[PATCH v24 5/5] test: Add migration tests

From: Stefano Brivio <sbrivio(a)redhat.com>

PCAP=1 ./run migrate/basic is oddly satisfying.

PCAP=1 ./run migrate/bidirectional and migrate/iperf3_out4 are even
better.

Signed-off-by: Stefano Brivio <sbrivio(a)redhat.com>
Signed-off-by: David Gibson <david(a)gibson.dropbear.id.au>
---
 test/lib/layout             |  55 +++++++++++++-
 test/lib/setup              | 138 +++++++++++++++++++++++++++++++++++-
 test/lib/test               |  48 +++++++++++++
 test/migrate/basic          |  59 +++++++++++++++
 test/migrate/bidirectional  |  64 +++++++++++++++++
 test/migrate/iperf3_bidir6  |  58 +++++++++++++++
 test/migrate/iperf3_in4     |  50 +++++++++++++
 test/migrate/iperf3_in6     |  58 +++++++++++++++
 test/migrate/iperf3_out4    |  50 +++++++++++++
 test/migrate/iperf3_out6    |  58 +++++++++++++++
 test/migrate/rampstream_in  |  10 +--
 test/migrate/rampstream_out |   6 +-
 test/run                    |  34 ++++++++-
 13 files changed, 677 insertions(+), 11 deletions(-)
 create mode 100644 test/migrate/basic
 create mode 100644 test/migrate/bidirectional
 create mode 100644 test/migrate/iperf3_bidir6
 create mode 100644 test/migrate/iperf3_in4
 create mode 100644 test/migrate/iperf3_in6
 create mode 100644 test/migrate/iperf3_out4
 create mode 100644 test/migrate/iperf3_out6

diff --git a/test/lib/layout b/test/lib/layout
index 4d035728..fddcdc4a 100644
--- a/test/lib/layout
+++ b/test/lib/layout
@@ -134,6 +134,54 @@ layout_two_guests() {
 
 	get_info_cols
 
+	pane_watch_contexts ${PANE_GUEST_1} "guest #1 in namespace #1" qemu_1 guest_1
+	pane_watch_contexts ${PANE_GUEST_2} "guest #2 in namespace #1" qemu_2 guest_2
+
+	tmux send-keys -l -t ${PANE_INFO} 'while cat
'"$STATEBASE/log_pipe"'; do :; done'
+	tmux send-keys -t ${PANE_INFO} -N 100 C-m
+	tmux select-pane -t ${PANE_INFO} -T "test log"
+
+	pane_watch_contexts ${PANE_HOST} host host
+	pane_watch_contexts ${PANE_PASST_1} "passt #1 in namespace #1" pasta_1
passt_1
+	pane_watch_contexts ${PANE_PASST_2} "passt #2 in namespace #1" pasta_1
passt_2
+
+	info_layout "two guests, two passt instances, in namespaces"
+
+	sleep 1
+}
+
+# layout_migrate() - Two guest panes, two passt panes, two passt-repair panes,
+#		     plus host and log
+layout_migrate() {
+	sleep 1
+
+	tmux kill-pane -a -t 0
+	cmd_write 0 clear
+
+	tmux split-window -v -t passt_test
+	tmux split-window -h -l '33%'
+	tmux split-window -h -t passt_test:1.1
+
+	tmux split-window -h -l '35%' -t passt_test:1.0
+	tmux split-window -v -t passt_test:1.0
+
+	tmux split-window -v -t passt_test:1.4
+	tmux split-window -v -t passt_test:1.6
+
+	tmux split-window -v -t passt_test:1.3
+
+	PANE_GUEST_1=0
+	PANE_GUEST_2=1
+	PANE_INFO=2
+	PANE_MON=3
+	PANE_HOST=4
+	PANE_PASST_REPAIR_1=5
+	PANE_PASST_1=6
+	PANE_PASST_REPAIR_2=7
+	PANE_PASST_2=8
+
+	get_info_cols
+
 	pane_watch_contexts ${PANE_GUEST_1} "guest #1 in namespace #1" qemu_1 guest_1
 	pane_watch_contexts ${PANE_GUEST_2} "guest #2 in namespace #2" qemu_2 guest_2
 
@@ -141,11 +189,16 @@ layout_two_guests() {
 	tmux send-keys -t ${PANE_INFO} -N 100 C-m
 	tmux select-pane -t ${PANE_INFO} -T "test log"
 
+	pane_watch_contexts ${PANE_MON} "QEMU monitor" mon mon
+
 	pane_watch_contexts ${PANE_HOST} host host
+	pane_watch_contexts ${PANE_PASST_REPAIR_1} "passt-repair #1 in namespace #1"
repair_1 passt_repair_1
 	pane_watch_contexts ${PANE_PASST_1} "passt #1 in namespace #1" pasta_1
passt_1
+
+	pane_watch_contexts ${PANE_PASST_REPAIR_2} "passt-repair #2 in namespace #2"
repair_2 passt_repair_2
 	pane_watch_contexts ${PANE_PASST_2} "passt #2 in namespace #2" pasta_2
passt_2
 
-	info_layout "two guests, two passt instances, in namespaces"
+	info_layout "two guests, two passt + passt-repair instances, in namespaces"
 
 	sleep 1
 }
diff --git a/test/lib/setup b/test/lib/setup
index ee671520..575bc215 100755
--- a/test/lib/setup
+++ b/test/lib/setup
@@ -305,6 +305,117 @@ setup_two_guests() {
 	context_setup_guest guest_2 ${GUEST_2_CID}
 }
 
