @conn: Connection to forward data for + * @fromsidei: Side to forward data from * * #syscalls:pasta splice */ -void tcp_splice_sock_handler(struct ctx *c, union epoll_ref ref, - uint32_t events) +static int tcp_splice_forward(struct ctx *c, struct + tcp_splice_conn *conn, unsigned fromsidei)

I think the struct argument should all be on the same line.

Oops, definitely. Forgot to document the return value too.

...

...

{ - struct tcp_splice_conn *conn = conn_at_sidx(ref.flowside); - unsigned evsidei = ref.flowside.sidei, fromsidei; - uint8_t lowat_set_flag, lowat_act_flag; - int eof, never_read; - - assert(conn->f.type == FLOW_TCP_SPLICE); - - if (conn->events == SPLICE_CLOSED) - return; - - if (events & EPOLLERR) { - int err, rc; - socklen_t sl = sizeof(err); - - rc = getsockopt(ref.fd, SOL_SOCKET, SO_ERROR, &err, &sl); - if (rc) - flow_perror(conn, "Error retrieving SO_ERROR"); - else - flow_dbg(conn, "Error event on %s socket: %s", - pif_name(conn->f.pif[evsidei]), - strerror_(err)); - goto reset; - } - - if (conn->events == SPLICE_CONNECT) { - if (!(events & EPOLLOUT)) { - flow_err(conn, "Unexpected events 0x%x during connect", - events); - goto reset; - } - if (tcp_splice_connect_finish(c, conn)) - goto reset; - } - - if (events & EPOLLOUT) { - fromsidei = !evsidei; - conn_event(conn, ~OUT_WAIT(evsidei)); - } else { - fromsidei = evsidei; - } - - if (events & EPOLLRDHUP) - /* For side 0 this is fake, but implied */ - conn_event(conn, FIN_RCVD(evsidei)); - -swap: - eof = 0; - never_read = 1; - - lowat_set_flag = RCVLOWAT_SET(fromsidei); - lowat_act_flag = RCVLOWAT_ACT(fromsidei); + uint8_t lowat_set_flag = RCVLOWAT_SET(fromsidei); + uint8_t lowat_act_flag = RCVLOWAT_ACT(fromsidei); + int never_read = 1; + int eof = 0;

while (1) { ssize_t readlen, written, pending; @@ -551,7 +504,7 @@ retry: if (readlen < 0 && errno != EAGAIN) { flow_perror(conn, "Splicing from %s socket", pif_name(conn->f.pif[fromsidei])); - goto reset; + return -1; }

flow_trace(conn, "%zi from read-side call", readlen); @@ -578,7 +531,7 @@ retry: if (written < 0 && errno != EAGAIN) { flow_perror(conn, "Splicing to %s socket", pif_name(conn->f.pif[!fromsidei])); - goto reset; + return -1; }

flow_trace(conn, "%zi from write-side call (passed %zi)", @@ -639,24 +592,76 @@ retry: if (shutdown(conn->s[!sidei], SHUT_WR) < 0) { flow_perror(conn, "shutdown() on %s", pif_name(conn->f.pif[!sidei])); - goto reset; + return -1; } conn_event(conn, FIN_SENT(!sidei)); } } }

- if (CONN_HAS(conn, FIN_SENT(0) | FIN_SENT(1))) { - /* Clean close, no reset */ - conn_flag(conn, CLOSING); + return 0; +} + +/** + * tcp_splice_sock_handler() - Handler for socket mapped to spliced connection + * @c: Execution context + * @ref: epoll reference + * @events: epoll events bitmap + */ +void tcp_splice_sock_handler(struct ctx *c, union epoll_ref ref, + uint32_t events) +{ + struct tcp_splice_conn *conn = conn_at_sidx(ref.flowside); + unsigned evsidei = ref.flowside.sidei; + + assert(conn->f.type == FLOW_TCP_SPLICE); + + if (conn->events == SPLICE_CLOSED) return; + + if (events & EPOLLERR) { + int err, rc; + socklen_t sl = sizeof(err); + + rc = getsockopt(ref.fd, SOL_SOCKET, SO_ERROR, &err, &sl); + if (rc) + flow_perror(conn, "Error retrieving SO_ERROR"); + else + flow_dbg(conn, "Error event on %s socket: %s", + pif_name(conn->f.pif[evsidei]), + strerror_(err)); + goto reset; + } + + if (conn->events == SPLICE_CONNECT) { + if (!(events & EPOLLOUT)) { + flow_err(conn, "Unexpected events 0x%x during connect", + events); + goto reset; + } + if (tcp_splice_connect_finish(c, conn)) + goto reset; + } + + if (events & EPOLLRDHUP) + /* For side 0 this is fake, but implied */ + conn_event(conn, FIN_RCVD(evsidei));

I saw this all goes away in 5/6, so it wouldn't be relevant. But in case we decide to drop 5/6, here are my remarks on the this.