+# setup_migrate() - Set up two namespace, run qemu, passt/passt-repair in both
+setup_migrate() {
+	context_setup_host host
+	context_setup_host mon
+	context_setup_host pasta_1
+	context_setup_host pasta_2
+
+	layout_migrate
+
+	# Ports:
+	#
+	#         guest #1  |  guest #2 |   ns #1   |    host
+	#         --------- |-----------|-----------|------------
+	#  10001  as server |           | to guest  |  to ns #1
+	#  10002            |           | as server |  to ns #1
+	#  10003            |           |  to init  |  as server
+	#  10004            | as server | to guest  |  to ns #1
+
+	__opts=
+	[ ${PCAP} -eq 1 ] && __opts="${__opts} -p ${LOGDIR}/pasta_1.pcap"
+	[ ${DEBUG} -eq 1 ] && __opts="${__opts} -d"
+	[ ${TRACE} -eq 1 ] && __opts="${__opts} --trace"
+
+	__map_host4=192.0.2.1
+	__map_host6=2001:db8:9a55::1
+	__map_ns4=192.0.2.2
+	__map_ns6=2001:db8:9a55::2
+
+	# Option 1: send stuff via spliced path in pasta
+	# context_run_bg pasta_1 "./pasta ${__opts} -P ${STATESETUP}/pasta_1.pid -t
10001,10002 -T 10003 -u 10001,10002 -U 10003 --config-net ${NSTOOL} hold
${STATESETUP}/ns1.hold"
+	# Option 2: send stuff via tap (--map-guest-addr) instead (useful to see capture of full
migration)
+	context_run_bg pasta_1 "./pasta ${__opts} -P ${STATESETUP}/pasta_1.pid -t
10001,10002,10004 -T 10003 -u 10001,10002,10004 -U 10003 --map-guest-addr ${__map_host4}
--map-guest-addr ${__map_host6} --config-net ${NSTOOL} hold ${STATESETUP}/ns1.hold"
+	context_setup_nstool passt_1 ${STATESETUP}/ns1.hold
+	context_setup_nstool passt_repair_1 ${STATESETUP}/ns1.hold
+
+	context_setup_nstool passt_2 ${STATESETUP}/ns1.hold
+	context_setup_nstool passt_repair_2 ${STATESETUP}/ns1.hold
+
+	context_setup_nstool qemu_1 ${STATESETUP}/ns1.hold
+	context_setup_nstool qemu_2 ${STATESETUP}/ns1.hold
+
+	__ifname="$(context_run qemu_1 "ip -j link show | jq -rM '.[] |
select(.link_type == \"ether\").ifname'")"
+
+	sleep 1
+
+	__opts="--vhost-user"
+	[ ${PCAP} -eq 1 ] && __opts="${__opts} -p ${LOGDIR}/passt_1.pcap"
+	[ ${DEBUG} -eq 1 ] && __opts="${__opts} -d"
+	[ ${TRACE} -eq 1 ] && __opts="${__opts} --trace"
+
+	context_run_bg passt_1 "./passt -s ${STATESETUP}/passt_1.socket -P
${STATESETUP}/passt_1.pid -f ${__opts} -t 10001 -u 10001"
+	wait_for [ -f "${STATESETUP}/passt_1.pid" ]
+
+	context_run_bg passt_repair_1 "./passt-repair
${STATESETUP}/passt_1.socket.repair"
+
+	__opts="--vhost-user"
+	[ ${PCAP} -eq 1 ] && __opts="${__opts} -p ${LOGDIR}/passt_2.pcap"
+	[ ${DEBUG} -eq 1 ] && __opts="${__opts} -d"
+	[ ${TRACE} -eq 1 ] && __opts="${__opts} --trace"
+
+	context_run_bg passt_2 "./passt -s ${STATESETUP}/passt_2.socket -P
${STATESETUP}/passt_2.pid -f ${__opts} -t 10004 -u 10004"
+	wait_for [ -f "${STATESETUP}/passt_2.pid" ]
+
+	context_run_bg passt_repair_2 "./passt-repair
${STATESETUP}/passt_2.socket.repair"
+
+	__vmem="512M"	# Keep migration fast
+	__qemu_netdev1="					       \
+		-chardev socket,id=c,path=${STATESETUP}/passt_1.socket \
+		-netdev vhost-user,id=v,chardev=c		       \
+		-device virtio-net,netdev=v			       \
+		-object memory-backend-memfd,id=m,share=on,size=${__vmem} \
+		-numa node,memdev=m"
+	__qemu_netdev2="					       \
+		-chardev socket,id=c,path=${STATESETUP}/passt_2.socket \
+		-netdev vhost-user,id=v,chardev=c		       \
+		-device virtio-net,netdev=v			       \
+		-object memory-backend-memfd,id=m,share=on,size=${__vmem} \
+		-numa node,memdev=m"
+
+	GUEST_1_CID=94557
+	context_run_bg qemu_1 'qemu-system-'"${QEMU_ARCH}"		     \
+		' -M accel=kvm:tcg'                                          \
+		' -m '${__vmem}' -cpu host -smp '${VCPUS}		     \
+		' -kernel '"${KERNEL}"					     \
+		' -initrd '${INITRAMFS}' -nographic -serial stdio'	     \
+		' -nodefaults'						     \
+		' -append "console=ttyS0 mitigations=off apparmor=0" '	     \
+		" ${__qemu_netdev1}"					     \
+		" -pidfile ${STATESETUP}/qemu_1.pid"			     \
+		" -device vhost-vsock-pci,guest-cid=$GUEST_1_CID"	     \
+		" -monitor unix:${STATESETUP}/qemu_1_mon.sock,server,nowait"
+
+	GUEST_2_CID=94558
+	context_run_bg qemu_2 'qemu-system-'"${QEMU_ARCH}"		     \
+		' -M accel=kvm:tcg'                                          \
+		' -m '${__vmem}' -cpu host -smp '${VCPUS}		     \
+		' -kernel '"${KERNEL}"					     \
+		' -initrd '${INITRAMFS}' -nographic -serial stdio'	     \
+		' -nodefaults'						     \
+		' -append "console=ttyS0 mitigations=off apparmor=0" '	     \
+		" ${__qemu_netdev2}"					     \
+		" -pidfile ${STATESETUP}/qemu_2.pid"			     \
+		" -device vhost-vsock-pci,guest-cid=$GUEST_2_CID"	     \
+		" -monitor unix:${STATESETUP}/qemu_2_mon.sock,server,nowait" \
+		" -incoming tcp:0:20005"
+
+	context_setup_guest guest_1 ${GUEST_1_CID}
+	# Only available after migration:
+	( context_setup_guest guest_2 ${GUEST_2_CID} & )
+}
+
 # teardown_context_watch() - Remove contexts and stop panes watching them
 # $1:	Pane number watching
 # $@:	Context names
@@ -375,7 +486,8 @@ teardown_two_guests() {
 	context_wait pasta_1
 	context_wait pasta_2
 
-	rm -f "${STATESETUP}/passt__[12].pid"
"${STATESETUP}/pasta_[12].pid"
+	rm "${STATESETUP}/passt_1.pid" "${STATESETUP}/passt_2.pid"
+	rm "${STATESETUP}/pasta_1.pid" "${STATESETUP}/pasta_2.pid"
 
 	teardown_context_watch ${PANE_HOST} host
 	teardown_context_watch ${PANE_GUEST_1} qemu_1 guest_1
@@ -384,6 +496,30 @@ teardown_two_guests() {
 	teardown_context_watch ${PANE_PASST_2} pasta_2 passt_2
 }
 
+# teardown_migrate() - Exit namespaces, kill qemu processes, passt and pasta
+teardown_migrate() {
+	${NSTOOL} exec ${STATESETUP}/ns1.hold -- kill $(cat
"${STATESETUP}/qemu_1.pid")
+	${NSTOOL} exec ${STATESETUP}/ns1.hold -- kill $(cat
"${STATESETUP}/qemu_2.pid")
+	context_wait qemu_1
+	context_wait qemu_2
+
+	${NSTOOL} exec ${STATESETUP}/ns1.hold -- kill $(cat
"${STATESETUP}/passt_2.pid")
+	context_wait passt_1
+	context_wait passt_2
+	${NSTOOL} stop "${STATESETUP}/ns1.hold"
+	context_wait pasta_1
+
+	rm -f "${STATESETUP}/passt_1.pid" "${STATESETUP}/passt_2.pid"
+	rm -f "${STATESETUP}/pasta_1.pid" "${STATESETUP}/pasta_2.pid"
+
+	teardown_context_watch ${PANE_HOST} host
+
+	teardown_context_watch ${PANE_GUEST_1} qemu_1 guest_1
+	teardown_context_watch ${PANE_GUEST_2} qemu_2 guest_2
+	teardown_context_watch ${PANE_PASST_1} pasta_1 passt_1
+	teardown_context_watch ${PANE_PASST_2} pasta_1 passt_2
+}
+
 # teardown_demo_passt() - Exit namespace, kill qemu, passt and pasta
 teardown_demo_passt() {
 	tmux send-keys -t ${PANE_GUEST} "C-c"
diff --git a/test/lib/test b/test/lib/test
index 91729af7..8f88567d 100755
--- a/test/lib/test
+++ b/test/lib/test
@@ -68,6 +68,45 @@ test_iperf3() {
 	TEST_ONE_subs="$(list_add_pair "${TEST_ONE_subs}"
"__${__var}__" "${__bw}" )"
 }
 
+# test_iperf3m() - Ugly helper for iperf3 directive, guest migration variant
+# $1:	Variable name: to put the measure bandwidth into
+# $2:	Initial source/client context
+# $3:	Second source/client context the guest is moving to
+# $4:	Destination name or address for client
+# $5:	Port number, ${i} is translated to process index
+# $6:	Run time, in seconds
+# $7:	Client options
+test_iperf3m() {
+	__var="${1}"; shift
+	__cctx="${1}"; shift
+	__cctx2="${1}"; shift
+	__dest="${1}"; shift
+	__port="${1}"; shift
+	__time="${1}"; shift
+
+	pane_or_context_run "${__cctx}" 'rm -f c.json'
+
+        # A 1s wait for connection on what's basically a local link
+        # indicates something is pretty wrong
+        __timeout=1000
+	pane_or_context_run_bg "${__cctx}" 				\
+		 'iperf3 -J -c '${__dest}' -p '${__port}		\
+		 '	 --connect-timeout '${__timeout}		\
+		 '	 -t'${__time}' -i0 '"${@}"' > c.json'		\
+
+	__jval=".end.sum_received.bits_per_second"
+
+	sleep $((${__time} + 3))
+
+	pane_or_context_output "${__cctx2}"				\
+		 'cat c.json'
+
+	__bw=$(pane_or_context_output "${__cctx2}"			\
+		 'cat c.json | jq -rMs "map('${__jval}') | add"')
+
+	TEST_ONE_subs="$(list_add_pair "${TEST_ONE_subs}"
"__${__var}__" "${__bw}" )"
+}
+
 test_one_line() {
 	__line="${1}"
 