EPOLLRDHUP is now handled before checking the other direction of the connection in case of EPOLLOUT.

I'm pretty sure that hasn't changed. In the old code EPOLLRDHUP handling was before we did any of the actual data handling for EPOLLIN or EPOLLOUT.

Well, kind of, in the sense that it's true we did that before any data handling, but we had two checks: if (conn->events == SPLICE_CLOSED) return; [...] if (conn->events == SPLICE_CONNECT) { if (!(events & EPOLLOUT)) { [...] goto reset; } if (tcp_splice_connect_finish(c, conn)) goto reset; } based on conn->events _before_ setting FIN_RCVD(evsidei). Now, that should never be relevant for SPLICE_CLOSED. I'm not sure about SPLICE_CONNECT, what if we get EPOLLRDHUP right away as we are re-establishing a connection? I need to look into that, but I wasn't able to see any difference in behaviour so far. What I really missed here is:

...

I think it actually makes more sense this way because we update flags with everything we know until that point, and it shouldn't have a functional effect (the check at the end of the new tcp_splice_forward() is on FIN_RCVD(fromsidei)), but I'm raising that in case the change wasn't intended.

...

+ + if (events & EPOLLOUT) { + if (tcp_splice_forward(c, conn, !evsidei)) + goto reset; + conn_event(conn, ~OUT_WAIT(evsidei));

^^^ this swap, which caused https://bugs.passt.top/show_bug.cgi?id=207. Earlier, we had: if (events & EPOLLOUT) { fromsidei = !evsidei; conn_event(conn, ~OUT_WAIT(evsidei)); } ... and then the rest of what's now tcp_splice_forward(). If we clear OUT_WAIT *later*, even if tcp_splice_forward() decides to keep it after processing an EPOLLOUT event, we'll miss events. It turns out that 4ccb2eebaa02 ("tcp_splice: Simplify / correct OUT_WAIT flag handling") fixes this. I'm still checking whether the fix is complete though.

...

...

}

- if ((events & (EPOLLIN | EPOLLOUT)) == (EPOLLIN | EPOLLOUT)) { - events = EPOLLIN; + if (events & EPOLLIN) { + if (tcp_splice_forward(c, conn, evsidei)) + goto reset;

This should be:

goto reset;

instead of:

goto reset;

Oops, fixed.

...

...

+ }

- fromsidei = !fromsidei; - goto swap; + if (CONN_HAS(conn, FIN_SENT(0) | FIN_SENT(1))) { + /* Clean close, no reset */ + conn_flag(conn, CLOSING); + return; }

if (events & EPOLLHUP) {

-- Stefano

-- Stefano

On Fri, Jun 12, 2026 at 06:55:18PM +0200, Stefano Brivio wrote:

On Fri, 12 Jun 2026 18:18:41 +0200 Stefano Brivio wrote:

...

On Thu, 21 May 2026 10:50:24 +1000 David Gibson wrote:

...

On Wed, May 20, 2026 at 10:28:52PM +0200, Stefano Brivio wrote:

...

Ah, yes, it looks better now. Three remarks:

On Wed, 20 May 2026 23:08:48 +1000 David Gibson wrote:

...

Splice forwarding can be blocked either waiting for data from one side or waiting for space on the other. For that reason, tcp_splice_sock_handler() on either socket can forward data in either or both directions, depending on whether we have EPOLLIN, EPOLLOUT or both events.

The flow control for this is quite hard to follow though, since we forward in one direction, then sometimes loop back with a goto to do it in the other direction. Simplify this by adding a tcp_splice_forward() function with the logic to forward in one direction and calling it either once or twice from tcp_splice_sock_handler().