@@ -177,6 +216,12 @@ test_one_line() {
 	"guest2w")
 		pane_or_context_wait guest_2 || TEST_ONE_nok=1
 		;;
+	"mon")
+		pane_or_context_run mon "${__arg}" || TEST_ONE_nok=1
+		;;
+	"monb")
+		pane_or_context_run_bg mon "${__arg}"
+		;;
 	"ns")
 		pane_or_context_run ns "${__arg}" || TEST_ONE_nok=1
 		;;
@@ -292,6 +337,9 @@ test_one_line() {
 	"iperf3")
 		test_iperf3 ${__arg}
 		;;
+	"iperf3m")
+		test_iperf3m ${__arg}
+		;;
 	"set")
 		TEST_ONE_subs="$(list_add_pair "${TEST_ONE_subs}" "__${__arg%%
*}__" "${__arg#* }")"
 		;;
diff --git a/test/migrate/basic b/test/migrate/basic
new file mode 100644
index 00000000..3f11f7d8
--- /dev/null
+++ b/test/migrate/basic
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+#
+# PASST - Plug A Simple Socket Transport
+#  for qemu/UNIX domain socket mode
+#
+# PASTA - Pack A Subtle Tap Abstraction
+#  for network namespace/tap device mode
+#
+# test/migrate/basic - Check basic migration functionality
+#
+# Copyright (c) 2025 Red Hat GmbH
+# Author: Stefano Brivio <sbrivio(a)redhat.com>
+
+g1tools	ip jq dhclient socat cat
+htools	ip jq
+
+set	MAP_HOST4 192.0.2.1
+set	MAP_HOST6 2001:db8:9a55::1
+set	MAP_NS4 192.0.2.2
+set	MAP_NS6 2001:db8:9a55::2
+
+test	Interface name
+g1out	IFNAME1 ip -j link show | jq -rM '.[] | select(.link_type ==
"ether").ifname'
+hout	HOST_IFNAME ip -j -4 route show|jq -rM '[.[] | select(.dst ==
"default").dev] | .[0]'
+hout	HOST_IFNAME6 ip -j -6 route show|jq -rM '[.[] | select(.dst ==
"default").dev] | .[0]'
+check	[ -n "__IFNAME1__" ]
+
+test	DHCP: address
+guest1	ip link set dev __IFNAME1__ up
+guest1	/sbin/dhclient -4 __IFNAME1__
+g1out	ADDR1 ip -j -4 addr show|jq -rM '.[] | select(.ifname ==
"__IFNAME1__").addr_info[0].local'
+hout	HOST_ADDR ip -j -4 addr show|jq -rM '.[] | select(.ifname ==
"__HOST_IFNAME__").addr_info[0].local'
+check	[ "__ADDR1__" = "__HOST_ADDR__" ]
+
+test	DHCPv6: address
+# Link is up now, wait for DAD to complete
+guest1	while ip -j -6 addr show tentative | jq -e '.[].addr_info'; do sleep
0.1; done
+guest1	/sbin/dhclient -6 __IFNAME1__
+# Wait for DAD to complete on the DHCP address
+guest1	while ip -j -6 addr show tentative | jq -e '.[].addr_info'; do sleep
0.1; done
+g1out	ADDR1_6 ip -j -6 addr show|jq -rM '[.[] | select(.ifname ==
"__IFNAME1__").addr_info[] | select(.prefixlen == 128).local] | .[0]'
+hout	HOST_ADDR6 ip -j -6 addr show|jq -rM '[.[] | select(.ifname ==
"__HOST_IFNAME6__").addr_info[] | select(.scope == "global" and
.deprecated != true).local] | .[0]'
+check	[ "__ADDR1_6__" = "__HOST_ADDR6__" ]
+
+test	TCP/IPv4: guest1/guest2 > host
+g1out	GW1 ip -j -4 route show|jq -rM '.[] | select(.dst ==
"default").gateway'
+hostb	socat -u TCP4-LISTEN:10006 OPEN:__STATESETUP__/msg,create,trunc
+sleep	1
+# Option 1: via spliced path in pasta, namespace to host
+# guest1b	{ printf "Hello from guest 1"; sleep 10; printf " and from guest
2\n"; } | socat -u STDIN TCP4:__GW1__:10003
+# Option 2: via --map-guest-addr (tap) in pasta, namespace to host
+guest1b	{ printf "Hello from guest 1"; sleep 3; printf " and from guest
2\n"; } | socat -u STDIN TCP4:__MAP_HOST4__:10006
+sleep	1
+
+mon	echo "migrate tcp:0:20005" | socat -u STDIN
UNIX:__STATESETUP__/qemu_1_mon.sock
+
+hostw
+hout	MSG cat __STATESETUP__/msg
+check	[ "__MSG__" = "Hello from guest 1 and from guest 2" ]
diff --git a/test/migrate/bidirectional b/test/migrate/bidirectional
new file mode 100644
index 00000000..4c040818
--- /dev/null
+++ b/test/migrate/bidirectional
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+#
+# PASST - Plug A Simple Socket Transport
+#  for qemu/UNIX domain socket mode
+#
+# PASTA - Pack A Subtle Tap Abstraction
+#  for network namespace/tap device mode
+#
+# test/migrate/bidirectional - Check migration with messages in both directions
+#
+# Copyright (c) 2025 Red Hat GmbH
+# Author: Stefano Brivio <sbrivio(a)redhat.com>
+
+g1tools	ip jq dhclient socat cat
+htools	ip jq
+
+set	MAP_HOST4 192.0.2.1
+set	MAP_HOST6 2001:db8:9a55::1
+set	MAP_NS4 192.0.2.2
+set	MAP_NS6 2001:db8:9a55::2
+
+test	Interface name
+g1out	IFNAME1 ip -j link show | jq -rM '.[] | select(.link_type ==
"ether").ifname'
+hout	HOST_IFNAME ip -j -4 route show|jq -rM '[.[] | select(.dst ==
"default").dev] | .[0]'
+hout	HOST_IFNAME6 ip -j -6 route show|jq -rM '[.[] | select(.dst ==
"default").dev] | .[0]'
+check	[ -n "__IFNAME1__" ]
+
+test	DHCP: address
+guest1	ip link set dev __IFNAME1__ up
+guest1	/sbin/dhclient -4 __IFNAME1__
+g1out	ADDR1 ip -j -4 addr show|jq -rM '.[] | select(.ifname ==
"__IFNAME1__").addr_info[0].local'
+hout	HOST_ADDR ip -j -4 addr show|jq -rM '.[] | select(.ifname ==
"__HOST_IFNAME__").addr_info[0].local'
+check	[ "__ADDR1__" = "__HOST_ADDR__" ]
+
+test	TCP/IPv4: guest1/guest2 > host, host > guest1/guest2
+g1out	GW1 ip -j -4 route show|jq -rM '.[] | select(.dst ==
"default").gateway'
+
+hostb	socat -u TCP4-LISTEN:10006 OPEN:__STATESETUP__/msg,create,trunc
+guest1b	socat -u TCP4-LISTEN:10001 OPEN:msg,create,trunc
+sleep	1
+
+guest1b	socat -u UNIX-RECV:proxy.sock,null-eof TCP4:__MAP_HOST4__:10006
+hostb	socat -u UNIX-RECV:__STATESETUP__/proxy.sock,null-eof TCP4:__ADDR1__:10001
+sleep	1
+guest1	printf "Hello from guest 1" | socat -u STDIN UNIX:proxy.sock
+host	printf "Dear guest 1," | socat -u STDIN UNIX:__STATESETUP__/proxy.sock
+sleep	1
+
+mon	echo "migrate tcp:0:20005" | socat -u STDIN
UNIX:__STATESETUP__/qemu_1_mon.sock
+
+sleep	2
+guest2	printf " and from guest 2" | socat -u STDIN UNIX:proxy.sock,shut-null
+host	printf " you are now guest 2" | socat -u STDIN
UNIX:__STATESETUP__/proxy.sock,shut-null
+
+hostw
+# FIXME: guest2w doesn't work here because shell jobs are (also) from guest #1,
+# use sleep 1 for the moment
+sleep	1
+
+hout	MSG cat __STATESETUP__/msg
+check	[ "__MSG__" = "Hello from guest 1 and from guest 2" ]
+
+g2out	MSG cat msg
+check	[ "__MSG__" = "Dear guest 1, you are now guest 2" ]
diff --git a/test/migrate/iperf3_bidir6 b/test/migrate/iperf3_bidir6
new file mode 100644
index 00000000..9cb198c8
--- /dev/null
+++ b/test/migrate/iperf3_bidir6
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+#
+# PASST - Plug A Simple Socket Transport
+#  for qemu/UNIX domain socket mode
+#
+# PASTA - Pack A Subtle Tap Abstraction
+#  for network namespace/tap device mode
+#
+# test/migrate/iperf3_bidir6 - Migration behaviour with many flows
+#
+# Copyright (c) 2025 Red Hat GmbH
+# Author: Stefano Brivio <sbrivio(a)redhat.com>
+
+g1tools	ip jq dhclient socat cat
+htools	ip jq
+
+set	MAP_HOST4 192.0.2.1
+set	MAP_HOST6 2001:db8:9a55::1
+set	MAP_NS4 192.0.2.2
+set	MAP_NS6 2001:db8:9a55::2
+
+set	THREADS 128
+set	TIME 3
+set	OMIT 0.1
+set	OPTS -Z -P __THREADS__ -O__OMIT__ -N --bidir
+
+test	Interface name
+g1out	IFNAME1 ip -j link show | jq -rM '.[] | select(.link_type ==
"ether").ifname'
+hout	HOST_IFNAME ip -j -4 route show|jq -rM '[.[] | select(.dst ==
"default").dev] | .[0]'
+hout	HOST_IFNAME6 ip -j -6 route show|jq -rM '[.[] | select(.dst ==
"default").dev] | .[0]'
+check	[ -n "__IFNAME1__" ]
+
+test	DHCP: address
+guest1	ip link set dev __IFNAME1__ up
+guest1	/sbin/dhclient -4 __IFNAME1__
+g1out	ADDR1 ip -j -4 addr show|jq -rM '.[] | select(.ifname ==
"__IFNAME1__").addr_info[0].local'
+hout	HOST_ADDR ip -j -4 addr show|jq -rM '.[] | select(.ifname ==
"__HOST_IFNAME__").addr_info[0].local'
+check	[ "__ADDR1__" = "__HOST_ADDR__" ]
+
+test	DHCPv6: address
+# Link is up now, wait for DAD to complete
+guest1	while ip -j -6 addr show tentative | jq -e '.[].addr_info'; do sleep
0.1; done
+guest1	/sbin/dhclient -6 __IFNAME1__
+# Wait for DAD to complete on the DHCP address
+guest1	while ip -j -6 addr show tentative | jq -e '.[].addr_info'; do sleep
0.1; done
+g1out	ADDR1_6 ip -j -6 addr show|jq -rM '[.[] | select(.ifname ==
"__IFNAME1__").addr_info[] | select(.prefixlen == 128).local] | .[0]'
+hout	HOST_ADDR6 ip -j -6 addr show|jq -rM '[.[] | select(.ifname ==
"__HOST_IFNAME6__").addr_info[] | select(.scope == "global" and
.deprecated != true).local] | .[0]'
+check	[ "__ADDR1_6__" = "__HOST_ADDR6__" ]
+
+test	TCP/IPv6 host to guest throughput during migration
+
+monb	sleep 1; echo "migrate tcp:0:20005" | socat -u STDIN
UNIX:__STATESETUP__/qemu_1_mon.sock
+
+iperf3s	host 10006
+iperf3m	BW guest_1 guest_2 __MAP_HOST6__ 10006 __TIME__ __OPTS__
+bw	__BW__ 1 2
+
+iperf3k	host
diff --git a/test/migrate/iperf3_in4 b/test/migrate/iperf3_in4
new file mode 100644
index 00000000..1fd854d9
--- /dev/null
+++ b/test/migrate/iperf3_in4
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+#
+# PASST - Plug A Simple Socket Transport
+#  for qemu/UNIX domain socket mode
+#