Signed-off-by: David Gibson --- tcp_splice.c | 137 ++++++++++++++++++++++++++------------------------- 1 file changed, 71 insertions(+), 66 deletions(-)

diff --git a/tcp_splice.c b/tcp_splice.c index 34ffea73..18e8b303 100644 --- a/tcp_splice.c +++ b/tcp_splice.c @@ -474,67 +474,20 @@ void tcp_splice_conn_from_sock(const struct ctx *c, union flow *flow, int s0) }

/** - * tcp_splice_sock_handler() - Handler for socket mapped to spliced connection + * tcp_splice_forward() - Forward data in one direction using splice() * @c: Execution context - * @ref: epoll reference - * @events: epoll events bitmap + * @conn: Connection to forward data for + * @fromsidei: Side to forward data from * * #syscalls:pasta splice */ -void tcp_splice_sock_handler(struct ctx *c, union epoll_ref ref, - uint32_t events) +static int tcp_splice_forward(struct ctx *c, struct + tcp_splice_conn *conn, unsigned fromsidei)

I think the struct argument should all be on the same line.

Oops, definitely. Forgot to document the return value too.

...

...

{ - struct tcp_splice_conn *conn = conn_at_sidx(ref.flowside); - unsigned evsidei = ref.flowside.sidei, fromsidei; - uint8_t lowat_set_flag, lowat_act_flag; - int eof, never_read; - - assert(conn->f.type == FLOW_TCP_SPLICE); - - if (conn->events == SPLICE_CLOSED) - return; - - if (events & EPOLLERR) { - int err, rc; - socklen_t sl = sizeof(err); - - rc = getsockopt(ref.fd, SOL_SOCKET, SO_ERROR, &err, &sl); - if (rc) - flow_perror(conn, "Error retrieving SO_ERROR"); - else - flow_dbg(conn, "Error event on %s socket: %s", - pif_name(conn->f.pif[evsidei]), - strerror_(err)); - goto reset; - } - - if (conn->events == SPLICE_CONNECT) { - if (!(events & EPOLLOUT)) { - flow_err(conn, "Unexpected events 0x%x during connect", - events); - goto reset; - } - if (tcp_splice_connect_finish(c, conn)) - goto reset; - } - - if (events & EPOLLOUT) { - fromsidei = !evsidei; - conn_event(conn, ~OUT_WAIT(evsidei)); - } else { - fromsidei = evsidei; - } - - if (events & EPOLLRDHUP) - /* For side 0 this is fake, but implied */ - conn_event(conn, FIN_RCVD(evsidei)); - -swap: - eof = 0; - never_read = 1; - - lowat_set_flag = RCVLOWAT_SET(fromsidei); - lowat_act_flag = RCVLOWAT_ACT(fromsidei); + uint8_t lowat_set_flag = RCVLOWAT_SET(fromsidei); + uint8_t lowat_act_flag = RCVLOWAT_ACT(fromsidei); + int never_read = 1; + int eof = 0;

while (1) { ssize_t readlen, written, pending; @@ -551,7 +504,7 @@ retry: if (readlen < 0 && errno != EAGAIN) { flow_perror(conn, "Splicing from %s socket", pif_name(conn->f.pif[fromsidei])); - goto reset; + return -1; }

flow_trace(conn, "%zi from read-side call", readlen); @@ -578,7 +531,7 @@ retry: if (written < 0 && errno != EAGAIN) { flow_perror(conn, "Splicing to %s socket", pif_name(conn->f.pif[!fromsidei])); - goto reset; + return -1; }

flow_trace(conn, "%zi from write-side call (passed %zi)", @@ -639,24 +592,76 @@ retry: if (shutdown(conn->s[!sidei], SHUT_WR) < 0) { flow_perror(conn, "shutdown() on %s", pif_name(conn->f.pif[!sidei])); - goto reset; + return -1; } conn_event(conn, FIN_SENT(!sidei)); } } }