+# PASTA - Pack A Subtle Tap Abstraction
+#  for network namespace/tap device mode
+#
+# test/migrate/iperf3_out4 - Migration behaviour under outbound IPv4 flood
+#
+# Copyright (c) 2025 Red Hat GmbH
+# Author: Stefano Brivio <sbrivio(a)redhat.com>
+
+g1tools	ip jq dhclient socat cat
+htools	ip jq
+
+set	MAP_HOST4 192.0.2.1
+set	MAP_HOST6 2001:db8:9a55::1
+set	MAP_NS4 192.0.2.2
+set	MAP_NS6 2001:db8:9a55::2
+
+guest1	/sbin/sysctl -w net.core.rmem_max=33554432
+guest1	/sbin/sysctl -w net.core.wmem_max=33554432
+
+set	THREADS 1
+set	TIME 4
+set	OMIT 0.1
+set	OPTS -Z -P __THREADS__ -O__OMIT__ -N -R
+
+test	Interface name
+g1out	IFNAME1 ip -j link show | jq -rM '.[] | select(.link_type ==
"ether").ifname'
+hout	HOST_IFNAME ip -j -4 route show|jq -rM '[.[] | select(.dst ==
"default").dev] | .[0]'
+check	[ -n "__IFNAME1__" ]
+
+test	DHCP: address
+guest1	ip link set dev __IFNAME1__ up
+guest1	/sbin/dhclient -4 __IFNAME1__
+g1out	ADDR1 ip -j -4 addr show|jq -rM '.[] | select(.ifname ==
"__IFNAME1__").addr_info[0].local'
+hout	HOST_ADDR ip -j -4 addr show|jq -rM '.[] | select(.ifname ==
"__HOST_IFNAME__").addr_info[0].local'
+check	[ "__ADDR1__" = "__HOST_ADDR__" ]
+
+test	TCP/IPv4 host to guest throughput during migration
+
+monb	sleep 1; echo "migrate tcp:0:20005" | socat -u STDIN
UNIX:__STATESETUP__/qemu_1_mon.sock
+
+iperf3s	host 10006
+iperf3m	BW guest_1 guest_2 __MAP_HOST4__ 10006 __TIME__ __OPTS__
+bw	__BW__ 1 2
+
+iperf3k	host
diff --git a/test/migrate/iperf3_in6 b/test/migrate/iperf3_in6
new file mode 100644
index 00000000..b727929c
--- /dev/null
+++ b/test/migrate/iperf3_in6
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+#
+# PASST - Plug A Simple Socket Transport
+#  for qemu/UNIX domain socket mode
+#
+# PASTA - Pack A Subtle Tap Abstraction
+#  for network namespace/tap device mode
+#
+# test/migrate/iperf3_out6 - Migration behaviour under outbound IPv6 flood
+#
+# Copyright (c) 2025 Red Hat GmbH
+# Author: Stefano Brivio <sbrivio(a)redhat.com>
+
+g1tools	ip jq dhclient socat cat
+htools	ip jq
+
+set	MAP_HOST4 192.0.2.1
+set	MAP_HOST6 2001:db8:9a55::1
+set	MAP_NS4 192.0.2.2
+set	MAP_NS6 2001:db8:9a55::2
+
+set	THREADS 4
+set	TIME 3
+set	OMIT 0.1
+set	OPTS -Z -P __THREADS__ -O__OMIT__ -N -R
+
+test	Interface name
+g1out	IFNAME1 ip -j link show | jq -rM '.[] | select(.link_type ==
"ether").ifname'
+hout	HOST_IFNAME ip -j -4 route show|jq -rM '[.[] | select(.dst ==
"default").dev] | .[0]'
+hout	HOST_IFNAME6 ip -j -6 route show|jq -rM '[.[] | select(.dst ==
"default").dev] | .[0]'
+check	[ -n "__IFNAME1__" ]
+
+test	DHCP: address
+guest1	ip link set dev __IFNAME1__ up
+guest1	/sbin/dhclient -4 __IFNAME1__
+g1out	ADDR1 ip -j -4 addr show|jq -rM '.[] | select(.ifname ==
"__IFNAME1__").addr_info[0].local'
+hout	HOST_ADDR ip -j -4 addr show|jq -rM '.[] | select(.ifname ==
"__HOST_IFNAME__").addr_info[0].local'
+check	[ "__ADDR1__" = "__HOST_ADDR__" ]
+
+test	DHCPv6: address
+# Link is up now, wait for DAD to complete
+guest1	while ip -j -6 addr show tentative | jq -e '.[].addr_info'; do sleep
0.1; done
+guest1	/sbin/dhclient -6 __IFNAME1__
+# Wait for DAD to complete on the DHCP address
+guest1	while ip -j -6 addr show tentative | jq -e '.[].addr_info'; do sleep
0.1; done
+g1out	ADDR1_6 ip -j -6 addr show|jq -rM '[.[] | select(.ifname ==
"__IFNAME1__").addr_info[] | select(.prefixlen == 128).local] | .[0]'
+hout	HOST_ADDR6 ip -j -6 addr show|jq -rM '[.[] | select(.ifname ==
"__HOST_IFNAME6__").addr_info[] | select(.scope == "global" and
.deprecated != true).local] | .[0]'
+check	[ "__ADDR1_6__" = "__HOST_ADDR6__" ]
+
+test	TCP/IPv6 host to guest throughput during migration
+
+monb	sleep 1; echo "migrate tcp:0:20005" | socat -u STDIN
UNIX:__STATESETUP__/qemu_1_mon.sock
+
+iperf3s	host 10006
+iperf3m	BW guest_1 guest_2 __MAP_HOST6__ 10006 __TIME__ __OPTS__
+bw	__BW__ 1 2
+
+iperf3k	host
diff --git a/test/migrate/iperf3_out4 b/test/migrate/iperf3_out4
new file mode 100644
index 00000000..0122684c
--- /dev/null
+++ b/test/migrate/iperf3_out4
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+#
+# PASST - Plug A Simple Socket Transport
+#  for qemu/UNIX domain socket mode
+#
+# PASTA - Pack A Subtle Tap Abstraction
+#  for network namespace/tap device mode
+#
+# test/migrate/iperf3_out4 - Migration behaviour under outbound IPv4 flood
+#
+# Copyright (c) 2025 Red Hat GmbH
+# Author: Stefano Brivio <sbrivio(a)redhat.com>
+
+g1tools	ip jq dhclient socat cat
+htools	ip jq
+
+set	MAP_HOST4 192.0.2.1
+set	MAP_HOST6 2001:db8:9a55::1
+set	MAP_NS4 192.0.2.2
+set	MAP_NS6 2001:db8:9a55::2
+
+guest1	/sbin/sysctl -w net.core.rmem_max=33554432
+guest1	/sbin/sysctl -w net.core.wmem_max=33554432
+
+set	THREADS 2
+set	TIME 3
+set	OMIT 0.1
+set	OPTS -Z -P __THREADS__ -O__OMIT__ -N
+
+test	Interface name
+g1out	IFNAME1 ip -j link show | jq -rM '.[] | select(.link_type ==
"ether").ifname'
+hout	HOST_IFNAME ip -j -4 route show|jq -rM '[.[] | select(.dst ==
"default").dev] | .[0]'
+check	[ -n "__IFNAME1__" ]
+
+test	DHCP: address
+guest1	ip link set dev __IFNAME1__ up
+guest1	/sbin/dhclient -4 __IFNAME1__
+g1out	ADDR1 ip -j -4 addr show|jq -rM '.[] | select(.ifname ==
"__IFNAME1__").addr_info[0].local'
+hout	HOST_ADDR ip -j -4 addr show|jq -rM '.[] | select(.ifname ==
"__HOST_IFNAME__").addr_info[0].local'
+check	[ "__ADDR1__" = "__HOST_ADDR__" ]
+
+test	TCP/IPv4 guest to host throughput during migration
+
+monb	sleep 1; echo "migrate tcp:0:20005" | socat -u STDIN
UNIX:__STATESETUP__/qemu_1_mon.sock
+
+iperf3s	host 10006
+iperf3m	BW guest_1 guest_2 __MAP_HOST4__ 10006 __TIME__ __OPTS__ -l 1M
+bw	__BW__ 1 2
+
+iperf3k	host
diff --git a/test/migrate/iperf3_out6 b/test/migrate/iperf3_out6
new file mode 100644
index 00000000..9cb13b0c
--- /dev/null
+++ b/test/migrate/iperf3_out6
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+#
+# PASST - Plug A Simple Socket Transport
+#  for qemu/UNIX domain socket mode
+#
+# PASTA - Pack A Subtle Tap Abstraction
+#  for network namespace/tap device mode
+#
+# test/migrate/iperf3_out6 - Migration behaviour under outbound IPv6 flood
+#
+# Copyright (c) 2025 Red Hat GmbH
+# Author: Stefano Brivio <sbrivio(a)redhat.com>
+
+g1tools	ip jq dhclient socat cat
+htools	ip jq
+
+set	MAP_HOST4 192.0.2.1
+set	MAP_HOST6 2001:db8:9a55::1
+set	MAP_NS4 192.0.2.2
+set	MAP_NS6 2001:db8:9a55::2
+
+set	THREADS 1
+set	TIME 3
+set	OMIT 0.1
+set	OPTS -Z -P __THREADS__ -O__OMIT__ -N
+
+test	Interface name
+g1out	IFNAME1 ip -j link show | jq -rM '.[] | select(.link_type ==
"ether").ifname'
+hout	HOST_IFNAME ip -j -4 route show|jq -rM '[.[] | select(.dst ==
"default").dev] | .[0]'
+hout	HOST_IFNAME6 ip -j -6 route show|jq -rM '[.[] | select(.dst ==
"default").dev] | .[0]'
+check	[ -n "__IFNAME1__" ]
+
+test	DHCP: address
+guest1	ip link set dev __IFNAME1__ up
+guest1	/sbin/dhclient -4 __IFNAME1__
+g1out	ADDR1 ip -j -4 addr show|jq -rM '.[] | select(.ifname ==
"__IFNAME1__").addr_info[0].local'
+hout	HOST_ADDR ip -j -4 addr show|jq -rM '.[] | select(.ifname ==
"__HOST_IFNAME__").addr_info[0].local'
+check	[ "__ADDR1__" = "__HOST_ADDR__" ]
+
+test	DHCPv6: address
+# Link is up now, wait for DAD to complete
+guest1	while ip -j -6 addr show tentative | jq -e '.[].addr_info'; do sleep
0.1; done
+guest1	/sbin/dhclient -6 __IFNAME1__
+# Wait for DAD to complete on the DHCP address
+guest1	while ip -j -6 addr show tentative | jq -e '.[].addr_info'; do sleep
0.1; done
+g1out	ADDR1_6 ip -j -6 addr show|jq -rM '[.[] | select(.ifname ==
"__IFNAME1__").addr_info[] | select(.prefixlen == 128).local] | .[0]'
+hout	HOST_ADDR6 ip -j -6 addr show|jq -rM '[.[] | select(.ifname ==
"__HOST_IFNAME6__").addr_info[] | select(.scope == "global" and
.deprecated != true).local] | .[0]'
+check	[ "__ADDR1_6__" = "__HOST_ADDR6__" ]
+
+test	TCP/IPv6 guest to host throughput during migration
+
+monb	sleep 1; echo "migrate tcp:0:20005" | socat -u STDIN
UNIX:__STATESETUP__/qemu_1_mon.sock
+
+iperf3s	host 10006
+iperf3m	BW guest_1 guest_2 __MAP_HOST6__ 10006 __TIME__ __OPTS__ -l 1M
+bw	__BW__ 1 2
+
+iperf3k	host
diff --git a/test/migrate/rampstream_in b/test/migrate/rampstream_in
index 46f41431..74223da0 100644
--- a/test/migrate/rampstream_in
+++ b/test/migrate/rampstream_in
@@ -6,10 +6,10 @@
 # PASTA - Pack A Subtle Tap Abstraction
 #  for network namespace/tap device mode
 #
-# test/migrate/basic - Check basic migration functionality
+# test/migrate/rampstream_in - Check sequence correctness with inbound ramp
 #
-# Copyright (c) 2025 Red Hat GmbH
-# Author: Stefano Brivio <sbrivio(a)redhat.com>
+# Copyright (c) 2025 Red Hat
+# Author: David Gibson <david(a)gibson.dropbear.id.au>
 