- if (CONN_HAS(conn, FIN_SENT(0) | FIN_SENT(1))) { - /* Clean close, no reset */ - conn_flag(conn, CLOSING); + return 0; +} + +/** + * tcp_splice_sock_handler() - Handler for socket mapped to spliced connection + * @c: Execution context + * @ref: epoll reference + * @events: epoll events bitmap + */ +void tcp_splice_sock_handler(struct ctx *c, union epoll_ref ref, + uint32_t events) +{ + struct tcp_splice_conn *conn = conn_at_sidx(ref.flowside); + unsigned evsidei = ref.flowside.sidei; + + assert(conn->f.type == FLOW_TCP_SPLICE); + + if (conn->events == SPLICE_CLOSED) return; + + if (events & EPOLLERR) { + int err, rc; + socklen_t sl = sizeof(err); + + rc = getsockopt(ref.fd, SOL_SOCKET, SO_ERROR, &err, &sl); + if (rc) + flow_perror(conn, "Error retrieving SO_ERROR"); + else + flow_dbg(conn, "Error event on %s socket: %s", + pif_name(conn->f.pif[evsidei]), + strerror_(err)); + goto reset; + } + + if (conn->events == SPLICE_CONNECT) { + if (!(events & EPOLLOUT)) { + flow_err(conn, "Unexpected events 0x%x during connect", + events); + goto reset; + } + if (tcp_splice_connect_finish(c, conn)) + goto reset; + } + + if (events & EPOLLRDHUP) + /* For side 0 this is fake, but implied */ + conn_event(conn, FIN_RCVD(evsidei));

I saw this all goes away in 5/6, so it wouldn't be relevant. But in case we decide to drop 5/6, here are my remarks on the this.

EPOLLRDHUP is now handled before checking the other direction of the connection in case of EPOLLOUT.

I'm pretty sure that hasn't changed. In the old code EPOLLRDHUP handling was before we did any of the actual data handling for EPOLLIN or EPOLLOUT.

Well, kind of, in the sense that it's true we did that before any data handling, but we had two checks:

if (conn->events == SPLICE_CLOSED) return;

[...]

if (conn->events == SPLICE_CONNECT) { if (!(events & EPOLLOUT)) { [...] goto reset; } if (tcp_splice_connect_finish(c, conn)) goto reset; }

based on conn->events _before_ setting FIN_RCVD(evsidei).

Now, that should never be relevant for SPLICE_CLOSED. I'm not sure about SPLICE_CONNECT, what if we get EPOLLRDHUP right away as we are re-establishing a connection? I need to look into that, but I wasn't able to see any difference in behaviour so far.

Ah, never mind, those checks are all now part of tcp_splice_sock_handler() anyway. So, right, there should be no functional change in the end.

...

What I really missed here is:

...

...

I think it actually makes more sense this way because we update flags with everything we know until that point, and it shouldn't have a functional effect (the check at the end of the new tcp_splice_forward() is on FIN_RCVD(fromsidei)), but I'm raising that in case the change wasn't intended.

...

+ + if (events & EPOLLOUT) { + if (tcp_splice_forward(c, conn, !evsidei)) + goto reset; + conn_event(conn, ~OUT_WAIT(evsidei));

^^^

this swap, which caused https://bugs.passt.top/show_bug.cgi?id=207.

Earlier, we had:

if (events & EPOLLOUT) { fromsidei = !evsidei; conn_event(conn, ~OUT_WAIT(evsidei)); } ...

and then the rest of what's now tcp_splice_forward().

If we clear OUT_WAIT *later*, even if tcp_splice_forward() decides to keep it after processing an EPOLLOUT event, we'll miss events.

It turns out that 4ccb2eebaa02 ("tcp_splice: Simplify / correct OUT_WAIT flag handling") fixes this. I'm still checking whether the fix is complete though.

I'm fairly convinced it is, because with that commit we don't care anymore whether EPOLLOUT was set to begin with and just set OUT_WAIT as obviously needed.

Reading that again just reminded me that I actually spotted this but I saw it was going away in 5/6 of this revision of the series... and then I forgot to write that down. :(

Somewhat funnily, that commit message says:

-- We clear the OUT_WAIT flag when we complete forwarding on an EPOLLOUT event, but that's not quite right. Even though it's called on an EPOLLOUT, tcp_splice_forward() could, in principle empty the pipe, but also read enough new data from the other side to fill it again. That would set OUT_WAIT internally, but it would be cleared after returning meaning we could miss a necessary wakeup. --

...well, yes, but that problem didn't exist before. :)

Right. It looks like the issue was that I made the series in a couple of sessions / batches. I spotted the problem in the second batch, failing to realise that I'd introduced it in the first batch, rather than it existing before that. Well, that's embarrassing, but at least it's fixed now. I do think the final way of calculating OUT_WAIT is easier to reason about and more clearly correct.

Anyway, tagging a new release now.

Ta. -- David Gibson (he or they) | I'll have my music baroque, and my code david AT gibson.dropbear.id.au | minimalist, thank you, not the other way | around. http://www.ozlabs.org/~dgibson