 g1tools	ip jq dhclient socat cat
 htools	ip jq
@@ -49,9 +49,9 @@ guest1b	socat -u TCP4-LISTEN:10001 EXEC:"rampstream-check.sh
__RAMPS__"
 sleep	1
 hostb	socat -u EXEC:"test/rampstream send __RAMPS__" TCP4:__ADDR1__:10001
 
-sleep 1
+sleep	1
 
-#mon	echo "migrate tcp:0:20005" | socat -u STDIN
UNIX:__STATESETUP__/qemu_1_mon.sock
+monb	echo "migrate tcp:0:20005" | socat -u STDIN
UNIX:__STATESETUP__/qemu_1_mon.sock
 
 hostw
 
diff --git a/test/migrate/rampstream_out b/test/migrate/rampstream_out
index 91b9c631..85dd5482 100644
--- a/test/migrate/rampstream_out
+++ b/test/migrate/rampstream_out
@@ -6,10 +6,10 @@
 # PASTA - Pack A Subtle Tap Abstraction
 #  for network namespace/tap device mode
 #
-# test/migrate/basic - Check basic migration functionality
+# test/migrate/rampstream_out - Check sequence correctness with outbound ramp
 #
-# Copyright (c) 2025 Red Hat GmbH
-# Author: Stefano Brivio <sbrivio(a)redhat.com>
+# Copyright (c) 2025 Red Hat
+# Author: David Gibson <david(a)gibson.dropbear.id.au>
 
 g1tools	ip jq dhclient socat cat
 htools	ip jq
diff --git a/test/run b/test/run
index fc710475..080cbd6b 100755
--- a/test/run
+++ b/test/run
@@ -73,6 +73,7 @@ run() {
 	test build/clang_tidy
 	teardown build
 
+
 	setup pasta
 	test pasta/ndp
 	test pasta/dhcp
@@ -130,6 +131,34 @@ run() {
 	test two_guests_vu/basic
 	teardown two_guests
 
+	setup migrate
+	test migrate/basic
+	teardown migrate
+	setup migrate
+	test migrate/bidirectional
+	teardown migrate
+	setup migrate
+	test migrate/iperf3_out4
+	teardown migrate
+	setup migrate
+	test migrate/iperf3_out6
+	teardown migrate
+	setup migrate
+	test migrate/iperf3_in4
+	teardown migrate
+	setup migrate
+	test migrate/iperf3_in6
+	teardown migrate
+	setup migrate
+	test migrate/iperf3_bidir6
+	teardown migrate
+	setup migrate
+	test migrate/rampstream_in
+	teardown migrate
+	setup migrate
+	test migrate/rampstream_out
+	teardown migrate
+
 	VALGRIND=0
 	VHOST_USER=0
 	#setup passt_in_ns
@@ -186,7 +215,10 @@ run_selected() {
 
 	__setup=
 	for __test; do
-		if [ "${__test%%/*}" != "${__setup}" ]; then
+		# HACK: the migrate tests need the setup repeated for
+		#       each test
+		if [ "${__test%%/*}" != "${__setup}" -o		\
+		     "${__test%%/*}" = "migrate" ]; then
 			[ -n "${__setup}" ] && teardown "${__setup}"
 			__setup="${__test%%/*}"
 			setup "${__setup}"
-- 
2.48.1